This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for re...This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for realistic advanced simulation of a short-range 60 GHz wireless link. Millimeter-wave frequency conversion is performed using a six-port down-converter. The second frequency conversion is performed using conventional means because of low IF. A comparison between the proposed receiver and a conventional balanced millimeter-wave mixer shows that the proposed receiver improves conversion loss and I/Q phase stability over the local oscillator （LO） and RF power ranges. The results of demodulating a V-band quadrature phase-shift keying （QPSK） signal at a high data rate of 100 Mb/s-1 Gb/s are discussed. The results of a bit error rate （BER） and error vector magnitude （EVM） analysis prove that the proposed architecture can be successfully used for wireless link transmission up to 10 m.展开更多
A dual-tone technique is used to produce multi-samples in optimising calibration of six-port junction. More accurate results are achieved by using the least-square method and excluding those samples which may cause bi...A dual-tone technique is used to produce multi-samples in optimising calibration of six-port junction. More accurate results are achieved by using the least-square method and excluding those samples which may cause bigger errors. A 0.80 -1.10 GHz microwave integrated circuit （MIC） six-port reflectometer is constructed. Nine test samples are used in the measurement. With Engen＇s calibration procedure, the difference between the HP8510 and the six-port reflectrometer is in the order of 0.20 dB/1.5° for most cases, above 0.50 dB/5.0° at boundary frequency. With the optimised method, the difference is less than 0. 10 dB/1.0° for most cases, and the biggest error is 0.42 dB/2.1° for boundary frequencies.展开更多
This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To...This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.展开更多
文摘This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for realistic advanced simulation of a short-range 60 GHz wireless link. Millimeter-wave frequency conversion is performed using a six-port down-converter. The second frequency conversion is performed using conventional means because of low IF. A comparison between the proposed receiver and a conventional balanced millimeter-wave mixer shows that the proposed receiver improves conversion loss and I/Q phase stability over the local oscillator （LO） and RF power ranges. The results of demodulating a V-band quadrature phase-shift keying （QPSK） signal at a high data rate of 100 Mb/s-1 Gb/s are discussed. The results of a bit error rate （BER） and error vector magnitude （EVM） analysis prove that the proposed architecture can be successfully used for wireless link transmission up to 10 m.
基金The National Natural Science Foundation of China (No.60441006)
文摘A dual-tone technique is used to produce multi-samples in optimising calibration of six-port junction. More accurate results are achieved by using the least-square method and excluding those samples which may cause bigger errors. A 0.80 -1.10 GHz microwave integrated circuit （MIC） six-port reflectometer is constructed. Nine test samples are used in the measurement. With Engen＇s calibration procedure, the difference between the HP8510 and the six-port reflectrometer is in the order of 0.20 dB/1.5° for most cases, above 0.50 dB/5.0° at boundary frequency. With the optimised method, the difference is less than 0. 10 dB/1.0° for most cases, and the biggest error is 0.42 dB/2.1° for boundary frequencies.
文摘This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.
