A low carbon hypoeutectoid steel(0.19 wt%C)with proeutectoid ferrite and pearlite dual-components was subjected to surface plastic deformation via pipe inner surface grinding(PISG)at room temperature.The deformation m...A low carbon hypoeutectoid steel(0.19 wt%C)with proeutectoid ferrite and pearlite dual-components was subjected to surface plastic deformation via pipe inner surface grinding(PISG)at room temperature.The deformation microstructures for each component were systematically characterized along depth,and the patterns of structural evolution toward nanometer regime as well as the governing parameters were addressed.Proeutectoid ferrite grains were refined down to 17 nm,and the pattern covering a length scale of 4–5 orders of magnitude from micron-to nanometer-scale follows:formation of cellular dislocation structure(CDS),elongated dislocation structure(EDS),ultrafine lamellar structure(UFL)and finally the nanolaminated structure(NL).The pearlite experiences the deformation and refinement,and finally the transforming the ultrafine pearlite(UFP)into nanolaminated pearlite(NLP)with the ferrite lamellae as thin as 20 nm.Refinement for both UFL(UFP)and NL(NLP)can be realized via forming novel extended boundaries within ferrite lamellae.A critical lattice curvature of~2.8°is required for forming such extended boundary,corresponding to a minimum strain gradient of 0.25μm^(-1)for a 100 nm-thick lamella.Refinement below size limit(expressed by lamellar thickness d_Tin nm)is correlated with the strain gradient(χ,inμm^(-1))by:d_T=12.5/x.Refinement contributions from strain gradient caused by PISG processing and material heterogeneity were discussed.展开更多
TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures ...TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures of TiCx/Cu composites and the size of TiCx particles were investigated. Results showed that TiCx reinforcing particles size increases with decreasing Cu content in Cu-Ti-C reaction system. With carbon nanotubes（carbon black） serving as carbon source, the generated TiCx particles size transits from nanometer to submicron when Cu content corresponding to the reaction system is reduced to 60 vol%（70 vol%）; while graphite serves as carbon source, there is no clear limiting concentration. C particles with smaller size, larger specific surface area and better distribution result in finer TiCx particles, which is more beneficial to generating nano-sized TiCx/Cu composites.展开更多
The South China Sea(SCS), which is the largest marginal sea in the western tropical Pacific, plays an important role in regional climate change. However, the research on the phytoplankton community structure(PCS) resp...The South China Sea(SCS), which is the largest marginal sea in the western tropical Pacific, plays an important role in regional climate change. However, the research on the phytoplankton community structure(PCS) response to the upwelling remains inadequate. In January 2014, the upwelling simulation experiment was performed in the western SCS. Results indicate that the nutrient-rich bottom water not only increased the total Chlorophyll a(Chl a) concentrations, but would potentially altered the PCS. Due to new nutrients added, microphytoplankton had more sensitivity response to nutrient uptake than other phytoplankton groups. The variation of nutrients induced by formation, weakening and disappearance of upwelling resulted in phytoplankton species succession from cyanophyta to bacillariophyta. It may be the leading factor of the changes in PCS and size-fractionated Chl a. The initial concentration of DIP less than 0.1 μmol L-1 could not sustain the phytoplankton growth. This indicates that phosphorus may be the limiting factor in the western SCS.展开更多
鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技...鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技术概念更清晰,使用更方便;实事求是,更赋灵活性:分级表中,所有浓度值都是累积,包括所有大于等于关注粒径(Considered particle size)的粒子的最大允许浓度值(Maximun allowable concentration siae),浓度限值。区域粒子浓度太高,浓度限值不适用;或者由于低浓度时采样和统计方法的局限性区域分级不适用。按统计学技术概念,决定检测洁净度最少采样点数N_(L);N_(L)值与洁净度无直接关联。作为标准应用的补充,超净环境检测需关注超高过滤器滤材最易穿透粒径MPPS,Most penetrating particle size。展开更多
通过蒙特卡罗程序MCNP(Monte Carlo N Particle Transport Code)建立了海洋γ谱连续监测的测量模型,模拟计算不同能量γ射线在海水中的衰减情况和有效探测距离。根据我国近岸海域海水中天然放射性核素活性浓度,模拟得到不同晶体尺寸NaI...通过蒙特卡罗程序MCNP(Monte Carlo N Particle Transport Code)建立了海洋γ谱连续监测的测量模型,模拟计算不同能量γ射线在海水中的衰减情况和有效探测距离。根据我国近岸海域海水中天然放射性核素活性浓度,模拟得到不同晶体尺寸NaI探测器连续监测的本底谱,分析能量分辨率对全能峰本底计数率的影响并探讨了影响NaI探测器能量分辨率的因素。最后针对我国核电厂周围海域中重点关注的人工放射性核素,并假设不同尺寸NaI晶体在能量662 keV处分辨率保持7.0%不变的条件下,分别计算了不同尺寸NaI晶体探测器在海洋γ谱连续监测中的探测效率、本底计数率和最小可探测活性浓度等技术参数。模拟结果为海洋或其它水体中γ谱连续监测方法的应用提供技术参考。展开更多
基金the Hundred Outstanding Creative Talents Projects in Hebei University,Chinathe Project Program of Heavy Machinery Collaborative Innovation CenterChina and the National Natural Science Foundation of China(No.51171182)。
文摘A low carbon hypoeutectoid steel(0.19 wt%C)with proeutectoid ferrite and pearlite dual-components was subjected to surface plastic deformation via pipe inner surface grinding(PISG)at room temperature.The deformation microstructures for each component were systematically characterized along depth,and the patterns of structural evolution toward nanometer regime as well as the governing parameters were addressed.Proeutectoid ferrite grains were refined down to 17 nm,and the pattern covering a length scale of 4–5 orders of magnitude from micron-to nanometer-scale follows:formation of cellular dislocation structure(CDS),elongated dislocation structure(EDS),ultrafine lamellar structure(UFL)and finally the nanolaminated structure(NL).The pearlite experiences the deformation and refinement,and finally the transforming the ultrafine pearlite(UFP)into nanolaminated pearlite(NLP)with the ferrite lamellae as thin as 20 nm.Refinement for both UFL(UFP)and NL(NLP)can be realized via forming novel extended boundaries within ferrite lamellae.A critical lattice curvature of~2.8°is required for forming such extended boundary,corresponding to a minimum strain gradient of 0.25μm^(-1)for a 100 nm-thick lamella.Refinement below size limit(expressed by lamellar thickness d_Tin nm)is correlated with the strain gradient(χ,inμm^(-1))by:d_T=12.5/x.Refinement contributions from strain gradient caused by PISG processing and material heterogeneity were discussed.
文摘TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures of TiCx/Cu composites and the size of TiCx particles were investigated. Results showed that TiCx reinforcing particles size increases with decreasing Cu content in Cu-Ti-C reaction system. With carbon nanotubes（carbon black） serving as carbon source, the generated TiCx particles size transits from nanometer to submicron when Cu content corresponding to the reaction system is reduced to 60 vol%（70 vol%）; while graphite serves as carbon source, there is no clear limiting concentration. C particles with smaller size, larger specific surface area and better distribution result in finer TiCx particles, which is more beneficial to generating nano-sized TiCx/Cu composites.
基金upport of the National Programme on Global Change and Air-Sea Interaction (GASI-03-01-02-01)
文摘The South China Sea(SCS), which is the largest marginal sea in the western tropical Pacific, plays an important role in regional climate change. However, the research on the phytoplankton community structure(PCS) response to the upwelling remains inadequate. In January 2014, the upwelling simulation experiment was performed in the western SCS. Results indicate that the nutrient-rich bottom water not only increased the total Chlorophyll a(Chl a) concentrations, but would potentially altered the PCS. Due to new nutrients added, microphytoplankton had more sensitivity response to nutrient uptake than other phytoplankton groups. The variation of nutrients induced by formation, weakening and disappearance of upwelling resulted in phytoplankton species succession from cyanophyta to bacillariophyta. It may be the leading factor of the changes in PCS and size-fractionated Chl a. The initial concentration of DIP less than 0.1 μmol L-1 could not sustain the phytoplankton growth. This indicates that phosphorus may be the limiting factor in the western SCS.
文摘鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技术概念更清晰,使用更方便;实事求是,更赋灵活性:分级表中,所有浓度值都是累积,包括所有大于等于关注粒径(Considered particle size)的粒子的最大允许浓度值(Maximun allowable concentration siae),浓度限值。区域粒子浓度太高,浓度限值不适用;或者由于低浓度时采样和统计方法的局限性区域分级不适用。按统计学技术概念,决定检测洁净度最少采样点数N_(L);N_(L)值与洁净度无直接关联。作为标准应用的补充,超净环境检测需关注超高过滤器滤材最易穿透粒径MPPS,Most penetrating particle size。
文摘通过蒙特卡罗程序MCNP(Monte Carlo N Particle Transport Code)建立了海洋γ谱连续监测的测量模型,模拟计算不同能量γ射线在海水中的衰减情况和有效探测距离。根据我国近岸海域海水中天然放射性核素活性浓度,模拟得到不同晶体尺寸NaI探测器连续监测的本底谱,分析能量分辨率对全能峰本底计数率的影响并探讨了影响NaI探测器能量分辨率的因素。最后针对我国核电厂周围海域中重点关注的人工放射性核素,并假设不同尺寸NaI晶体在能量662 keV处分辨率保持7.0%不变的条件下,分别计算了不同尺寸NaI晶体探测器在海洋γ谱连续监测中的探测效率、本底计数率和最小可探测活性浓度等技术参数。模拟结果为海洋或其它水体中γ谱连续监测方法的应用提供技术参考。
