Analysis of a landfill cover without geomembrane using varied particle sizes of recycled concrete

Previous studies have demonstrated the effectiveness of a novel three-layer landfill cover system constructed with recycled concrete aggregates(RCAs)without geomembrane in both laboratory and field.However,no systematic investigation has been carried out to optimize the combination of the particle sizes for fine-grained RCAs(FRC)and coarse-grained RCAs(CRC)that can be used for the three-layer landfill cover system.The aim of this paper is to assist engineers in designing the three-layer landfill cover system under a rainfall of 100-year return period in humid climate conditions using an easily controlled soil parameter D10 of RCAs.The numerical study reveals that when D10 of FRC increases from 0.05 mm to 0.16 mm,its saturated permeability increases by 10 times.As a result,a larger amount of rainwater infiltrates into the cover system,causing a higher lateral diversion in both the top FRC and middle CRC layers.No further changes in the lateral diversion are observed when the D10 value of FRC is larger than 0.16 mm.Both the particle sizes of FRC and CRC layers are shown to have a minor influence on the percolation under the extreme rainfall event.This implies that the selection of particle sizes for the FRC and CRC layers can be based on the availability of materials.Although it is well known that the bottom layer of the cover system should be constructed with very fine-grained soils if possible,this study provides an upper limit to the particle size that can be used in the bottom layer(D10 not larger than 0.02 mm).With this limit,the three-layer system can still minimize the water percolation to meet the design criterion(30 mm/yr)even under a 100-year return period of rainfall in humid climates.

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti_(3)C_(2)T_(x) MXene with Controllable Sizes and Improved Yield

A good method of synthesizing Ti_(3)C_(2)T_(x)(MXene)is critical for ensuring its success in practical applications,e.g.,electromagnetic interference shielding,electrochemical energy storage,catalysis,sensors,and biomedicine.The main concerns focus on the moderation of the approach,yield,and product quality.Herein,a modified approach,organic solvent-assisted intercalation and collection,was developed to prepare Ti_(3)C_(2)T_(x) flakes.The new approach simultaneously solves all the concerns,featuring a low requirement for facility(centrifugation speed<4000 rpm in whole process),gram-level preparation with remarkable yield(46.3%),a good electrical conductivity(8672 S cm^(−1)),an outstanding capacitive performance(352 F g^(−1)),and easy control over the dimension of Ti_(3)C_(2)T_(x) flakes(0.47–4.60μm^(2)).This approach not only gives a superb example for the synthesis of other MXene materials in laboratory,but sheds new light for the future mass production of Ti_(3)C_(2)T_(x) MXene.

Model of homogenisation for analysing the effect of micrometre pore sizes on the elastic moduli of porous materials

A homogenisation model for analysing the effect of micrometre pore sizes on the engineering moduli of elasticity of porous materials was proposed.In the proposed model,the engineering coefficients of localization of total strains(LTS coefficients)are considered instead of the classical strain localization tensors.For a pore,these coefficients represent the ratio of the sum of the strains in the volume of the pore to the sum of the strains in the volume of the porous body.To estimate the elastic moduli of a material with an arbitrary pore size,it is sufficient to have information about the elastic moduli and the LTS coefficient of a material with one basic pore size.Then,in Eshelby's model of equivalent inclusion,a transition to LTS coefficient for material with arbitrary pore size is achieved,and its elasticity moduli are determined.The results for Young's modulus of porous titanium,with different sizes of spherical pores,completely conform with the experimental data.We have obtained a model theoretic estimate of the upper bounds of Young's modulus of porous materials with infinitely small pore size.For the spherical pores,the proposed assessment coincides with the upper limits of the Hashin-Shtrikman bounds.

Effects of Ru nanoparticle sizes confined in cavities of SBA-16 on the catalytic performance of Fischer-Tropsch synthesis reaction

Ru nanoparticles with different sizes confined in the cavities of mesoporous SBA-16 have been successfully synthesized by incipient wetness impregnation method with a Ru loading of 4 wt%. The catalysts were characterized by XRD, N2 adsorption-desorption, H2-TPR, H2-TPD, O2-titration and TEM. The catalytic performance of Fischer-Tropsch synthesis over the catalyst was tested in a fixed-bed reactor. The addition of citric acid in the impregnation procedure shows a significant influence on the size of Ru nanoparticles. The selectivity to C5＋ increases, while the selectivities to methane and C2-C4 light hydrocarbons decrease with Ru average particles size from 2.0 nm to 9.3 nm, . The Ru catalyst confined in the SBA-16 with average nanoparticle size of 5.3 nm gives the best activity.

The Sizes of Sitophilus zeamais in Different Life Stage

Knowing the developmental states of stored grain insects, especially for the immature stages hidden in cereal kernel, such as Sitophilus zeamais, could be in favor of monitoring early and controlling effectively. Atlas and scale parameters on different developmental stages of S. zeamais in wheat kernel were captured and described by three-dimensional microscope of super depth of field observation. The four instars of larva, pre-pupa, pupa, new adult, old adult in kernel could be seen by dissecting the infested kernels. The length, height, and width of larva body increased with insect development and centralized the sizes corresponding to the four instars of larva. The length of larva body centralized near 554, 746, 1 462, and 2 147 μm. The height of larva body centralized about 388, 575, 847, and 1 651 μm. The width of larva body centralized near 340, 598, 798, and 1 568 μm. Head capsule width was in same size for each exuviating period, centralized near 203, 317, 535, and 603 μm, and got big sharply with the instar changed. Developmental duration of four larva instars was about 21 days reared in wheat, less than 28 days reared in maize as published. The atlas and description should be helpful for monitoring the S. zeamais development hidden in cereal kernels and designing control strategy.

Influence of parental sample sizes on the estimating genetic parameters in cultured clam Meretrix meretrix based on factorial mating designs

The precise and accurate knowledge of genetic parameters is a prerequisite for making efficient selection strategies in breeding programs.A number of estimators of heritability about important economic traits in many marine mollusks are available in the literature,however very few research have evaluated about the accuracy of genetic parameters estimated with different family structures.Thus,in the present study,the effect of parent sample size for estimating the precision of genetic parameters of four growth traits in clam M.meretrix by factorial designs were analyzed through restricted maximum likelihood（REML） and Bayesian.The results showed that the average estimated heritabilities of growth traits obtained from REML were 0.23-0.32 for 9 and 16 full-sib families and 0.19-0.22 for 25 full-sib families.When using Bayesian inference,the average estimated heritabilities were0.11-0.12 for 9 and 16 full-sib families and 0.13-0.16 for 25 full-sib families.Compared with REML,Bayesian got lower heritabilities,but still remained at a medium level.When the number of parents increased from 6 to 10,the estimated heritabilities were more closed to 0.20 in REML and 0.12 in Bayesian inference.Genetic correlations among traits were positive and high and had no significant difference between different sizes of designs.The accuracies of estimated breeding values from the 9 and 16 families were less precise than those from 25 families.Our results provide a basic genetic evaluation for growth traits and should be useful for the design and operation of a practical selective breeding program in the clam M.meretrix.

An Artificial Neural Network for Estimating Sizes of Spot Welding Nuggets

Sizes of nuggets are often used to evaluate spot weld quality in production. This paper presents a neural estimator used to carry out non-destructive on-line analysis of spot weld quality in which trained ANN functions to map dynamic resistance characteristics into sizes of spot weld nuggets and results confirm the validity of neural network for this type of application.

FLOWING FILM JIGGING FUNCTION IN THE NEW″IFFC″PROCESS FOR SEPARATING MINERALS OF ULTRAFINE SIZES

The concept of the flowing film jigging was first applied to the flowing film concentration area.The flowingfilm jigging function is an important element of the new process,in jection-flowing film centrifugation(IFFC),for separating and recovering minerals of ultrafine sizes.

X-RAY MEASUREMENT OF THE GRAIN SIZES OF WSi_(2) FORMED IN COSPUTTERED W-Si FILMS

The broadening of X-ray diffraction peaks has been used successfully to measure the grain sizes of WSi_(2) in cosputtered W-Si films after annealing.The grain size of WSi_(2) increases with annealing temperature and reaches 115nm after annealing at 1000°C.The grain sizes are quite similar to that obtained by transmission electron microscope in electron beam coevaporated film and low pressure chemical vapor deposited film.

Determination of Particle Sizes and Crystalline Phases on Colloidal Silicon Nanoparticle Suspensions

Particle size and crystallinity of silicon nanoparticles were determined by analyzing the optical extinction spectra of colloidal suspensions. Experimental results from these colloids were anaiyzed using Mie theory in connection with effective medium theory, in order to determine particle sizes and their internal structure with the simple technique of optical transmission spectroscopy. By modeling an effective refractive index for the particles, the crystalline volume fraction can be extracted from extinction spectra in addition to information about the size. The crystalline volume fraction determined in this way were used to calibrate the ratio of the Raman cross sections for nanocrystalline and amorphous silicon, which was found to be σc./σa = 0.66

Effect of proteins,polysaccharides,and particle sizes on sludge dewaterability

Four batch experiments of hydrolysis and acidification were carried out to investigate the distributions of proteins （PN） and polysaccharides （PS） in the sludge, the PN/PS ratio, the particle sizes, and their relationship with sludge dewaterability （as determined by capillary suction time, CST）. The sludge flocs were stratified through centrifugation- and ultrasound-based method into four fractions： （1） slime, （2） loosely bound extracellular polymeric substances （LB-EPS）, （3） tightly bound EPS （TB-EPS）, and （4） pellet. The results showed that PN was mainly partitioned in the pellet （80.7%） and TB-EPS （9.6%） fractions, while PS distributed evenly in the four fractions. During hydrolysis and acidification, PN was transferred from the pellet and TB-EPS fractions to the slime fraction, but PS had no significant transfer trends. The mean particle sizes of the sludge flocs decreased with hydrolysis and acidification. The pH had a more significant influence on the dewaterability of sludge flocs than temperature. Sludge dewaterability during hydrolysis and acidification processes greatly deteriorated from 9.7 s at raw sludge to 340-450 s under alkaline conditions. However, it was just slightly increased under acidic conditions. Further investigation suggested that CST was affected by soluble PN, soluble PN/PS, and particle sizes of sludge flocs, but was affected slightly by total PN, PS, or PN/PS in the whole sludge flocs and other fractions （except slime）.

Leaching behavior of V,Pb,Cd,Cr,and As from stone coal waste rock with different particle sizes

This paper investigates the leaching behavior of heavy metals(V,Pb,Cd,Cr,and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments.The results show that the dissolved concentrations of V and As initially increased and then slightly decreased as time progressed and that the dissolved concentrations of Pb,Cd,and Cr were high in the early stage before decreasing.The particle size of the stone coal waste rocks strongly influenced the heavy metal concentration in the leaching solutions.The effects of the particle size of the stone coal waste rocks on the dissolved concentrations of V,Pb,and As decreased in the order fine fraction > medium fraction > coarse fraction,and the effects of particle size on the dissolved concentrations of Cr and Cd decreased in the order medium fraction > coarse fraction > fine fraction and coarse fraction > medium fraction > fine fraction,respectively.The quantities of heavy metals dissolved from the stone coal waste rock with fine particle sizes were observed to decrease in the order V(17104.36 μg/kg) > As(609.41 μg/kg) > Pb(469.24 μg/kg) > Cr(56.35 μg/kg) > Cd(27.52 μg/kg),and the dissolution rates decreased in the order As(2.96%) > Pb(0.93%) > V(0.35%) > Cd(0.25%) > Cr(0.01%).The specific surface area,pore size of the stone coal waste rocks,and chemical forms of heavy metals also influenced the release of heavy metals from the stone coal waste rocks.Kinetic analysis showed that the dissolution of heavy metals fundamentally agreed with the rate equation controlled by the shrinking core model.The results of this study are expected to serve as a reference for the evaluation of heavy metals contamination from stone coal waste rocks.

Microstructure, Content and in vitro Release of Brucine and Strychnine in Strychnos Nux-Vomica Powder with Different Particle Sizes

To explore the effect of particle size on the quality uniformity and in vitro release performance of Strychnos nux-vomica powder, seven samples of Strychnos nux-vomica powder with different particle sizes were prepared.Microstructures and particle sizes were analyzed, and high performance liquid chromatography(HPLC) was used to test the contents and in vitro release performances of brucine and strychnine in the samples. Results showed that the contents and the in vitro release rates of brucine(or strychnine) in different samples were different since there are different proportions of endosperms to epidermal cells in Strychnos nux-vomica powder with different particle sizes. Brucine and strychnine in each sample were promptly released in the first ten minutes and their cumulative release rates were higher than 70% after ten minutes. Eighty minutes later, the cumulative release rate tended to be a constant. Considering the quality uniformity and safety of Strychnos nux-vomica powder used as traditional Chinese medicine, it would be better to control the particle size of Strychnos nux-vomica powder between 100 and 140 mesh in which the maximum cumulative release rate in vitro of brucine and strychnine can be relatively low within this range.

Differences in Thermal Preference and Tolerance among Three Phrynocephalus Lizards (Agamidae) with Different Body Sizes and Habitat Use

We acclimated adults of two viviparous （Phrynocephalus guinanens＆ and P. vlangalii） and one oviparous （P. versicolor） species of toad-headed lizards （Agamidae） to 28 ℃, 33 ℃ and 38 ℃ to examine whether thermal preference （preferred body temperature, Tp） and thermal tolerance （critical thermal minimum, CTMin; critical thermal maximum, CTMax） were affected by acclimation temperature, and correlate with body size and habitat use. Both Tp and CTMax were highest in P. versicolor and lowest in P. vlangalii, with P. guinanensis in between. The two viviparous species did not differ in CTMin and thermal tolerance range, and they both were more resistant to low temperatures and had a wider range of thermal tolerance than the oviparous species. Both CTMin and CTMax shifted upward as acclimation temperature increased in all the three species. Tp was higher in the lizards acclimated to 33 ℃ than in those to 28 ℃ or 38 ℃. The range of thermal tolerance was wider in the lizards acclimated to 28 ℃ than in those to 33 ℃ or 38 ℃. The data showed that： 1） thermal preference and tolerance were affected by acclimation temperature, and differed among the three species of Phrynocephalus lizards with different body sizes and habitat uses; 2） both Tp and CTMax were higher in the species exchanging heat more rapidly with the environment, and CTMin was higher in the species using warmer habitats during the active season; and 3） thermal preference and tolerance might correlat with body size and habitat use in Phrynocephalus lizards.

Powder electrochemical properties with different particle sizes of spinel LiAl_(0.05)Mn_(1.95)O_4 synthesized by sol-gel method

An Al-doped spinel lithium manganese oxide was prepared by the adipic acid-assisted sol-gel method at 800℃, and the cathode materials （Liml0.05Mnl.9504） with different particle sizes were obtained through ball milling. The effects of particle size on the electrochemical performance of LiAl0.05Mnl.9504 samples were investigated by differential thermal analysis and thermogravimetry, X-ray diffraction, galvanostatic charge-discharge test, cyclic voltammetry, and electrochemical impedance spectroscopy. The results indicate that all samples with different particle sizes show the same pure spinel phase and good crystal structure; LiAlo.osMnl.9504 with Dso = 17.3 μm shows better capacity retention; LiAlo.osMnl.gsO4 cathode materials with small particle size have a bigger resistance of charge transfer than the large one, and the particle size has significant effects on the electrochemical performance of Al-doped spinel LiMn2O4 cathode materials.

Thermal conductivity of diamond/copper composites with a bimodal distribution of diamond particle sizes prepared by pressure infiltration method

The thermal conductivity of diamond/copper composites with bimodal particle sizes was studied. The composites were prepared through pressure infiltration of liquid copper into diamond preforms with a mixture of 40 and 100 pm-size diamonds. The permeability of the preforms with different coarse-to-fine volume ratios of diamonds was investigated. The thermal conductivity of the diamond/copper composites with bimodal size distribution was compared to the theoretical value derived from an analytical model developed by Chu. It is predicted that the diamond/copper composites could reach a higher thermal conductivity and their surface roughness could be improved by applying bimodal diamond particle sizes.

Effects of piperacillin synthesis on the infterfacial tensions and droplet sizes

Piperacillin is a polar organic substance,and can reduce the interfacial tension of oil and water when dissolved in water.In this study,changes in dichloromethane–water interfacial tensions and microdroplet sizes during piperacillin synthesis from an aqueous solution of ampicillin and dichloromethane solution of 4-ethyl-2,3-dioxo-1-piperazine carbonyl chloride(EDPC)were observed using a pendent drop technique and a coaxial ring tube system with embedded high-speed camera,respectively.It was found that the rapid N-acylation reaction caused the piperacillin at the interface to synthesize rapidly and diffuse out slowly,resulting in the interfacial tension decreased from 19.5 m N·m-1 to 7.2 m N·m-1 rapidly and then increased slowly as the concentrations of ampicillin and EDPC were 0.05 mol·L-1 and 0.1 mol·L-1.Meanwhile,the increase in the concentration of EDPC increased the peak concentration of piperacillin at the interface,and the addition of ethyl acetate to the ampicillin solution promoted mass transfer and reduced the aggregation of piperacillin effectively.During synthesis,the interfacial tension decreased,leading to a change in droplet sizes in the micro-reaction system.The two-phase reaction was carried out in a coaxial ring tube,with ampicillin and EDPC solutions as continuous and dispersed phases,respectively.The reaction reduced the dripping flow area,and the addition of ethyl acetate to the ampicillin solution slightly affected the division of the flow pattern.Under the same flow conditions,the droplet sizes of the reaction group were smaller than those of the no reaction group.The experimental results demonstrated that the increase of the continuous phase,decrease in the dispersed phase flow rate,or increase in EDPC concentration making droplet sizes smaller,and the addition of ethyl acetate slightly affected droplet sizes.These findings are important for the design and optimization of piperacillin synthesis reactors.

Study on Cutting Force,Cutting Temperature and Machining Residual Stress in Precision Turning of Pure Iron with Different Grain Sizes

Pure iron is one of the difficult-to-machine materials due to its large chip deformation,adhesion,work-hardening,and built-up edges formation during machining.This leads to a large workpiece deformation and challenge to meet the required technical indicators.Therefore,under varying the grain size of pure iron,the influence of cutting speed,feed,and depth of cut on the cutting force,heat generation,and machining residual stresses were explored in the turning process to improve the machinability without compromising the mechanical properties of the material.The experimental findings have depicted that the influence of grain size on cutting force in the precision turning process is not apparent.However,the cutting temperature and residual stress of machining fine-grain iron were much smaller than the coarse grain at all levels of cutting parameters.

Preparation of graphene oxides with different sheet sizes by temperature control

The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparation in different application fields. According to our previous theoretical calculations of the effect of temperature on the oxidation process of graphene, we use Hummers method to prepare GOs with different sheet sizes by simply controlling the temperature condition in the process of the oxidation reaction of potassium permanganate （KMnO4） with graphene and the dilution process with deionized water. The results detected by transmission electron microscopy （TEM） and atomic force microscopy （AFM） show that the average sizes of GO sheets prepared at different temperatures are about 1 μm and 7 μm respectively. The ultraviolet-visible spectroscopy （UV-vis） shows that lower temperature can lead to smaller oxidation degrees of GO and less oxygen functional groups on the surface. In addition, we prepare GO membranes to test their mechanical strengths by ultrasonic waves, and we find that the strengths of the GO membranes prepared under low temperatures are considerably higher than those prepared under high temperatures, showing the high mechanical strengths of larger GO sheets. Our experimental results testify our previous theoretical calculations. Compared with the traditional centrifugal separation and chemical cutting method, the preparation process of GO by temperature control is simple and low-cost and also enables large-size synthesis. These findings develop a new method to control GO sheet sizes for large-scale potential applications.

Effect of Pelleted Total Mixed Ration of Different Particle Sizes on Production Performance and Serum Biochemical Index of Fattening Hainan Black Goats

[Objective] The paper to investigate the effects of pelleted total mixed ration of different particle size on production performance and serum biochemical index of fattening Hainan black goats.[Method] Thirty-six fattening Hainan black goats with the same genetic backgrounds and similar initial weight of(19.02±0.22) kg were randomly divided into three treatments. Goats were fed with Juncao+concentrate(control group), pel-leted total mixed ration I(particle size 6 mm, experimental group I) and II(particle size 5 mm, experimental group II), respectively. The trial lasted 45 d.[Result](1) The final weight and daily gain of experimental group II were significantly higher than those of control group( P<0.05), and the daily gain of experimental group II was also higher than that of experimental group I(P<0.05);the feed intake of experimental group II was markedly higher than that of control group(P<0.05), but was significantly lower than that of experimental group I(P<0.05). The feed/gain ratio of experimental group II was significantly lower than those of control group and experimental group I(P<0.05).(2) The feed gain cost of experimental group II was markedly lower than that of control group(P<0.05), but the gross profit was significantly higher than those of control group and experimental group I(P<0.05).(3) Compared with the control group, the serum total protein content of experimental group II increased markedly( P<0.05) while the urea nitrogen level decreased(P>0.05).[Conclusion] The pelleted total mixed ration with the particle size of 5 mm obtained better fattening ef-fect, and obviously improved the serum total protein level.