Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Shape design of the reinforcement for bending load-carrying capacity of under-matched butt joint under four-point bending load

To improve the bending load-carrying capacity （ BLCC） of under-matched butt joint under four-point bending load in the elastic stage, the shape design of the reinforcement is studied based on the theoretics of mechanics of materials. The concept, criterion, realization condition and design proposal of equal bending load-carrying capacity （EBLCC） are put forward. The theoretical analysis results have been verified by the finite element method. The simulation results are coincident basically with the ones of theoretical analysis. The research results show that the shape design of the reinforcement of EBLCC can improve BLCC of under-matched butt joint and the unilateral-side type reinforcement can replace double-side symmetry

Using a GIS to Assessment the Load-Carrying Capacity of Soil Case of Berhoum Area, Hodna Basin, (Eastern Algeria)

The concept of load-carrying capacity of the soil can be evaluated by two main components: permissible stress and permissible depth;and therefore, running it begins its assessment that allows an outline of exploitation. Nevertheless, the assessment of the load-carrying capacity made the object of several works of research and many models, based on the multi-criteria analysis, have been established. This work examines the contribution of GIS approach to assessment load-carrying capacity of the soil. This one has been finished in two practicums: 1) Assessment of the capacity of soil by a multi-criteria approach, using the Weighted Sum Model (WSM);2) It brought to use the GIS approach to evaluate and spatialize degree of soil bearing stresses resulting from the buildings, as well as load distribution. The method has been applied to the Berhoum area of Hodna Basin, in eastern Algeria, where each is characterized by its various natural properties and density of equipment. Final results are better in the classification of the degree of load-carrying capacity possible in each site. This results in allowing exploiters to program their optimal designs for the rational management of the area.

Boundary slippage for generating hydrodynamic load-carrying capacity

Boundary slippage is used to generate the load-carrying capacity of the hydrodynamic contact between two parallel plane surfaces. In the fluid inlet zone, the fluidcontact interfacial shear strength on a stationary surface is set at low to generate boundary slippage there, while in the fluid outlet zone the fluid-contact interfacial shear strength on the stationary surface is set at high enough to prevent the occurrence of boundary slippage. The fluid-contact interfacial shear strength on the entire moving surface is set at high enough to prevent boundary slippage on the moving surface. These hydrodynamic contact configurations are analyzed to generate the pronounced load-carrying capacity. The optimum ratio of the outlet zone width to the inlet zone width for the maximum load-carrying capacity of the whole contact is found to be 0.5.

A Discusion on Limited Load-Carrying Capacity of Rectangular Plates

The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the improvement of the load-carrying capacity or the reduction of the weight of plates, the yield line analytical method is employed in this paper to design the bulkhead plate to improve economy and increase the effiective load. Besides, a further sutdy of this method has been made theoretically and experimentally, and the data of the limited load-carrying capacity of the plate have been obtained. Furthermore, the safety coefficients for such a method are presented, which can be used as reference for related departments and staffs.

A novel efficient energy absorber with free inversion of a metal foam-filled circular tube

In this paper, a novel efficient energy absorber with free inversion of a metal foam-filled circular tube(MFFCT) is designed, and the axial compressive behavior of the MFFCT under free inversion is studied analytically and numerically. The theoretical analysis reveals that the energy is mainly dissipated through the radial bending of the metal circular tube, the circumferential expansion of the metal circular tube, and the metal filled-foam compression. The principle of energy conservation is used to derive the theoretical formula for the minimum compressive force of the MFFCT over free inversion under axial loading. Furthermore, the free inversion deformation characteristics of the MFFCT are analyzed numerically. The theoretical steady values are found to be in good agreement with the results of the finite element(FE) analysis. The effects of the average diameter of the metal tube, the wall thickness of the metal tube, and the filled-foam strength on the free inversion deformation of the MFFCT are considered. It is observed that in the steady deformation stage, the load-carrying and energy-absorbing capacities of the MFFCT increase with the increase in the average diameter of the metal tube, the wall thickness of the metal tube, or the filled-foam strength. The specific energy absorption(SEA) of free inversion of the MFFCT is significantly higher than that of the metal tube alone.

Impact of the thermal effect on the load-carrying capacity of a slipper pair for an aviation axial-piston pump

A thermal hydraulic model based on the lumped parameter method is presented to analyze the load-carrying capacity of a slipper pair in an aviation axial-piston pump under specified operating conditions. Both theoretical and experimental results are presented to demonstrate the validity of the thermal hydraulic model. The results illustrate that the squeezing force and thermal wedge bearing force are the main factors that affect the film thickness and load-carrying capacity.At high oil temperature and high load pressure, the film thickness decreases with increasing clamping force due to a combined action of the squeezing bearing force and the thermal wedge bearing force, but the load-carrying capacity will increase. An increase of the film thickness is proven to be beneficial under high shaft rotational speed but especially dangerous as it strongly increases the ripple amplitude of the film thickness, which leads to decreasing the load-carrying capacity. The structural parameters of the slipper can be optimized to achieve desired performance, such as the slipper radius ratio and orifice length diameter ratio. To satisfy the requirement of the load-carrying capacity, the slipper radius ratio should be selected from 1.4 to 1.8, and the orifice length diameter ratio should be selected from 4 to 5.

Experimental Study on the Reduction Effect of Pit Texture on Disassembly Damage for Interference Fit

After remanufacturing disassembly,several kinds of friction damages can be found on the mating surface of interference fit.These damages should be repaired and the cost is closely related to the severity of damages.Inspired by the excellent performance of surface texture in wear reduction,5 shapes of pit array textures are added to the specimens’surface to study their reduction effect of disassembly damage for interference fit.The results of disassembly experiments show that the order of influence of texture parameters on disassembly damage is as follows:equivalent circle diameter of single texture,texture shape and texture surface density.The influence of equivalent circle diameter of single texture and texture shape are obviously more significant than that of texture surface density.The circular texture with a surface density of 30%and a diameter of 100μm shows an excellent disassembly damage reduction effect because of its perfect ability of abrasive particle collection.And the probability of disassembly damage formation and evolution is also relatively small on this kind of textured surface.Besides,the load-carrying capacity of interference fit with the excellent texture is confirmed by load-carrying capacity experiments.The results show that the load-carrying capacity of the excellent texture surface is increased about 40%compared with that of without texture.This research provides a potential approach to reduce disassembly damage for interference fit.

Load-carrying capacity and practical calculation method for hollow cylinder joints connected with H-shaped beams

A type of hollow cylinder joints connected with H-shaped beams is proposed for spatial structures. Based on von Mises yield criterion and perfect elasto-plasticity model, a series of finite element models of the joints is established, in which the effect of geometric nonlinearity is taken into account. Then mechanical behavior and load-carrying capacity of the joints were investigated, which were subjected to axial load, in- and out-plane bending moments, and their combinations. The results show that the ultimate loads of the joints are determined by the maximum displacement. Furthermore, the case of one joint connected with multiple beams was discussed. Experiments on a set of typical full-scale joints were conducted to understand the structural behavior and the failure mechanism of joint, and also to validate the finite element models. Finally, the practical calculation method was established through finite elements analysis (FEA) results and numerical fitting. The results show that the joints are more ductile and materially economical than welded hollow spherical joints, and the practical calculation method can provide a reference for direct design and the revision of relevant design codes.

Prediction of the load-carrying capacity of reinforced concrete connections under post-earthquake fire

Finding out the most effective parameters relating to the resistance of reinforced concrete connections(RCCs)is an important topic in structural engineering.In this study,first,a finite element(FE)model is developed for simulating the performance of RCCs under post-earthquake fire(PEF).Then surrogate models,including multiple linear regression(MLR),multiple natural logarithm(Ln)equation regression(MLn ER),gene expression programming(GEP),and an ensemble model,are used to predict the remaining load-carrying capacity of an RCC under PEF.The statistical parameters,error terms,and a novel statistical table are used to evaluate and compare the accuracy of each surrogate model.According to the results,the ratio of the longitudinal reinforcement bars of the column(RLC)has a significant effect on the resistance of an RCC under PEF.Increasing the value of this parameter from 1%to 8%can increase the residual load-carrying capacity of an RCC under PEF by 492.2%when the RCC is exposed to fire at a temperature of 1000°C.Moreover,based on the results,the ensemble model can predict the residual load-carrying capacity with suitable accuracy.A safety factor of 1.55 should be applied to the results obtained from the ensemble model.

EFFECTS OF MANUFACTURING ERRORS ON GAS LUBRICATED JOURNAL BEARING WITH COMPLIANT SURFACE

A theoretical study has been performed to investigate the influence of manufacturing errors on the bearing housing of a gas lubricated journal bearing with compliant surface I in particular on the bearing load capacity. A gas film thickness distribution is presented, in which errors o f both circumferential and axial bearing housing are considered. The influence of the errors on bearing performance is compared between rigid and compliant surface bearings. It was shown that the compliant surface bearings are less sensitive to the manufacturing errors than the rigid surface bearings. Thelefore, the cost of compliant surface bearing could be reduced by setting a larger manufacturing error tolerance.

Experimental Evaluation of the Post-ultimate Strength Behavior of a Ship＇s Hull Girder in Waves

Experimental investigations into the collapse behavior of a box-shape hull girder subjected to extreme wave-induced loads are presented.The experiment was performed using a scaled model in a tank.In the middle of the scaled model,sacrificial specimens with circular pillar and trough shapes which respectively show different bending moment-displacement characteristics were mounted to compare the dynamic collapse characteristics of the hull girder in waves.The specimens were designed by using finite element(FE)-analysis.Prior to the tank tests,static four-point-bending tests were conducted to detect the load-carrying capacity of the hull girder.It was shown that the load-carrying capacity of a ship including reduction of the capacity after the ultimate strength can be reproduced experimentally by employing the trough type specimens.Tank tests using these specimens were performed under a focused wave in which the hull girder collapses under once and repetitive focused waves.It was shown from the multiple collapse tests that the increase rate of collapse becomes higher once the load-carrying capacity enters the reduction path while the increase rate is lower before reaching the ultimate strength.

Numerical Analysis on Nanoparticles-laden Gas Film Thrust Bearing

Nanoparticles can be taken as additives and added into various fluids to improve their lubricating performances. At present, researches in this area are mainly concentrated on the improvement effects of nanoparticles on the lubricating performances of liquid such as oil and water. Nanoparticles will also affect gas lubrication, but few related studies have been reported. Nanoparticles-laden gas film (NLGF) is formed when adding nanoparticles into gas bearing. Then, the lubricating performances of gas bearing including pressure distribution and load-carrying capacity will change. The variations of pressure distribution and load-carrying capacity in nanoparticles-laden gas film thrust bearing are investigated by numerical method. Taking account of the compressibility of gas and the interactions between gas and nanoparticles, a computational fluid dynamics model based on Navier-Stokes equations is applied to simulate the NLGF flow. The effects of inlet nanoparticles volume fraction and orifice radius on film pressure distribution and load-carrying capacity of the NLGF are calculated. The numerical calculation results show that both of the film land pressure and the maximum film pressure both increase when the nanoparticles are added into gas bearing, and the film pressures increase with the rising of the inlet nanoparticles volume fraction. The nanoparticles have an enhancement effect on load-carrying capacity of the studied bearing, and the enhancement effect becomes greater as the film thickness decrease. Therefore, nanoparticles can effectively improve the lubricating performance of gas bearing. The proposed research provides a theoretical basis for the design of new-type nanoparticles-laden gas film bearings.

Flexural behavior of steel reinforced engineered cementitious composite beams

In order to enhance the durability of steel encased concrete beams, a new type of steel reinforced engineered cementitious composite(SRECC) beam composed of steel shapes, steel bars and ECC is proposed. The theoretical analyses of the SRECC beam including crack propagation and stress-strain distributions along the depth of the composite beam in different loading stages are conducted. A theoretical model and simplified design method are proposed to calculate the load carrying capacity. Based on the proposed theoretical model, the relationship between the moment and corresponding curvature is derived. The theoretical results are verified with the finite element analysis. Finally, an extensive parametric study is performed to study the effect of the matrix type, steel shape ratio, reinforced bar ratio, ECC compressive strength and ECC tensile ductility on the mechanical behavior of SRECC beams. The results show that substitution concrete with ECC can effectively improve the bearing capacity and ductility of composite beams. The steel shape and longitudinal reinforcement can enhance the loading carrying capacity, while the ductility decreases with the increase of steel shape ratio. ECC compressive strength has significant effects on both load carrying capacity and ductility, and changing the ultimate strain of ECC results in a very limited variation in the mechanical behavior of SRECC beams.

Mechanical Behavior of Rectangular Steel-Reinforced ECC/Concrete Composite Column under Eccentric Compression

In order to improve the seismic performance, deformation ability and ultimate load-carrying capacity of columns with rectangular cross section, engineered cementitious composite （ECC） is introduced to partially substitute concrete in the edge zone of reinforced concrete columns and form reinforced ECC/concrete composite columns. Firstly, based on the assumption of plane remaining plane and the simplified constitutive models, the calculation method of the load-carrying capacity of reinforced ECC/concrete columns is proposed. The stress and strain distribu- tions and crack propagation of the composite columns in different states of eccentric compressive loading are ana- lyzed. Then, nonlinear finite element analysis is conducted to study the mechanical performance of reinforced ECC/concrete composite columns with rectangular cross section. It is found that the simulation results are in good agreement with the theoretical results, indicating that the proposed method for calculating the load-carrying capacity of concrete/ECC composite columns is valid. Finally, based on the proposed method, the effects of ECC thickness, com- pressive strength of concrete and longitudinal reinforcement ratio on the mechanical performance of reinforced ECC/ concrete composite columns are analyzed. Calculation results indicate that increasing the thickness of ECC layer or longitudinal reinforcement ratio can effectively increase the ultimate load-carrying capacity of the composite column with both small and large eccentricity, but increasing the strength of concrete can only increase the ultimate Ioad- carrying capacity of the composite column with small eccentricity.

Mechanical Properties of Moso Bamboo Connections with External Clamp Steel Plates

The Moso bamboo,a renewable green building material used in various new green buildings,have received exten-sive attention with the promotion of the concept of green buildings.To explore the mechanical properties of Moso bamboo connections with external clamp steel plates,the 16 specimens were designed by changing the bolt diameters and the end distances of the bolt holes.Their static tension tests were conducted to investigate bearing capacities and failure modes of different connection configurations.Based on test results,three failure modes of these connections were obtained,including the shear failure of bolt shank,bearing failure of bolt hole and punch-ing shear failure of the Moso bamboo.The influence of bolt diameters and end distances of bolt holes on bearing capacities of the connections was quantitatively analyzed.Based on a simplified mechanical model,the analytical models were deduced for the bolt shear failure and the bearing failure of bolt holes.The results showed that the predictive values are in substantial agreement with the experimental results.Finally,the design and manufacturing suggestions are recommended for this Moso bamboo connections.

Comparative Studies of Steel, Bamboo and Rattan as Reinforcing Bars in Concrete: Tensile and Flexural Characteristics

This study comparatively evaluated the flexural performance and deformation characteristics of concrete elements reinforced with bamboo (Bambusa vulgaris), rattan (Calamuc deerratus) and the twisted steel rebars. The yield strength (YS), ultimate tensile strength (UTS) and the elongation of 50 specimens of the three materials were determined using a universal testing machine. Three beams of concrete strength 20 N/mm2 at age 28 days were separately reinforced with bamboo, rattan and steel bars of same percentage, while the stirrups were essentially mild steel bars. The beams were subjected to centre-point flexural loading according to BS 1881 to evaluate the flexural behaviour. The YS of bamboo and rattan bars were 13% and 45% of that of steel respectively, while their UTS were 16% and 62% of that of steel in the same order. The elongation of bamboo, rattan and steel were 7.42%, 10% and 14.7% respectively. The natural rebars were less than the 12% minimum requirement of BS 4449. The load-deflection plots of bamboo and steel RC beams were quadratic, while rattan RC beams had curvilinear trend. The stiffness of bamboo RC beams (BB) and rattan RC beams (RB) were 32% and 13.5% of the stiffness of steel RC beams (SB). The post-first crack residual flexural strength was 41% for BB and SB, while RB was 25%. Moreover, the moment capacities of BB and RB corresponded to 51% and 21% respectively of the capacity of steel RC beams. The remarkable gap between the flexural capacities of the natural rebars and that of steel can be traced not only to the tensile strength but also the weak bonding at the bar-concrete interface. It can be concluded that the bamboo bars are suitable rebars for non-load bearing and lightweight RC flexural structures, while more pre-strengthening treatment is required more importantly for rattan for improved interfacial bonding and load-carrying capacity.

Behavior of RC two-way slabs strengthened with CFRP-steel grid under concentrated loading

A novel composite technique of orthogonally bonding carbon fiber-reinforced polymer （CFRP） strips and steel strips is proposed to improve the performance of reinforced concrete （RC） structures based on co-working of CFRP strips and steel strips. To verify the effectiveness of the method for strengthening RC two-way slabs, seven flat slabs with the dimensions of i 500 mm x 1 500 mm x 70 mm and an internal reinforcement ratio of 0.22% were prepared and tested until failure under concentrated loading, of which one was unstrengthened, one was strengthened with CFRP strips bonded to its soffit making a grid pattern （termed the CFRP grid）, and five were strengthened with a hybrid grid of CFRP strips and steel strips in two orthogonal directions （termed the CFRP-steel grid） to the bottom with steel bolt anchorage. The investigation parameters are the strengthening method, the strip spacing （150, 200, and 250 mm） and the layers of CFRP strips （one layer, two layers, and three layers of CFRP strips are applied for CFRP-steel grid）. The experimental results show that the strengthening RC two-way slabs with CFRP-steel grid are effective in delaying concrete cracking and enhancing the load-carrying capacity and deformability in comparison to the CFRP grid strengthening. The yield-line analysis model is proposed to predict the load-carrying capacity of the strengthened slabs. The prediction results are in good agreement with the experimental results.

Simplified Algorithm for Out-of-Plane Critical Loads of CFST Solid-Rib Arch

The simplified algorithm for out-of-plane ultimate loadcarrying capacity of concrete-filled steel tubular( CFST) solid-rib arches under uniform vertical load was studied. The experimentally validated finite element model was developed. The out-of-plane equivalent length coefficients of solid-rib arches were obtained using out-of-plane elastic eigenvalue buckling analysis. Then the out-ofplane elastic stability coefficient was plotted against the normalized slenderness ratio,and the out-of-plane eigenvalue buckling load or elastic buckling capability of arches was calculated. Lastly effects of different parameters on the out-of-plane ultimate load-carrying capacity of CFST solid-rib arches were determined using geometric and material nonlinear finite element analysis, and a simplified algorithm was established by fitting the out-of-plane elastic-plastic stability coefficient and normalized slenderness ratio using PerryRobertson formula. Ratio of the elastic stability coefficient to the elastic-plastic counterpart was plotted against the out-of-plane normalized slenderness ratio,from which the out-of-plane elasticplastic ultimate load-carrying capacity was determined according to the corresponding elastic buckling load. Results show that the proposed simplified algorithm can accurately predict the out-of-plane eigenvalue buckling load and the elastic-plastic ultimate loadcarrying capacity of the CFST solid-rib arches.

Steady Characteristics of the Water-Lubricated Conical Bearings

The water-lubricated conical bearing has attracted attentions of researchers for its simple structure, easily adjusted gap （fdm thickness ）, lower friction loss, and less pollution in application. A mathematic model with consideration of the effects of turbulence, two-phase flow, and temperature on the pressure field at bearing surface is proposed here. Using this model, the Reynolds＇ equation and energy equation are solved in which the thermo- physical properties of the water as lubricant are taken into account. The dependency of characteristics of bearing, such as load-earrying capacity, flow rate （pumping losses ）, and frictional losses, on angular velocity, conical angle, and radial eccentricities, is presented. The research results are beneficial to the improvement of the efficiency of conical bearing and the environmental protection.