In anti-seismic calculation, the mode truncation is a significant problem to engineers if the mode-superposition response spectrum method is used, which has not been completely solved yet in some large and complex str...In anti-seismic calculation, the mode truncation is a significant problem to engineers if the mode-superposition response spectrum method is used, which has not been completely solved yet in some large and complex structures such as reticulated domes. In this case, some useful advices, concentrating on the problem above, are expected through a careful and comprehensive investigation of this paper. During the investigation, the authors first point out shortcomings of former researches. Then frequency-spectrum characteristics of single-layered reticulated domes were studied from the perspective of structural responses. During this process, some important results such as the existence of the main resonant section, and the fact that the relative sensitivity of these domes under horizontal and vertical impulse varies with the different R/S ratios were achieved. Furthermore, based on the study of frequency-spectrum characteristics, as well as that of earthquake input, reasonable numbers of mode truncation in single layered reticulated domes with different R/S ratio were presented. Results of case studies prove the mode truncation number proposed is valid.展开更多
Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understandin...Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.展开更多
The paper presents the theory of Hamilton variation principle which is the current method for impact problem, central difference method which is efficient solution of finite element (FE) method for impact problem and ...The paper presents the theory of Hamilton variation principle which is the current method for impact problem, central difference method which is efficient solution of finite element (FE) method for impact problem and adapts to solve non-linear dynamic problem. And it introduces the ANSYS/LS-DYNA which is the popular FE software for impact problem both at home and abroad. Then it gives solutions for one simple model by analytical method and ANSYS/LS-DYNA respec-tively to validate function of software, and they are consistent. Afterward, it gives model of single-layer Kiewitt reticulated dome with a span of 60 m, and the cylinder impactor, and introduces the contact interface arithmetic, especially the material model of steel (piecewise linear plasticity model) which takes stain rate into account and makes steel failure stress higher under impact loads. The vertical displacement, stress in main members, and the plastic deformation for dome under impact loads were obtained. Then four failure modes (no failure, moderate failure, global failure and slight failure) were summarized according to the rules of dynamic response. And the characteristics of dynamic response for each failure mode were shown.展开更多
No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the...No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.展开更多
To study the damage mechanism of single-layer reticulated domes subject to severe earthquakes, three limit states of single-layer reticulated domes under earthquakes are defined firstly in this paper. Then, two failur...To study the damage mechanism of single-layer reticulated domes subject to severe earthquakes, three limit states of single-layer reticulated domes under earthquakes are defined firstly in this paper. Then, two failure modes are presented by analyzing damage behaviors, and their characteristics are pointed out respectively. Furthermore, the damage process is analyzed and the causes of structural damage in different levels are studied. Finally, by comparing deformation and vibration status of domes with different failure modes, the principles of different failures are revealed and an integrated frame of damage mechanism is set up.展开更多
Single-layer reticulated shells(SLRSs)find widespread application in the roofs of crucial public structures,such as gymnasiums and exhibition center.In this paper,a new neural-network-based method for structural damag...Single-layer reticulated shells(SLRSs)find widespread application in the roofs of crucial public structures,such as gymnasiums and exhibition center.In this paper,a new neural-network-based method for structural damage identification in SLRSs is proposed.First,a damage vector index,NDL,that is related only to the damage localization,is proposed for SLRSs,and a damage data set is constructed from NDL data.On the basis of visualization of the NDL damage data set,the structural damaged region locations are identified using convolutional neural networks(CNNs).By cross-dividing the damaged region locations and using parallel CNNs for each regional location,the damaged region locations can be quickly and efficiently identified and the undamaged region locations can be eliminated.Second,a damage vector index,DS,that is related to the damage location and damage degree,is proposed for SLRSs.Based on the damaged region identified previously,a fully connected neural network(FCNN)is constructed to identify the location and damage degree of members.The effectiveness and reliability of the proposed method are verified by considering a numerical case of a spherical SLRS.The calculation results showed that the proposed method can quickly eliminate candidate locations of potential damaged region locations and precisely determine the location and damage degree of members.展开更多
Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temper...Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temperature variations due to dynamic environmental coupling.These differences can affect structural performance and pose safety risks.Here,a systematic numerical method was developed and applied to simulate long-term temperature variations in such a structure under real environmental conditions,revealing its non-uniform distribution characteristics and time-variant regularity.A simplified design method for non-uniform thermal loads,accounting for time-variant environmental factors,was theoretically derived and validated through experiments and simulations.The maximum deviation and mean error rate between calculated and tested results were 6.1℃ and 3.7%,respectively.Calculated temperature fields aligned with simulated ones,with deviations under 6.0℃.Using the design method,non-uniform thermal effects of the structure are analyzed.Maximum member stress and nodal displacement under non-uniform thermal loads reached 119.3 MPa and 19.7 mm,representing increases of 167.5%and 169.9%,respectively,compared to uniform thermal loads.The impacts of healing construction time on non-uniform thermal effects were evaluated,resulting in construction recommendations.The methodologies and conclusions presented here can serve as valuable references for the thermal design,construction,and control of single-layer spherical reticulated shells or similar structures.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.50338010).
文摘In anti-seismic calculation, the mode truncation is a significant problem to engineers if the mode-superposition response spectrum method is used, which has not been completely solved yet in some large and complex structures such as reticulated domes. In this case, some useful advices, concentrating on the problem above, are expected through a careful and comprehensive investigation of this paper. During the investigation, the authors first point out shortcomings of former researches. Then frequency-spectrum characteristics of single-layered reticulated domes were studied from the perspective of structural responses. During this process, some important results such as the existence of the main resonant section, and the fact that the relative sensitivity of these domes under horizontal and vertical impulse varies with the different R/S ratios were achieved. Furthermore, based on the study of frequency-spectrum characteristics, as well as that of earthquake input, reasonable numbers of mode truncation in single layered reticulated domes with different R/S ratio were presented. Results of case studies prove the mode truncation number proposed is valid.
基金financial support from the China Postdoctora Science Foundation(project No.2021M690406)financial supports from the National Natural Science Foundation of China(project No.51708521,51778183)。
文摘Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.
基金Supported by National Natural Science Foundation of China(No.90715034)
文摘The paper presents the theory of Hamilton variation principle which is the current method for impact problem, central difference method which is efficient solution of finite element (FE) method for impact problem and adapts to solve non-linear dynamic problem. And it introduces the ANSYS/LS-DYNA which is the popular FE software for impact problem both at home and abroad. Then it gives solutions for one simple model by analytical method and ANSYS/LS-DYNA respec-tively to validate function of software, and they are consistent. Afterward, it gives model of single-layer Kiewitt reticulated dome with a span of 60 m, and the cylinder impactor, and introduces the contact interface arithmetic, especially the material model of steel (piecewise linear plasticity model) which takes stain rate into account and makes steel failure stress higher under impact loads. The vertical displacement, stress in main members, and the plastic deformation for dome under impact loads were obtained. Then four failure modes (no failure, moderate failure, global failure and slight failure) were summarized according to the rules of dynamic response. And the characteristics of dynamic response for each failure mode were shown.
基金Supported by National Natural Science Foundation of China(No.90715034)
文摘No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.
基金Sponsored by the National Natural Science Foundation of China(Grant No.90715034)
文摘To study the damage mechanism of single-layer reticulated domes subject to severe earthquakes, three limit states of single-layer reticulated domes under earthquakes are defined firstly in this paper. Then, two failure modes are presented by analyzing damage behaviors, and their characteristics are pointed out respectively. Furthermore, the damage process is analyzed and the causes of structural damage in different levels are studied. Finally, by comparing deformation and vibration status of domes with different failure modes, the principles of different failures are revealed and an integrated frame of damage mechanism is set up.
基金the financial support provided by the National Natural Science Foundation of China(Grant No.51478335).
文摘Single-layer reticulated shells(SLRSs)find widespread application in the roofs of crucial public structures,such as gymnasiums and exhibition center.In this paper,a new neural-network-based method for structural damage identification in SLRSs is proposed.First,a damage vector index,NDL,that is related only to the damage localization,is proposed for SLRSs,and a damage data set is constructed from NDL data.On the basis of visualization of the NDL damage data set,the structural damaged region locations are identified using convolutional neural networks(CNNs).By cross-dividing the damaged region locations and using parallel CNNs for each regional location,the damaged region locations can be quickly and efficiently identified and the undamaged region locations can be eliminated.Second,a damage vector index,DS,that is related to the damage location and damage degree,is proposed for SLRSs.Based on the damaged region identified previously,a fully connected neural network(FCNN)is constructed to identify the location and damage degree of members.The effectiveness and reliability of the proposed method are verified by considering a numerical case of a spherical SLRS.The calculation results showed that the proposed method can quickly eliminate candidate locations of potential damaged region locations and precisely determine the location and damage degree of members.
基金This work is supported by the National Natural Science Foundation of China(Nos.51578491 and 52238001).
文摘Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temperature variations due to dynamic environmental coupling.These differences can affect structural performance and pose safety risks.Here,a systematic numerical method was developed and applied to simulate long-term temperature variations in such a structure under real environmental conditions,revealing its non-uniform distribution characteristics and time-variant regularity.A simplified design method for non-uniform thermal loads,accounting for time-variant environmental factors,was theoretically derived and validated through experiments and simulations.The maximum deviation and mean error rate between calculated and tested results were 6.1℃ and 3.7%,respectively.Calculated temperature fields aligned with simulated ones,with deviations under 6.0℃.Using the design method,non-uniform thermal effects of the structure are analyzed.Maximum member stress and nodal displacement under non-uniform thermal loads reached 119.3 MPa and 19.7 mm,representing increases of 167.5%and 169.9%,respectively,compared to uniform thermal loads.The impacts of healing construction time on non-uniform thermal effects were evaluated,resulting in construction recommendations.The methodologies and conclusions presented here can serve as valuable references for the thermal design,construction,and control of single-layer spherical reticulated shells or similar structures.