Model-free Speed Control of Single-phase Flux Switching Motor with an Asymmetrical Rotor

This paper proposes and implements a model-free open-loop iterative learning control(ILC)strategy to realize the speed control of the single-phase flux switching motor(FSM)with an asymmetrical rotor.Base on the proposed winding control method,the asymmetrical rotor enables the motor to generate continuous positive torque for positive rotation,and relatively small resistance torque for negative rotation.An initial iteration coefficient and variable iteration coefficient optimized scheme was proposed based on the characteristics of the hardware circuit,thereby forming the model-free strategy.A series of prototype experiments was carried out.Experimental results verify the effectiveness and practicability of the proposed ILC strategy.

Single-phase earth fault current distribution between optical fiber composite overhead ground wire and ordinary ground wire in transmission system

It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.

Tectonic modes of mantle convection and their implications for Earth's tectonic evolution based on three-dimensional numerical simulations

Five tectonic modes of mantle convection are obtained and analyzed with three-dimensional numerical models in a spherical shell domain.The five tectonic convective modes are non-plate mobile-lid,plate-like mobile-lid,episodic plate-like mobile-lid,episodic stagnant-lid,and stagnant-lid convective modes,respectively.The typical characteristics of these five tectonic modes and their numerical classification criteria based on plateness,mobility,and their standard deviations are presented and discussed.The results show that the yield stress of the lithosphere has profound effects on the tectonic convective modes.With the gradual increase of yield stress,the tectonic mode of mantle convection changes from one to another sequentially through the aforementioned five modes.Additionally,as the Rayleigh number increases,the range of yield stress for the platelike mobile-lid convective mode decreases,and the dimensionless transition stress between different tectonic modes increases.Specifically,the dimensional transition stress between the non-plate mobile-lid convective mode and plate-like mobile-lid convective mode increases with the increase of Rayleigh number,but decreases between other tectonic modes.Furthermore,we find that the transition stress between different tectonic modes is inversely proportional to the internal heating rate,with the transition stress decreasing as the internal heating rate increases.The fitting analysis of the transition stress between tectonic modes shows that Earth's current plate tectonics correspond to a lithospheric yield stress of 150–250 MPa,which aligns with the strength of serpentinized mantle rock determined by experimental petrography.If the Archean mantle was 300℃warmer than it is today,then the Earth was in an episodic stagnant-lid convective mode.The tectonic evolution of the Earth's surface is closely related to the lithospheric strength and the process of thermal evolution.If the lithospheric strength was only 150 MPa,plate tectonics in the early mantle rapid cooling model would have begun before 3.8 Ga,and plate tectonics in the late mantle rapid cooling model would have begun at approximately 1.5 Ga.However,at a lithospheric strength of 200 MPa,plate tectonics in the late mantle rapid cooling model would have begun later than 0.95 Ga,and plate tectonics in the early mantle rapid cooling model would have begun at approximately 2 Ga.The early Earth was in the episodic stagnant-lid convective mode,which means that subduction might still have occurred at that time.The presence of the episodic plate-like mobile-lid convective mode in Earth's later history indicates that there might also have been intermittent surface stagnation during plate tectonics,which may provide an explanation for the quiet period of tectonic activity at approximately 1.0 Ga on Earth.This indicates that tectonic inactivity during a geological period is not an indicator that plate tectonics did not begin.

基于Google Earth Engine的1985~2023年蒙古国地表水体的时空变化分析

水是人类社会发展生产的基础资源。随着遥感技术与云计算技术的不断发展,谷歌地球引擎(Google Earth Engine,GEE)平台成为了大规模和长期的地表水体分析与制图的重要手段。采用Landsat 5TM和Landsat 8OLI卫星数据,分析了1985~2023年6月至9月的蒙古国地表水体的时空变化特征。研究结果表明,1985~2023年蒙古国地表水体的面积呈下降趋势,稳定水体面积从15547.71km2缩减至14452.13km^(2)。其中,大型水体保持相对稳定,主要是小型湖泊和河流发生变化。本文的分析结果为深入了解蒙古国的生态环境变化提供了重要的基础,并为准确预测蒙古国未来的水资源和环境变化以及水资源的有效管理和保护提供了方向。

Microstructure,mechanical property and in vitro biocorrosion behavior of single-phase biodegradable Mg-1.5Zn-0.6Zr alloy

The microstructure,mechanical property,and in vitro biocorrosion behavior of as-cast single-phase biodegradable Mg-1.5Zn-0.6Zr alloy were investigated and compared with a commercial as-cast AZ91D alloy.The results show that the Mg-1.5Zn-0.6Zr alloy had a single-phase solid solution structure,with an average grain size of 34.7±13.1μm.The alloy exhibited ultimate tensile strength of 168±2.0 MPa,yield strength of 83±0.6 MPa,and elongation of 9.1±0.6%.Immersion tests and electrochemical measurements reveal that the alloy displayed lower biocorrosion rate and more uniform corrosion mode than AZ91D in Hank's solution.The elimination of intensive galvanic corrosion reactions and the formation of a much more compact and uniform corrosion film mainly account for the better biocorrosion properties of the Mg-1.5Zn-0.6Zr alloy than AZ91D.

Preparation of single-phase ammonium dimolybdate by combination process

A novel method for the preparation of single-phase ammonium dimolybdate with industrial ammonium molybdate was studied. Various in- fluential factors were evaluated in the paper, including reaction temperature, reaction time, initial molybdenum concentration, initial NH_3 /Mo molar ratio, and stirring speed. Under the optimum experimental conditions, the crystallization rate of product is 85.23%. The X-ray diffraction (XRD) analysis and chemical analysis show that the product is single-phase ammonium dimolybdate, and no impurity phases exist. The scanning electronic microscope (SEM) image reveals uniform particle size, good particle dispersion, and no agglomeration between particles. Meanwhile, the final pH value of acidification was investigated. The total molybdenum recovery can reach up to 99.40%, and the main phases of acidification product are the same as those of raw material with the final pH value of 1.5. This determines that the acidification product can be used as a raw material to produce single-phase ammonium dimolybdate.

Dynamic behavior of coalbed methane flow along the annulus of single-phase production

Dynamic behavior of coalbed methane (CBM) flow will provide the theoretical basis to optimize production performance for a given well.A mathematical model is developed to simulate flowing pressures and pressure drops of CBM column from well head to bottom hole.The measured parameters and independent variables of flow rates,flowing pressures and temperatures are involved in CBM producing process along the annulus.The developed relationships are validated against full-scale measured data in single-phase CBM wellbores.The proposed methodology can analyze the dynamic behavior in CBM reservoir and process of CBM flow with an overall accuracy of 2%.The calculating process of flowing pressures involves friction factor with variable Reynolds number and CBM temperature and compressibility factor with gravitational gradients.The results showed that the effect of flowing pressure on CBM column was more obvious than that on CBM and water column accompanied by an increase of dynamic water level.The ratios of flowing pressure on increment of CBM column to the whole column increased with the declined flow rates of water column.Bottom-hole pressure declined with the decreased flowing pressure of CBM column along the annulus.It will lead to the results of the increased pressure drop of CBM column and CBM flow rate in single-phase CBM wellbores.

Symmetrical dynamical characteristic of peak and valley current-mode controlled single-phase H-bridge inverter

Complex dynamical phenomenon was studied in the single phase H-bridge inverter which was controlled by either a peak current or a valley current. The state functions and the discrete iterative map equations were established to analyze the dynamical phenomenon in the single phase H-bridge inverter. The dynamical characteristics of the single phase H- bridge inverter, such as time domain waveform diagram, bifurcation diagram, and folding map, were obtained by using the numerical calculation when the circuit parameters varied in specific range. Moreover, the simulation results were obtained by using the OrCAD-PSpice software to validate the numerical calculation. Both the numerical calculation and the circuit simulation show that the symmetrical dynamical phenomenon occurs in the single phase H-bridge inverter controlled by the peak current or the valley current.

The Use of Single-Phase Immersion Cooling by Using Two Types of Dielectric Fluid for Data Center Energy Savings

Data centers are recognized as one of the most important aspects of the fourth industrial revolution since conventional data centers are inefficient and have dependency on high energy consumption,in which the cooling is responsible for 40%of the usage.Therefore,this research proposes the immersion cooling method to solving the high energy consumption of data centers by cooling its component using two types of dielectric fluids.Four stages of experimentalmethods are used,such as fluid types,cooling effectiveness,optimization,and durability.Furthermore,benchmark software is used to measure the CPU maximum work with the temperature data performed for 24 h.The results of this study show that the immersion cooling reduces 13℃ lower temperature than the conventional cooling method which means it saves more energy consumption in the data center.The most optimum variable used to decrease the temperature is 1.5 lpm of flow rate and 800 rpm of fan rotation.Furthermore,the cooling performance of the dielectric fluids shows that the mineral oil(MO)is better than the virgin coconut oil(VCO).In durability experiment,there are no components damage after five months immersed in the fluid.

Prediction of Outdoor Noise Propagation Induced By Single-Phase Power Transformers

Outdoor power transformers are one of the most pervasive noise sources in power transmission and distribution systems.Accurate prediction of outdoor noise propagation plays a dominant role for the evaluation and control of noise relevant to the transformer stations.In this paper surface vibration tests are carried out on a scale model of a single-phase transformer tank wall at different excitation frequencies.The phase and amplitude of test data are found to be randomly distributed when the excitation frequency exceeds the seventh mode frequency,which allows the single-phase power transformer to be simplified as incoherent point sources.An outdoor-coherent model is subsequently developed and incorporated with the image source method to investigate noise propagation from single-phase power transformers,due to the occurrence of multiple reflections and diffractions in the propagation path of each point source.The proposed model is used to calculate the sound field of the power transformer group by exploiting the additional phase information.In comparison with the ISO9613 model and the boundary element method,it is found that the proposed coherent image source method leads to more accurate prediction results,and hence better performance for the prediction of the outdoor noise induced by single-phase power transformers.

A 6-switch single-phase 5-level current-source inverter

The new 6-switch single-phase 5-level current-source inverter proposed in this paper was developed by properly simplifying the traditional 8-switch single-phase 5-level current-source inverter, and its operational principle was analyzed. Just like the problem of voltage-unbalance between different levels existing in voltage-source multilevel inverters, a similar problem of current-unbalance between different levels whether for the 8-switch single-phase 5-level current-source inverter, or for the new 6-switch 5-level current-source inverter also exists. A simple current-balance control method via DC current feedback is presented here to implement the current-balance control between different levels. And to reduce the output current harmonics, PWM control technique was used. Simulation and experimental results showed that this new 6-switch topology operates correctly and that the balance-inductor can almost equally distribute the total DC current.

基于Google earth engine渭-库绿洲果园遥感提取

针对干旱区果园大面积遥感提取困难、识别精度低等问题,本研究基于GEE(Google earth engine)平台,综合应用Sentinel-1/Sentinel-2影像构建特征集。通过对比原始特征组合、Jeffries-Matusita(J-M)距离、属性重要度3种优化方式,结合随机森林(Random forest,RF)分类方法,对比得到最佳优化方式,探索果园最优分类特征集。结果表明:识别效果最好的方案为G17 JM,总体精度为91.25%,kappa系数为0.89,面积精度为82.55%。最优特征集为B8_asm、B8_ent、B8_idm、NDVI re3、B6、B7、a、e、b、EVI、B11、B8A、B8、VV。使用J-M距离进行特征集优化,有效降低数据量、提高计算效率,更有利于精确遥感识别果园种植面积。表明GEE快速、准确获取果园种植面积的可行性,为获取果园动态变化提供强有力的基础。

Real-Time Method for Detecting Harmonic and Reactive Currents of Single-Phase Circuits

According to the characteristics of single-phase circuits and demand of using active filter for real-time detecting harmonic and reactive currents, a detecting method based on Fryze＇s power definition is proposed. The results of theoretical analysis and simula- tion show that the proposed method is effective in realtime detecting of instantaneous harmonic and reactive currents in single-phase circuits. When only detecting the total reactive currents, this method does not need a phase-locked loop circuit, and it also can be used in some special applications to provide different compensations on the ground of different requirements of electric network. Compared with the other methods based on the theory of instantaneous reactive power, this method is simple and easy to realize.

Modified surface tension model for free surface flow with single-phase lattice Boltzmann method

A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor （which needs to be smaller than 1） is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper （Comp.Mater.Sci.,2007,39（2）：282-290）.The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.＇s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.

Design and Testing of Three Earthing Systems for Micro-Grid Protection during the Islanding Mode

This paper presents and tests three earthing systems (TT, TN and IT) for Micro-Grid (MG) protection against various fault types when the MG transferred to the islanding mode. The main contribution of this work is including the models of all micro sources which interfaced to the MG by power electronic inverters. Inverters in turns are provided with current limiters and this also included with the inverter models to exactly simulate the real situation in the MG during fault times. Results proved that the most suitable earthing system for MG protection during the islanding mode is the TN earthing system. That system leads to a suitable amount of fault current sufficient to activate over current pro-tection relays. With using TN earthing system, touch voltages at the faulted bus and all other consumer’s buses are less than the safety limited values during islanding mode. For the two others earthing systems (TT and IT), fault currents are small and nearly equal to the over load currents which make over current protection relay can not differentiate between fault currents and overload currents. All models of micro sources, earthing systems, inverters and control schemes are built using Matlab?/Simulink? environment.

基于GEOVIS Earth Studio的高中地理教学案例开发——以“河流地貌”为例

信息技术与教学的融合发展是教育改革发展的方向,地理信息技术在教育信息化2.0时代给地理教育提供了丰富的教学资源,可有效提高教学效果。本文通过挖掘GEOVIS Earth Studio平台在地理教学中的功能优势,构建其教学应用模式,以人教版必修《地理1》“河流地貌”为例阐明平台操作过程并进行案例教学设计,创新地理教学技术手段,促进中学地理教学的信息化进程。

Comparison the Performances of Three Earthing Systems for Micro-Grid Protection during the Grid Connected Mode

This paper presents, tests and compares three earthing systems (TT, TN and IT) for Micro-Grid (MG) protection against various fault types during the connected mode. The main contribution of this work is including the models of all the micro sources which interfaced to the MG by power electronic inverters. Inverters in turns are provided with current limiters and this also included in the inverter models to exactly simulate the real situation in the MG during fault times. Results proved that the most suitable earthing system for MG protection during the connecting mode is the TN earthing system. That system leads to a suitable amount of fault current sufficient to activate over current protection relays. With using TN system, Touch voltages at the faulted bus and all other consumer’s buses are less than the safety limited value if current limiter is included with the transformer of the main grid which connects MG. For the two others earthing systems (TT and IT), fault current is small and nearly equal to the over load current which make over current protection relay can not differentiate between fault current and overload current. All models of micro sources, earthing systems, inverters, main grid and control schemes are built using Matlab?/Simulink? environment.

Industrial frequency single-phase AC traction power supply system for urban rail transit and its key technologies

To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.

Tunable Emission and Energy Transfer of the Novel KY_(1-x)(MoO_(4))_(2-y)(WO_(4))y:xLn^(3+)(Ln^(3+)=Dy^(3+),Eu^(3+),and Tm^(3+))Single-phase White Luminescence Phosphor for White LEDs

The phosphors of KY_(1-x)(MoO_(4))_(2-y)(WO_(4))y:xLn^(3+)(Ln^(3+)=Tm^(3+),Dy^(3+),Eu^(3+))were synthesized by using a sol-gel method.Then,the crystal structure,luminescence properties,energy transfer,and white emission of the prepared materials were researched.The molar ratio of the anion group on the photoluminescence(PL)emission and excitation intensity were investigated,revealing that the optimum intensity could be obtained by using=3:1.The optimal Dy^(3+) doping concentration of KY(MoO_(4))1.5(WO4)0.5was obtained.In addition,the color-tunable emissions of Dy^(3+)/Eu^(3+)-codoped KY(MoO_(4))1.5(WO4)0.5phosphors were observed because of the effective energy transfer(ET)from Dy^(3+)to Eu^(3+)ions.Finally,by doping appropriate concentrations of Tm^(3+),Dy^(3+),and Eu^(3+)and different concentrations of(WO_(4))^(2-),white light emitting phosphors KY_(0.92)(WO_(4))2:0.01Tm^(3+),0.06Dy^(3+),0.01Eu^(3+)with excellent color-rending properties were obtained.The chromaticity coordinate was calculated as(x=0.3238,y=0.3173),closing to the artificial daylight(D65,x=0.313,y=0.329)illuminant,and which indicates the potential application of near ultraviolet White light-emitting diodes(WLEDs).

基于Google Earth Engine遥感大数据云平台的盐城盐沼植被精细分类研究

江苏省自1982年开始引种互花米草以来,滨海盐沼植被景观格局发生了巨大变化,芦苇和互花米草面积不断增长,挤占了碱蓬生态位,破坏了生态系统平衡。滨海盐沼湿地是三大蓝碳生态系统之一,具有高固碳和缓解温室效应的生态功能。利用遥感云平台手段监测滨海盐沼植被时空动态变化规律,可为滨海盐沼湿地生态系统保护以及修复提供科学支撑。本文选取植被类型丰富的江苏沿海地区为研究区,基于Google Earth Engine(GEE)平台,选取2000-2020年的Landsat 5、Landsat 7、Landsat 8以及Sentinel-2影像,提出了一种湿地植被提取方法。首先,构建盐城盐沼湿地地表覆盖分类体系,选取样本点,计算特征指数,进行地物分类;然后,利用时间谐波分析法对盐沼植被归一化植被指数(NDVI)变化特征进行分析,确定三类盐沼植被的物候差异;最后,基于物候特征,利用随机森林(Random Forest,RF)分类法提取盐城滨海湿地盐沼植被地表覆盖信息。结果表明:(1)相较传统监测方法,本文所构建的滨海盐沼植被精细化提取方法能够对滨海盐沼植被进行有效细分和监测;(2)2000-2020年,芦苇和互花米草面积呈扩张趋势,碱蓬面积不断缩减;(3)盐城三种典型盐沼植被NDVI值呈现不同变化特征;(4)降水对盐沼植被生长的影响较为显著,气温对盐沼植被生长的直接影响较小。研究结果可为盐城盐沼湿地自然遗产保护以及湿地生态可持续发展提供科学支撑。