The telescopic boom is the main bearing force component of the crane.The rationality of the design will directly affect the performance of the machine and safety.The telescopic boom is a typical thin-walled plate and ...The telescopic boom is the main bearing force component of the crane.The rationality of the design will directly affect the performance of the machine and safety.The telescopic boom is a typical thin-walled plate and shell structure.Its main form of damage is the occurrence of buckling,resulting in decreased carrying capacity,or even a security incident.In order to meet the lifting weight and height,to ensure the stability of the telescopic boom has become a major problem of the designer.There are many factors that affect the critical load of the telescopic boom,including support method,inertia moment,length and material.When the support mode,material and length are determined,the maximum factor affecting the buckling critical load is the inertia moment.In this paper,the influence of the section size on the buckling critical load of the telescopic boom is analyzed by using the inertia moment of section method ande finite element method.And the sensitivity analysis is carried out on this basis.The results of the analysis can provide designers with design reference basis.Then a reasonable cross-sectional size can be used to improve the buckling resistance capacity of the telescopic boom.展开更多
It has been repeatedly observed that the mechanical properties of microtomed wood sections are significantly lower than those of samples of normal size, but few investigations have been conducted to deal with this top...It has been repeatedly observed that the mechanical properties of microtomed wood sections are significantly lower than those of samples of normal size, but few investigations have been conducted to deal with this topic, especially based on theoretical approaches. We measured the longitudinal MOE of Chinese fir on microtomed sections ranging in thickness from 70 to 200 μm and compared these with the values of samples of normal size. The results indicate that the MOE of microtomed wood sections increases with thickness from 70 to 200 μm, but is significantly less than that of normal samples. A size effect coefficient of 2.63 is inferred based on statistical data for samples of normal size and 200 μm thick microtomed sections. Finally, an explanation based on a complete shear restraint model of cell walls and a single fiber multi-ply model is proposed for the size effect on stiffness of microtomed wood sections.展开更多
The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to ab...The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to abbreviate ten physical and mechanical parametersto three dimensionless groups, and then the similarity criterion and coefficient ofthe experiment were determined and calculated based on particle size distribution curve.The similarity model was designed and constructed to represent the process of the minespoil pile.The profile of the final model shows that the small sized particles mainly composethe upper zone of the mine spoil pile, while the bottom of the pile is dominated bybigger sized particles, and the intermediate section presents a zigzag stripe cross-beddingstructure which is composed by small-medium scale particles and medium-large scaleparticles.Each stripe has two critical angles: one is the angle in which gangue particlescan maintain their stability condition, with approximate range from 24° to 26°; and theother is the angle in which particles can stop gliding downwards, approximately varyingfrom 34° to 36°.展开更多
基金supported by the National Natural Science Foundation of China (51575370)Natural Science Foundation of Shanxi Province (201901D111236)Nanchong 2023 Municipal Science and Technology Plan Project (23YYJCYJ0023)。
文摘The telescopic boom is the main bearing force component of the crane.The rationality of the design will directly affect the performance of the machine and safety.The telescopic boom is a typical thin-walled plate and shell structure.Its main form of damage is the occurrence of buckling,resulting in decreased carrying capacity,or even a security incident.In order to meet the lifting weight and height,to ensure the stability of the telescopic boom has become a major problem of the designer.There are many factors that affect the critical load of the telescopic boom,including support method,inertia moment,length and material.When the support mode,material and length are determined,the maximum factor affecting the buckling critical load is the inertia moment.In this paper,the influence of the section size on the buckling critical load of the telescopic boom is analyzed by using the inertia moment of section method ande finite element method.And the sensitivity analysis is carried out on this basis.The results of the analysis can provide designers with design reference basis.Then a reasonable cross-sectional size can be used to improve the buckling resistance capacity of the telescopic boom.
基金the National Natural Science Foundation of China (Grant No. 30730076 and 30400337) for financial support
文摘It has been repeatedly observed that the mechanical properties of microtomed wood sections are significantly lower than those of samples of normal size, but few investigations have been conducted to deal with this topic, especially based on theoretical approaches. We measured the longitudinal MOE of Chinese fir on microtomed sections ranging in thickness from 70 to 200 μm and compared these with the values of samples of normal size. The results indicate that the MOE of microtomed wood sections increases with thickness from 70 to 200 μm, but is significantly less than that of normal samples. A size effect coefficient of 2.63 is inferred based on statistical data for samples of normal size and 200 μm thick microtomed sections. Finally, an explanation based on a complete shear restraint model of cell walls and a single fiber multi-ply model is proposed for the size effect on stiffness of microtomed wood sections.
基金Supported by the National Natural Science Foundation of China(50874102,50974070)
文摘The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to abbreviate ten physical and mechanical parametersto three dimensionless groups, and then the similarity criterion and coefficient ofthe experiment were determined and calculated based on particle size distribution curve.The similarity model was designed and constructed to represent the process of the minespoil pile.The profile of the final model shows that the small sized particles mainly composethe upper zone of the mine spoil pile, while the bottom of the pile is dominated bybigger sized particles, and the intermediate section presents a zigzag stripe cross-beddingstructure which is composed by small-medium scale particles and medium-large scaleparticles.Each stripe has two critical angles: one is the angle in which gangue particlescan maintain their stability condition, with approximate range from 24° to 26°; and theother is the angle in which particles can stop gliding downwards, approximately varyingfrom 34° to 36°.
