Industrial frequency single-phase AC traction power supply system for urban rail transit and its key technologies

To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.

不平衡电网下AC-DC矩阵变换器的新型模型预测控制

为降低AC-DC矩阵变换器在输入不平衡条件下网侧有功功率波动,以及离散型模型预测控制中开关频率不固定的问题,提出一种新型模型预测控制方法。通过根据电网电流相位角选择有效矢量,避免了传统模型预测控制评估价值函数计算的负担。提出了一种二阶扩展复数卡尔曼滤波器,计算精度可以达到泰勒级数展开的二阶项,新型模型预测控制能够在不平衡电网系统中应用。仿真结果表明:所提控制策略在输入电压不平衡工况下,能够有效抑制网侧电流谐波,稳定系统输出的有功功率,并且表现出良好的性能。

基于ACE与YOLOv5的电力遥感图像检测算法

针对电力遥感图像采集时存在大量浓烟以及数据样本少等问题,提出一种基于对数变换的改进型自动色彩均衡与改进后YOLOv5s模型的遥感图像去雾检测算法,旨在通过提高数据集的图像质量进而提高检测网络的检测精度。构建的改进型自动色彩均衡对电力遥感图像去雾增强,并通过图像质量和特征提取两方面进行了实验数据对比,实验结果表明改进的自动色彩均衡算法优于其它算法。其次,通过YOLOv5s检测算法对增强后的数据集进行训练,引入mosaic数据增强算法,并通过构建ghost卷积模块和NAM注意力模块降低了网络参数、提升了网络检测精度。

Electrical characteristics of new three-phase traction power supply system for rail transit

A novel three-phase traction power supply system is proposed to eliminate the adverse effects caused by electric phase separation in catenary and accomplish a unifying manner of traction power supply for rail transit.With the application of two-stage three-phase continuous power supply structure,the electrical characteristics exhibit new features differing from the existing traction system.In this work,the principle for voltage levels determining two-stage network is dissected in accordance with the requirements of traction network and electric locomotive.The equivalent model of three-phase traction system is built for deducing the formula of current distribution and voltage losses.Based on the chain network model of the traction network,a simulation model is established to analyze the electrical characteristics such as traction current distribution,voltage losses,system equivalent impedance,voltage distribution,voltage unbalance and regenerative energy utilization.In a few words,quite a lot traction current of about 99%is undertaken by long-section cable network.The proportion of system voltage losses is small attributed to the two-stage three-phase power supply structure,and the voltage unbal-ance caused by impedance asymmetry of traction network is less than 1‰.In addition,the utilization rate of regenerative energy for locomotive achieves a significant promotion of over 97%.

Systematic Evaluation of Deep Neural Network based Dynamic Modeling Method for AC Power Electronic System

Since the high penetration of renewable energy complicates the dynamic characteristics of the AC power electronic system(ACPES),it is essential to establish an accurate dynamic model to obtain its dynamic behavior for ensure the safe and stable operation of the system.However,due to the no or limited internal control details,the state-space modeling method cannot be realized.It leads to the ACPES system becoming a black-box dynamic system.The dynamic modeling method based on deep neural network can simulate the dynamic behavior using port data without obtaining internal control details.However,deep neural network modeling methods are rarely systematically evaluated.In practice,the construction of neural network faces the selection of massive data and various network structure parameters.However,different sample distributions make the trained network performance quite different.Different network structure hyperparameters also mean different convergence time.Due to the lack of systematic evaluation and targeted suggestions,neural network modeling with high precision and high training speed cannot be realized quickly and conveniently in practical engineering applications.To fill this gap,this paper systematically evaluates the deep neural network from sample distribution and structural hyperparameter selection.The influence on modeling accuracy is analyzed in detail,then some modeling suggestions are presented.Simulation results under multiple operating points verify the effectiveness of the proposed method.

基于改进MFAC的交直流微电网分布式二次控制

针对现有交直流微电网分布式二次控制(distributed secondarycontrol,DSC)受分布式电源一次控制参数影响较大、通信拓扑结构复杂、二次控制参数难以整定等问题,提出基于改进MFAC的交直流微电网DSC(MFAC-DSC),利用分布式电源的历史采样数据在线估计其动态线性化参数,解决了传统方法受一次控制参数影响较大的问题;通过优化DSC的通信结构和控制策略,避免了互联变流器参与二次控制通信,解决了互联变流器通信失效影响DSC的问题;推导了MFAC-DSC系统收敛性,给出了稳定收敛条件。基于交直流微电网实验平台在多种工况下验证了MFAC-DSC的可行性,与传统的DSC策略的对比结果表明:MFAC-DSC方法有效减少分布式电源下垂系数变化带来的功率波动,保证下垂系数有更大的调节范围,同时解决了互联变流器通信失效造成的控制失效和母线电压偏移等问题。

AC/DC通信电源模块远场电磁辐射发射预测研究

AC/DC通信电源产生的电磁辐射易超过限值,对其电磁辐射机理和预测方法开展研究有助于改善电磁兼容性设计。首先,在分析AC/DC通信电源模块共模电磁噪声的形成源头和传播路径后,提出其远场电磁辐射可分解为由“输入端口”、“输出端口”共模电压驱动的2类辐射。然后,提出将共模电压驱动源与寄生辐射体的辐射传递函数相结合,进行远场电磁辐射预测的新方法;设计频谱分析仪+电阻衰减器,实现各共模电压驱动源的频谱测量;采用FEKO电磁仿真软件,通过数值计算得到各寄生辐射体的辐射传递函数。最后,实现了4 kW AC/DC通信电源模块辐射预测,并实测验证了其有效性。

Consideration of the influence of supports in modeling the electromagnetic fields of 25 kV traction networks under emergency conditions

Single-phase 25 kV traction networks of electrified alternating current(AC)railways create electromagnetic fields(EMFs)with significant levels of intensity.The most intense magnetic fields occur when short circuits exist between the contact wire and rails or ground.Despite the short duration of exposure,they can adversely affect electronic devices and induce significant voltages in adjacent power lines,which is dangerous for operating personnel.Although numerous investigations have focused on modeling the EMF of traction networks and power lines,the challenge of determining the three-dimensional electromagnetic fields near metal supports during the flow of a short-circuit current through them is yet to be resolved.In this case,the field has a complex spatial structure that significantly complicates the calculations of intensities.This study proposes a methodology,algorithms,software,and digital models for determining the EMF in the described emergency scenarios.During the modeling process,the objects being studied were represented by segments of thin wires to analyze the distribution of the electric charge and calculate the intensities of the electric and magnetic fields.This approach was implemented in the Fazonord software,and the modeling results show a substantial increase in EMF levels close to the support,with a noticeable decrease in the levels as the distance from it increases.The procedure implemented in the commercial software Fazonord is universal and can be used to determine electromagnetic fields at any electrical power facility that includes live parts of limited length.Based on the proposed procedure,the EMF near the supports of overhead power lines and traction networks of various designs could be determined,the EMF levels at substations can be calculated,and the influence of metal structures located near traction networks,such as pedestrian crossings at railway stations,can be considered.

隔离型双向AC-DC矩阵变换器闭环控制方法研究

根据隔离型双向AC-DC矩阵变换器(Isolated AC-DC Matrix Converter,IAMC)没有中间电容缓冲环节,输入和输出变换器控制之间存在耦合,研究提出了IAMC两级功率变换器的控制方法。通过对全桥变换器进行闭环控制进而实现对直流侧输出电流和功率的直接控制;三相-单相矩阵变换器实现对有功和无功功率的独立控制,以满足网侧功率因数的高精度控制。所提控制策略有效降低了两级变换器的耦合强度,保证了系统的良好性能。在MATLAB中进行仿真,结果表明,所提出的控制方法在使系统电能质量得到提高的同时,可以实现单位功率因数可调,验证了所提控制策略的正确性和有效性。

Single-Phase to Three-Phase Inverter with Small DC-Link Capacitor for Motor Drive System

The electrolytic-capacitor-less(EL-cap-less)technique has been attracting more and more interests in these years.The EL-cap-less single-phase to three-phase inverter(STI)with front-end diode rectifier is applied to home electrical appliances.In EL-cap-less systems,film-type capacitor is used to suppress the high-frequency ripple components instead of smoothing the DC-link voltage.By using the EL-cap-less solution,reliability can be improved,lifetime can be increased and high power factor(PF)also can be realized.The EL-cap-less STI brings the opportunity to simplify system structure and lower cost.Because a certain DC-link capacitance is still required,the real PF is limited.To further improve the PF,the ripple components of current references are made in synchronous with the DClink voltage.And the capacitance chosen guideline of the film-type capacitor also be presented.A prototype is built to verify its real performance.

Unified algorithm of single-phase active AC-DC converters and its applications

This paper discusses a novel boost single-phase active AC-DC converters, named low-end semi-controlled bridge AC-DC converter. By analysis, its topology and principle can be derived from the conventional single-phase power factor corrector （ PFC）. But it has also some differences, such as power device positions, inductor type, input voltage waveform detection and induction current detection, so its design is also different. The converter is implemented by employing two current detection approaches, i.e., current transformer detection and shunt resistor detection. Consequently, it can provide a steady DC output voltage with a low voltage ripple, approximately unitary input power factor and 2.5 kW output power. The experimental results show validity of the theoretical analysis.

HC-55 Single-Phase AC Series-Excitation Commutator Motor

The HC-55 single-phase AC series-excitation commutator motor exported to Japan by the Linquan Motor Factory is an open-type motor characterized by simple structure, small volume, high rotary speed, large starting torque, reliable operation and easy installation. It can be used as a driving component for various kinds of household electrical appliances, such as electric mills, pulverlizers, small stirrers, vacuum cleaners and electric hair dryers, an ideal product for electrical equipment.

A Novel Topology of Single-Phase AC-DC Integrated Boost-SEPIC (IBS) Converter Using Common Part Sharing Method (CPSM) for High Step-Up Applications

A novel topology of Integrated Boost-SEPIC (IBS) AC-DC converter using common part sharing method (CPSM) has been proposed in this paper. Conventional boost converters with bridge rectifier configuration are inefficient due to limited voltage step-up ratio which may not be applicable for high step-up applications as in the case of micro generators. The proposed IBS topology is based on the common part sharing method capable of operating both for positive and negative half cycle of the input signal. Result and simulation were conducted using PSIM environment. The proposed AC-DC IBS topology eliminates the requirement of bridge rectifier achieving high efficiency (about 99%), improved power factor (0.75, leading) and lower THD (about 38.8%) which is within IEEE standard.

高效单片AC/DC电源管理集成电路设计

随着科技快速发展,电子产品的复杂程度不断升级,日益向小型化、智能化、高效能方向迈进。电源管理系统作为电子产品中的重要系统之一,其重要作用逐渐凸显。本研究设计了一种单片AC/DC开关电源集成电路,该电路具有效率高、体积小、可靠性高等优点。因此,本文基于高效的单片AC/DC电源管理集成电路构成,对其进行了优化设计,希望能够为我国电源管理系统设计行业的相关工作提供参考和借鉴。

Study on Transformer Magnetic Biasing Control Method for AC Power Supplies

This paper presents a novel transformer magnetic biasing control method for high-power high-performance AC power supplies. Serious consequences due to magnetic biasing and several methods to overcome magnetic biasing are first discussed. The causes of the transformer magnetic biasing are then analyzed in detail. The proposed method is based on a high-pass filter inserted in the forward path and the feedforward control. Without testing magnetic biasing of transformer, this method can eliminate magnetic biasing of transformer completely in real-time waveform feedback control systems though the zero error of the Hall effect sensors varies with time and temperature. The method has already been employed in a 90KVA AC power supply. It is shown that it offers improved performance over existing ones. In this method, no sensors are used such that the zero error of the Hall effect sensors has not any influence on the system. It is simple to design and implement. Furthermore, the method is suitable for various power applications.

一种高效率半桥LLC型的AC/DC变换器设计

AC/DC开关电源是电力系统的主要动力来源,其发展趋势是:容量大、功率密度大、效率高、功率因数低、谐波含量低。但现有的数字电源仍存在着一些普遍问题:抗干扰能力差、结构功能简单、无法满足电厂和变电站等相关场所使用需求。设计了一种基于芯片控制的半桥开关电源,对其主电路进行了理论分析,并对EMI整流滤波电路、PFC功率因数校正电路、LLC半桥电路等电路进行了详细的设计。实验测试结果表明,该设计合理,具有大容量、高效率、高功率因数、低纹波等特点,能够充分满足目前的市场需求。

Research on power electronic transformer applied in AC/DC hybrid distribution networks

The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.

A new high-performance AC/DC power factor correction switching converter based on one-cycle control technology and active floating-charge technology

A new family of converters,high-performance AC/DC power factor correction(PFC) switching converters with one-cycle control technology and active floating-charge technology,was derived and experimentally verified.The topology of a single-phase CCM and DCM Boost-PFC switching converter was also analyzed.Its operating prniciples and control methods were expounded.Based on these,a new type of AC/DC switching converter circuits for PFC combined with one-cycle control technology was presented herein.The proposed AC/DC switching converter significantly helps improve the converter efficiency and its power factor value.

车载AC-DC变换器的模糊无差拍控制策略

针对车载充电机前级AC-DC变换器工作时,网侧电流存在严重畸变以及系统的动态响应性能不足的问题,提出了一种模糊控制和无差拍控制相结合的功率因数校正控制策略。在小信号建模的基础上,对传统PI平均电流控制进行分析,将其电压环改用模糊PI控制,以增强直流侧电压的动态响应性能;将电流环改用无差拍控制,以提高交流侧电流质量、减小谐波损耗。同时对无差拍控制进行了改进,通过预测第k+2时刻采样电流和第k+1时刻参考电流,改善了实际系统的时间延时和相位滞后问题。采用MATLAB/Simulink进行仿真,结果表明该控制策略有效地减小了网侧电流的总谐波失真,并提升了输出侧的动态响应指标。

Hybrid compensation method for traction power quality compensators in electrified railway power supply system

In order to improve the Power Quality(PQ)of traction power supply system and reduce the power rating and operation cost of compensator,a Static VAR Compensator(SVC)integrated Railway Power Conditioner(RPC)is presented in this paper.RPC is a widely used device in the AC electrified railway systems to enhance the PQ indices of the main network.The next generation of this equipment is Active Power Quality Compensator(APQC).The major concern of these compensators is their high kVA rating.In this paper,a hybrid technique is proposed to solve aforementioned problems.A combination of SVC as an auxiliary device is employed together with the main compensators,i.e.,RPC and APQC that leads on to the reduction of power rating of the main compensators.The use of proposed scheme will cause to reduce significantly the initial investment cost of compensation system.The main compensators are only utilized to balance active powers of two adjacent feeder sections and suppress harmonic currents.The SVCs are used to compensate reactive power and suppress the third and fifth harmonic currents.In this paper firstly,the PQ compensation procedure in AC electrified railway is analyzed step by step.Then,the control strategies for SVC and the main compensators are presented.Finally,a simulation is fulfilled using Matlab/Simulink software to verify the effectiveness and validity of the proposed scheme and compensation strategy and also demonstrate that this technique could compensate all PQ problems.