Extended wet sieving method for determination of complete particle size distribution of general soils

The traditional standard wet sieving method uses steel sieves with aperture?0.063 mm and can only determine the particle size distribution(PSD)of gravel and sand in general soil.This paper extends the traditional method and presents an extended wet sieving method.The extended method uses both the steel sieves and the nylon filter cloth sieves.The apertures of the cloth sieves are smaller than 0.063 mm and equal 0.048 mm,0.038 mm,0.014 mm,0.012 mm,0.0063 mm,0.004 mm,0.003 mm,0.002 mm,and 0.001 mm,respectively.The extended method uses five steps to separate the general soil into many material sub-groups of gravel,sand,silt and clay with known particle size ranges.The complete PSD of the general soil is then calculated from the dry masses of the individual material sub-groups.The extended method is demonstrated with a general soil of completely decomposed granite(CDG)in Hong Kong,China.The silt and clay materials with different particle size ranges are further examined,checked and verified using stereomicroscopic observation,physical and chemical property tests.The results further confirm the correctness of the extended wet sieving method.

Petrology,geochemistry,and crystal size distribution of the basaltic andesite-dacite association at Mt.Sumbing,Central Java,Indonesia:Insights to magma reservoir dynamics and petrogenesis

Ten rock samples consisting of one pyroclastic density current(PDC1)deposit,seven lava flows(LF1–7),and two summit lava domes(LD1,2)were studied to understand the petrogenesis and magma dynamics at Mt.Sumbing.The stratigraphy is arranged as LF1,PDC1,LF2,LF3,LF4,LF5,LF6,LF7,LD1,and LD2;furthermore,these rocks were divided into two types.TypeⅠ,observed in the oldest(LF1)sample,has poor MgO and high Ba/Nb,Th/Yb and Sr.The remaining samples(PDC1–LD2)represent typeⅡ,characterized by high MgO and low Ba/Nb,Th/Yb and Sr values.We suggest that type I is derived from AOC(altered oceanic crust)-rich melts that underwent significant crustal assimilation,while typeⅡoriginates from mantle-rich melts with less significant crustal assimilation.The early stage of typeⅡmagma(PDC1–LF3)was considered a closed system,evolving basaltic andesite into andesite(55.0–60.2 wt%SiO_(2))with a progressively increasing phenocryst(0.30–0.48φ_(PC))and decreasing crystal size distribution(CSD)slope(from-3.9 to-2.9).The evidence of fluctuating silica and phenocryst contents(between 55.9–59.7 wt%and 0.25–0.41φ_(PC),respectively),coupled with the kinked and steep(from-5.0 to-3.3)CSD curves imply the interchanging condition between open(i.e.,magma mixing)and closed magmatic systems during the middle stage(LF4–LF6).Finally,it underwent to closed system again during the final stage(LF7–LD2)because the magma reached dacitic composition(at most 68.9 wt%SiO_(2))with abundant phenocryst(0.38–0.45φ_(PC))and gentle CSD slope(from-4.1 to-1.2).

Optical Modeling of Sea Salt Aerosols Using in situ Measured Size Distributions and the Impact of Larger Size Particles

Sea salt aerosols play a critical role in regulating the global climate through their interactions with solar radiation.The size distribution of these particles is crucial in determining their bulk optical properties.In this study,we analyzed in situ measured size distributions of sea salt aerosols from four field campaigns and used multi-mode lognormal size distributions to fit the data.We employed super-spheroids and coated super-spheroids to account for the particles’non-sphericity,inhomogeneity,and hysteresis effect during the deliquescence and crystallization processes.To compute the singlescattering properties of sea salt aerosols,we used the state-of-the-art invariant imbedding T-matrix method,which allows us to obtain accurate optical properties for sea salt aerosols with a maximum volume-equivalent diameter of 12μm at a wavelength of 532 nm.Our results demonstrated that the particle models developed in this study were successful in replicating both the measured depolarization and lidar ratios at various relative humidity(RH)levels.Importantly,we observed that large-size particles with diameters larger than 4μm had a substantial impact on the optical properties of sea salt aerosols,which has not been accounted for in previous studies.Specifically,excluding particles with diameters larger than 4μm led to underestimating the scattering and backscattering coefficients by 27%−38%and 43%−60%,respectively,for the ACE-Asia field campaign.Additionally,the depolarization ratios were underestimated by 0.15 within the 50%−70%RH range.These findings emphasize the necessity of considering large particle sizes for optical modeling of sea salt aerosols.

Particle size spatial distribution in landslide dams

The particle composition and spatial distribution of landslide-induced dam bodies are critical geotechnical parameters for studying the hazards of dam-break floods.However,current research often neglects the influence of the initial particle composition and spatial distribution of the landslide on the particle composition and spatial distribution of the landslide dam.This study investigated the impact of initial particle size distribution,volume,and sliding length on the energy and velocity changes of characteristic particles during the sliding process and the spatial distribution of particle sizes in the landslide dam body.Numerical simulations and physical models were employed to examine the effects of sequential gradient arrangements(where particle sizes decrease from top to bottom)and four other different initial particle arrangements on the energy and velocity changes of particles and the spatial distribution of particle sizes in the dam body.The study reveals the characteristics of translational and rotational energy of different particles and the laws of mechanical energy conversion,obtaining the spatial distribution patterns of particle sizes in landslide-induced dams.The results show that under the sequential gradient arrangement,the energy dissipation of the landslide movement is lower,with larger particles mainly distributed at the distal end and smaller particles at the proximal end of the landslide dam.In contrast,under the reverse gradient arrangement,the energy dissipation of the landslide movement is higher,and the distribution pattern of the dam particles is opposite to that of the sequential gradient arrangement.For the other arrangement modes,the spatial distribution of dam particles falls between the aforementioned two.There is a positive correlation between particle size and translational kinetic energy within the particle flow during the landslide process,and rotational motion increases energy dissipation.Under constant slope conditions,sliding length does not affect the movement pattern of the particle flow or the spatial distribution of particles in the dam body.The findings of this study provide a scientific basis for the accurate simulation and prediction of dam-break flood processes.

Variability of Raindrop Size Distribution during a Regional Freezing Rain Event in the Jianghan Plain of Central China

The characteristics of the raindrop size distribution(DSD)during regional freezing rain(FR)events that occur throughout the phase change(from liquid to solid)are poorly understood due to limited observations.We investigate the evolution of microphysical parameters and the key formation mechanisms of regional FR using the DSDs from five disdrometer sites in January 2018 in the Jianghan Plain(JHP)of Central China.FR is identified via the size and velocity distribution measured from a disdrometer,the discrete Fréchet distancemethod,surface temperature,human observations,and sounding data.With the persistence of precipitation,the emergence of graupel or snowflakes significantly reduces the proportion of FR.The enhancement of this regional FR event is mainly dominated by the increase in the number concentration of raindrops but weakly affected by the diameters.To improve the accuracy of quantitative precipitation estimation for the FR event,a modified second-degree polynomial relation between the shapeμand slopeΛof gamma DSDs is derived,and a new Z-R(radar reflectivity to rain rate)relationship is developed.The mean values of mass-weighted mean diameters(D_(m))and generalized intercepts(lgN_(w))in FR are close to the stratiform results in the northern region of China.Both the melting of tiny-rimed graupels and large-dry snowflakes are a response to the formation of this regional FR process in the JHP,dominated by the joint influence of the physical mechanism of warm rain,vapor deposition,and aggregation/riming coupled with the effect of weak convective motion in some periods.

Ion dynamics into different pore size distributions in supercapacitors under compression

Compressing supercapacitor(SCs)electrode is essential for improving the energy storage characteristics and minimizing ions’distance travel,faradaic reactions,and overall ohmic resistance.Studies comprising the ion dynamics in SC electrodes under compression are still rare.So,the ionic dynamics of five aqueous electrolytes in electrodes under compression were studied in this work for tracking electrochemical and structural changes under mechanical stress.A superionic state is formed when the electrode is compressed until the micropores match the dimensions with the electrolyte’s hydrated ion sizes,which increases the capacitance.If excessive compression is applied,the accessible pore regions decrease,and the capacitance drops.Hence,as the studied hydrated ions have different dimensions,the match between ion/pore sizes differs.To the LiOH and NaClO4electrolytes,increasing the pressure from 60 to 120 and 100 PSI raised the capacitance from 13.5 to 35.2 F g^(-1)and 30.9 to 39.0 F g^(-1),respectively.So,the KOH electrolyte with the lowest and LiCl with the biggest combination of hydrated ion size have their point of maximum capacitance(39.5 and 36.7F g^(-1))achieved at 140 and 80 PSI,respectively.To LiCl and KCl electrolytes,overcompression causes a drop in capacitance higher than 23%.

Statistical Characteristics of Raindrop Size Distribution in the South China Monsoon Region(Guangdong Province)

While heavy rainfall frequently takes place in southern China during summer monsoon seasons,quantitative precipitation forecast skills are relatively poor.Therefore,detailed knowledge about the raindrop size distribution(DSD)is useful in improving the quantitative precipitation estimation and forecast.Based on the data during 2018-2022 from 86stations in a ground-based optical disdrometer measurement network,the characteristics of the DSD in Guangdong province are investigated in terms of the particle size distribution(N(D)),mass-weighted mean diameter(Dm) and other integral DSD parameters such as radar reflectivity(Z),rainfall rate(R) and liquid water content(LWC).In addition,the effects of geographical locations,weather systems(tropical cyclones,frontal systems and the summer monsoon) and precipitation types on DSD characteristics are also considered.The results are shown as follows.1) Convective precipitation has a broader N(D) and larger mean particle diameter than the stratiform precipitation,and the DSD observations in Guangdong are consistent with the three-parameter gamma distribution.The relationships between the Z and R for stratiform and convective precipitation are also derived for the province,i.e.,Z=332.34 R1.32and Z=366.26R1.42which is distinctly different from that of the Next-generation Weather Radar(NEXRAD) Z-R relationship in United States.2) In the rainy season(April-September),the Dm, R and LWC are larger than those in the dry season(OctoberMarch).Moreover the above parameters are larger,especially in mid-May,which is the onset of the South China Sea summer monsoon.3) The spatial analysis of DSD shows that the coastal station observations indicate a smaller Dmand a larger normalized intercept parameter(log10Nw),suggestive of maritime-like rainfall.Dmis larger and log10Nwis smaller in the inland area,suggestive of continental-like rainfall.4) Affected by such weather systems as the tropical cyclone,frontal system and summer monsoon,the DSD shows characteristics with distinct differences.Furthermore,frontal system rainfall tends to present a continental-like rainfall,tropical cyclone rainfall tends to have a maritime-like rainfall,and summer monsoon rainfall characteristic are between maritime-and continental-like cluster(raindrop concentration and diameter are higher than continental cluster and maritime cluster,respectively.)

Raindrop Size Distribution Measurements at High Altitudes in the Northeastern Tibetan Plateau during Summer

Characteristics of raindrop size distribution during summer are studied by using the data from six Parsivel disdrometers located in the northeastern Tibetan Plateau.The analysis focuses on convective and stratiform precipitation at high altitudes from 2434 m to 4202 m.The results show that the contribution of stratiform and convective precipitation with rain rate between 1≤R<5 mm h^(-1) to the total precipitation increases with altitude,and the raindrop scale and number concentration of convective precipitation is larger than that for stratiform precipitation.The droplet size spectra of both stratiform and convective precipitation shows a single peak with a peak particle size between 0.31–0.50 mm,and they have essentially the same peak particle size and number concentration at the same altitude.The maximum spectral widths of stratiform clouds are between 4 mm and 5 mm,while those of convective clouds range from 4 mm to 8 mm.The Gamma distribution is more suitable than the Marshall-Palmer distribution in terms of the actual raindrop spectrum distribution.The stratiform precipitation particles are smaller with higher number concentration,while the opposite is true for the convective precipitation particles.The convective precipitation particles drop faster than stratiform precipitation particles when the particle size exceeds 2 mm,and the falling velocity of raindrops after standard curve fitting is underestimated during the observation period.Moreover,conventional radar estimation methods would underestimate the precipitation in the Northeastern Tibetan Plateau.

Utilizing sediment grain size characteristics to assess the effectiveness of clay–sand barriers in reducing aeolian erosion in Minqin desert area,China

The clay–sand barriers in Minqin desert area,China,represent a pioneering windbreak and sand fixation project with a venerable history of 60 a.However,studies on evaluating the long-term effectiveness of clay–sand barriers against aeolian erosion,particularly from the perspective of surface sediment grain size,are limited and thus insufficient to ascertain the protective impact of these barriers on regional aeolian activities.This study focused on the surface sediments(topsoil of 0–3 cm depth)of clay–sand barriers in Minqin desert area to explain their erosion resistance from the perspective of surface sediment grain size.In March 2023,six clay–sand barrier sampling plots with clay–sand barriers of different deployment durations(1,5,10,20,40,and 60 a)were selected as experimental plots,and one control sampling plot was set in an adjacent mobile sandy area without sand barriers.Surface sediment samples were collected from the topsoil of each sampling plot in the study area in April 2023 and sediment grain size characteristics were analyzed.Results indicated a predominance of fine and medium sands in the surface sediments of the study area.The deployment of clay–sand barriers cultivated a fine quality in grain size composition of the regional surface sediments,increasing the average contents of very fine sand,silt,and clay by 30.82%,417.38%,and 381.52%,respectively.This trend became markedly pronounced a decade after the deployment of clay–sand barriers.The effectiveness of clay–sand barriers in erosion resistance was manifested through reduced wind velocity,the interception of sand flow,and the promotion of fine surface sediment particles.Coarser particles such as medium,coarse,and very coarse sands predominantly accumulated on the external side of the barriers,while finer particles such as fine and very fine sands concentrated in the upwind(northwest)region of the barriers.By contrast,the contents of finest particles such as silt and clay were higher in the downwind(southeast)region of the sampling plots.For the study area,the deployment of clay–sand barriers remains one of the most cost-effective engineering solutions for aeolian erosion control,with sediment grain size parameters serving as quantitative indicators for the assessment of these barriers in combating desertification.The results of this study provide a theoretical foundation for the construction of windbreak and sand fixation systems and the optimization of artificial sand control projects in arid desert areas.

Microfluidic preparation of surfactant-free ultrafine DAAF with tunable particle size for insensitive initiator explosives

High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.

Measuring particle size distribution and total number in the activation chamber of desulfurization system by PIV

Application of particle image velocity (PIV) techniques for measuringparticle size distribution and total number in an activation chamber of desulfurization system isintroduced. Watersheld algorithm is used to choose the suitable initial gray level threshold whichis used to change the gray level images taken by PIV to black and white ones, then every particle inan image is isolated totally. For every isolating particle, its contour is tracked by the edgeenhancement filter function and kept by Freeman s chain code. Based on a set of particle s chincode, its size and size distribution are calculated and sorted. Finally, the experimental data ofcalcium particles and water drops, separately injected into the activation chamber, and the erroranalysis of data are given out.

Fractal features of size distribution of Chinese intercity bus hubs

Size distribution characteristics of intercity bus hubs in China from 1997 to 2（104 were analyzed regarding highway passenger volume as a size index of intercity bus hubs. Yearly fractal dimensions of intercity bus hub sizes were exactly calculated by a novel model. Fractal dimensions of the 200 biggest intercity bus hubs from 2000 to 2004 were 1. 486 2 to 1. 511 8, and that is consistent with fractal dimensions of Chinese urban system sizes. It showed that the size distribution of intercity bus hubs had fractal structure. Fractal dimensions from 1997 to 2004 indicated that intercity bus hub size distribution grew from bi-fractal to single fractal. It is concluded that the intercity bus hub system is in evolutionary progress, and the Central Government should support large intercity bus hubs more to optimize system structure.

Number concentration and size distributions of submicron particles in Jinan urban area:Characteristics in summer and winter

The aerosol number concentration and size distribution were measured with the newly developed Wide-range Particle Spectrometer in summer and winter of 2006 at the urban site of Jinan City. Here reported the characteristics of fine particles of the different observation seasons. Relative high number concentrations for the particles in the diameter range of 10-500 nm were observed in both seasons. It was found that the dominant number distributed in particle diameter smaller than 100 nm and the percentage over the number concentration of all air particles is much higher than what has been measured in other urban sites over the world. The number mean diameter in summer was much smaller than in winter, strongly suggesting the different origin of ultrafine particles in different seasons. That is, particles in ultrafine mode mainly came from nucleation and new particle formation in summer while from traffic emission in winter. The diurnal variation also supported this point. Number concentration in the diameter range of 10-200 um got their peak values at noontime, well correlated with the mixing ratio of SO2 and the intensity of solar radiation in summer. While in winter, those in the same diameter range showed the main peaks during the traffic hours happened in the morning and evening.

Size distribution and diffuse pollution impacts of PAHs in street dust in urban streams in the Yangtze River Delta

Particles of dust washed off streets by stormwater are an important pathway of polyaromatic hydrocarbons （PAHs） into urban streams. This article presented a comprehensive assessment of the size distribution of PAHs in street dust particles, the potential risks of the particles in urban streams, and the sources and sinks of PAHs in the stream network. This assessment was based on measurements of 16 PAHs from the USEPA priority list in street dust particles and river sediments in Xincheng, China. The content of total PAHs ranged from 1629 to 8986 Dg/kg in street dust particles, where smaller particles have a higher concentrations. Approximately 55% of the total PAHs were associated with particles less than 250 μm which accounted for 40% of the total mass of street dust. The PAH quantities increased from 2.41 to 46.86 μg/m2 in the sequence of new residential, rising through main roads, old town residential, commercial and industrial areas. The sediments in stream reaches in town were found to be sinks for street dust particle PAHs. The research findings suggested that particle size, land use and the hydrological conditions in the stream network were the factors which most influenced the total loads of PAH in the receiving water bodies.

Statistical Characteristics of Raindrop Size Distribution in the Tibetan Plateau and Southern China

The characteristics of raindrop size distribution （DSD） over the Tibetan Plateau and southern China are studied in this paper, using the DSD data from April to August 2014 collected by HSC-PS32 disdrometers in Nagqu and Yangjiang, com- prising a total of 9430 and 63661-rain raindrop spectra, respectively. The raindrop spectra, characteristics of parameter variations with rainfall rate, and the relationships between reflectivity factor （Z） and rainfall rate （R） are analyzed, as well as their DSD changes with precipitation type and rainfall rate. The results show that the average raindrop spectra appear to be one-peak curves, the number concentration for larger drops increase significantly with rainfall rate, and its value over southern China is much higher, especially in convective rain larger drops, especially for convective rain in southern China. Standardized Gamma distributions better describe DSD for All three Gamma parameters for stratiform precipitation over the Tibetan Plateau are much higher, while its shape parameter （,u） and mass-weighted mean diameter （Dm）, for convective precipitation, are less. In terms of parameter variation with rainfall rate, the normalized intercept parameter （Nw） over the Tibetan Plateau for stratiform rain increases with rainfall rate, which is opposite to the situation in convective rain. The/1 over the Tibetan Plateau for stratiform and convective precipitation types decreases with an increase in rainfall rate, which is opposite to the case for Dm variation. In Z-R relationships, like ＂Z = ARb＇＇, the coefficient A over the Tibetan Plateau is smaller, while its b is higher, when the rain type transfers from stratiform to convective ones. Furthermore, with an increase in rainfall rate, parameters A and b over southern China increase gradually, while A over the Tibetan Plateau decreases sub- stantially, which differs from the findings of previous studies. In terms of geographic location and climate over the Tibetan Plateau and southern China, the precipitation in the pre-flood seasons is dominated by strong convective rain, while weak convective rain occurs frequently in northern Tibet with lower humidity and higher altitude.

MICROPHYSICAL CHARACTERISTICS OF THE RAINDROP SIZE DISTRIBUTION IN TYPHOON MORAKOT(2009)

Microphysical characteristics of the raindrop size distribution(RSD)in Typhoon Morakot(2009) have been studied through the PARSIVEL disdrometer measurements at one site in Fujian province,China during the passage of the storm from 7 to 10 August 2009.The time evolution of the RSD reveals different segments of the storm.Significant difference was observed in the microphysical characteristics between the outer rainband and the eyewall;the eyewall precipitation had a broader size distribution(a smaller slope) than the outer rainband and eye region.The outer rainband and the eye region produced stratiform rains while the eyewall precipitation was convective or mixed stratiform-convective.The RSD was typically characterized by a single peak distribution and well represented by the gamma distribution.The relations between the shape(μ)and slope(Λ)of the gamma distribution and between the reflectivity(Z)and rainfall rate(R)have been investigated.Based on the NW-Dm relationships,we suggest that the stratiform rain for the outer rainband and the eye region was formed by the melting of graupel or rimed ice particles,which likely originated from the eyewall clouds.

Mechanical properties of Mg-8Gd-3Y-0.5Zr alloy with bimodal grain size distributions

The Mg-Gd-Y-Zn-Zr alloys are representational and potential age-hardening systems as reported in the past ten years,but their mechanical properties are still dependent on the grain size and its distribution.The effect of bimodal structure on mechanical properties of Mg-8Gd-3Y-0.5Zr alloy with bimodal grain size distributions was investigated.The results suggested that the volume fraction of fine grain(FG)and coarse grain(CG)could be controlled by combined processes of hot forging,extrusion and annealing.And for the present alloys with bimodal grain size distribution,the improvement of strength is still attributed to the grain refinement.The morphology of bimodal grain size distribution has a marked impact on the ductility of the alloy,i.e.with the increase of coarse grain volume fraction,the elongation to failure increases at the beginning and then decreases.The mechanism of the toughening effect of bimodal grain size distribution on the Mg-Gd-Y-Zn-Zr alloys with bimodal grain size structure has been discussed.

Mechanical properties of porous titanium with different distributions of pore size

To satisfy the mechanical and biological requirement of porous bone substitutes, porous Ti with two different pore sizes designed in advance was fabricated by the space-holder sintering process. Mechanical properties of the porous Ti were explored via room temperature compressive tests. The pore sizes and shapes are uniform throughout the specimens with porosities ranging from 36% to 63%. The compression strength and the elastic modulus are in the range from 94.05 to 468.57 MPa and 2.662 to 18 GPa, respectively. It is worth noting that the relationship between the compressive strength and the porosities is completely linear relation beyond the effect of pore size distributions on the mechanical properties. The value of the constant C achieved from the Gibson-Ashby model suggests that the pore sizes affect the yield strength of the porous Ti and the values of density exponent （n） for porous Ti with two different pore sizes are higher than 2, which suggests that the deformation mode of the porous Ti with a porosity ranging from 36% to 63% is mainly buckling of the cell struts.

An experimental study on size distribution and zeta potential of bulk cavitation nanobubbles

Nanobubble flotation technology is an important research topic in the field of fine mineral particle separation.The basic characteristics of nanobubbles,including their size,concentration,surface zeta potential,and stability have a significant impact on the nanobubble flotation performance.In this paper,bulk nanobubbles generated based on the principle of hydrodynamic cavitation were investigated to determine the effects of different parameters(e.g.,surfactant(frother)dosage,air flow,air pressure,liquid flow rate,and solution pH value)on their size distribution and zeta potential,as measured using a nanoparticle analyzer.The results demonstrated that the nanobubble size decreased with increasing pH value,surfactant concentration,and cavitation-tube liquid flow rate but increased with increasing air pressure and increasing air flow rate.The magnitude of the negative surface charge of the nanobubbles was positively correlated with the pH value,and a certain relationship was observed between the zeta potential of the nanobubbles and their size.The structural parameters of the cavitation tube also strongly affected the characteristics of the nanobubbles.The results of this study offer certain guidance for optimizing the nanobubble flotation technology.

Exogenous Application of Abscisic Acid or Gibberellin Acid Has Different Effects on Starch Granule Size Distribution in Grains of Wheat

Granule size distribution of wheat starch is an important characteristic that can affect its chemical composition and the functionality of wheat products. Two high-yield winter wheat cultivars were used to evaluate the effects of the application of exogenous ABA or GA during the reproductive phase of the initial grain filling on starch granule size distribution and starch components in grains at maturity. The results indicated that a bimodal curve was found in the volume and surface area distribution of grain starch granules, and a unimodal curve was observed for the number distribution under all treatments. The exogenous ABA resulted in a significant increase in the proportions （both by volume and by surface area） of B-type （〈9.9 Ixm in diameter） starch granules, with a reduction in those of A-type （〉9.9 ~tm） starch granules, while, the exogenous GA3 led to converse effects on size distribution of those starch granules. The exogenous ABA also increased starch, amylose and amylopectin contents at maturity but significantly reduced the ratio of amylose to amylopectin. Application of GA3 significantly reduced starch content, amylopectin content but increased the ratio of amylose to amylopectin. The ratio of amylose to amylopectin showed a significant and negative relationship with the volume proportion of granules 〈9.9 μm, but was positively related to the volume proportion of granules 22.8-42.8 μm.