This paper has proposed a new modelling and simulating technique for the echo of the semi-active radar seeker against the sea skimming target. The echo modelling is based on the electromagnetic scattering mechanisms. ...This paper has proposed a new modelling and simulating technique for the echo of the semi-active radar seeker against the sea skimming target. The echo modelling is based on the electromagnetic scattering mechanisms. A modified Four-path model based on the radar detection scene is used to describe the multipath scattering between the target and rough sea surface. A Facet-based Small Slope Approximation (FBSSA) method is employed to calculate the scattering from the sea surface. The Physical Optics (PO) and the Equivalent Edge Current (EEC) Method is used to calculate the target scattering. In the echo simulations. The results present the original echo and the echo processed by the signal processing procedures, where the clutter and multipath effect can be observed.展开更多
This paper deals with some aspects of the air entrainment process along the chute of spillway and study of pressure fluctuations. The experimental study has been carried out using stepped spillway model located in the...This paper deals with some aspects of the air entrainment process along the chute of spillway and study of pressure fluctuations. The experimental study has been carried out using stepped spillway model located in the campus of Government College of Engineering, Amravati (India). It is observed that air concentration is increasing with discharge as well as with number of step. Air concentration is increasing along the length of spillway. It is also observed that the bottom mean air concentration increases with step height in the upstream reach of stepped spillway, which is prone to cavitation. The pressure profiles exhibit a wavy pattern down the stepped chute and pressure on each step increases with ratio of critical depth to step height (yc/h).展开更多
In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron fr...In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron from SDSS,meanwhile to apply the remaining slag tailings as cement admixture.From this process,three iron-rich products were recovered in stages by clean gravity-magnetic separation,slag tailings were left.Slag powder was prepared by ultrafine grinding of slag tailings.The stability,setting time and cement mortar strength of the slag tailings cements(STC)which were mixed with Portland cement and slag powder were studied respectively.The results showed that a proper overall performance still could be obtained at the slag powder content of 30%.Chemical composition analysis,X-ray diffraction(XRD)analysis,metallographic microscope and scanning electron microscope(SEM)analysis were employed to assess the characteristics of the SDSS and the products obtained from the whole process.The results indicated that the three iron-rich products could be used as a raw material for steelmaking and ironmaking and the relatively large amount of calcium silicate(C_(2)S)and tricalcium silicate(C_(3)S)in the slag tailings make the addition of slag powder into the Portland cement feasible.展开更多
Celtis is a Cannabaceae genus of 60e70 species of trees,or rarely shrubs,commonly known as hackberries.This woody genus consists of very valuable forest plants that provide important wildlife habitat for birds and mam...Celtis is a Cannabaceae genus of 60e70 species of trees,or rarely shrubs,commonly known as hackberries.This woody genus consists of very valuable forest plants that provide important wildlife habitat for birds and mammals.Although previous studies have identified its phylogenetic position,interspecific relationships within Celtis remain unclear.In this study,we generated genome skimming data from five Celtis species to analyze phylogenetic relationships within the genus and develop genome resources.The plastomes of Celtis ranged in length from 158,989 bp to 159,082 bp,with a typical angiosperm quadripartite structure,and encoded a total of 132 genes with 20 duplicated in the IRs.Comparative analyses showed that plastome content and structure were relatively conserved.Whole plastomes showed no signs of gene loss,translocations,inversions,or genome rearrangement.Six plastid hotspot regions(trnH-psbA,psbA-trnK,trnG-trnR,psbC-trnS,cemA-petA and rps8-rpl14),4097 polymorphic nuclear SSRs,as well as 62 low or single-copy gene fragments were identified within Celtis.Moreover,the phylogenetic relationships based on the complete plastome sequences strongly endorse the placement of C.biondii as sister to the((((C.koraiensis,C.sinensis),C.tetrandra),C.julianae),C.cerasifera)clade.These findings and the genetic resources developed here will be conducive to further studies on the genus Celtis involving phylogeny,population genetics,and conservation biology.展开更多
As a widely used flood energy dissipator, the stepped spillway can significantly dissipate the kinetic or hydraulic energy due to the air-entrainment in skimming flow over the steps. The free-surface aeration involves...As a widely used flood energy dissipator, the stepped spillway can significantly dissipate the kinetic or hydraulic energy due to the air-entrainment in skimming flow over the steps. The free-surface aeration involves the sharp deformation of the free surface and the complex turbulent shear flows. In this study, the volume of fluid （VOF）, mixture, and Eulerian methods are utilized to simulate the air-entrainment by coupling with the Reynolds-averaged Navier-Stokes/large eddy simulation （RANS/LES） turbulence models. The free surface deformation, air volume fraction, pressure, and velocity are compared for the three different numerical methods. Only the Eulerian＋RANS method fails to capture the free-surface aeration. The air volume fraction predicted by the VOF＋LES method best matches the experimental measurement, while the mixture＋LES method predicts the inception point of the air entrainment more accurately.展开更多
This paper illustrates the similarity and dissimilarity between two basic reading skills- skimming and scanning from different ways.It advises readers to understand and make full use of them in their everyday reading....This paper illustrates the similarity and dissimilarity between two basic reading skills- skimming and scanning from different ways.It advises readers to understand and make full use of them in their everyday reading.They will make reading easier and help improve reading comprehension to a certain extent.展开更多
Based on the effects of skim components on ammonium removal as well as the current processing technology, a new process-intensified technology of removing ammonia from skim by air stripping on rotating packed bed was ...Based on the effects of skim components on ammonium removal as well as the current processing technology, a new process-intensified technology of removing ammonia from skim by air stripping on rotating packed bed was proposed. The experiments were conducted on a wave-thread packed Rotating Packed Bed(RPB) under atmospheric pressure, suggesting that, in terms of order of importance, the ammonium concentration of feed-stock(x_w), the average ultra-gravity factor(β), feed-stock flux(L), and gas flux(G) had significant impact on ammonium removal rate(η) and the ammonium concentration of products(x_D). In the experiment, mass-transfer coefficient in gas phase(k_ya_e) increases with the increase of β, G/L, and L. The ammonium concentration of products decreases with the increase of β, G/L and the increase of L. The ammonium concentration of products would be as low as ~0.10% and the ammonia removal rate would be 63.21% when skim temperature was 25 °C, x_w0.28%, β 133.2, and G/L 15.0 m^3·L^(-1). Experiment results indicated that the proposed technology for removing ammonium from skim on a rotating packed bed would be a new process-intensified technique compared with traditional aeration process and centrifugal atomization method.展开更多
文摘This paper has proposed a new modelling and simulating technique for the echo of the semi-active radar seeker against the sea skimming target. The echo modelling is based on the electromagnetic scattering mechanisms. A modified Four-path model based on the radar detection scene is used to describe the multipath scattering between the target and rough sea surface. A Facet-based Small Slope Approximation (FBSSA) method is employed to calculate the scattering from the sea surface. The Physical Optics (PO) and the Equivalent Edge Current (EEC) Method is used to calculate the target scattering. In the echo simulations. The results present the original echo and the echo processed by the signal processing procedures, where the clutter and multipath effect can be observed.
文摘This paper deals with some aspects of the air entrainment process along the chute of spillway and study of pressure fluctuations. The experimental study has been carried out using stepped spillway model located in the campus of Government College of Engineering, Amravati (India). It is observed that air concentration is increasing with discharge as well as with number of step. Air concentration is increasing along the length of spillway. It is also observed that the bottom mean air concentration increases with step height in the upstream reach of stepped spillway, which is prone to cavitation. The pressure profiles exhibit a wavy pattern down the stepped chute and pressure on each step increases with ratio of critical depth to step height (yc/h).
基金The authors gratefully acknowledge the National Key Research and Development Program of China(No.2018YFC1901902)the Liao Ning Revitalization Talents Program(No.XLYC1907162).
文摘In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron from SDSS,meanwhile to apply the remaining slag tailings as cement admixture.From this process,three iron-rich products were recovered in stages by clean gravity-magnetic separation,slag tailings were left.Slag powder was prepared by ultrafine grinding of slag tailings.The stability,setting time and cement mortar strength of the slag tailings cements(STC)which were mixed with Portland cement and slag powder were studied respectively.The results showed that a proper overall performance still could be obtained at the slag powder content of 30%.Chemical composition analysis,X-ray diffraction(XRD)analysis,metallographic microscope and scanning electron microscope(SEM)analysis were employed to assess the characteristics of the SDSS and the products obtained from the whole process.The results indicated that the three iron-rich products could be used as a raw material for steelmaking and ironmaking and the relatively large amount of calcium silicate(C_(2)S)and tricalcium silicate(C_(3)S)in the slag tailings make the addition of slag powder into the Portland cement feasible.
基金supported by the National Natural Science Foundation of China(Grant Nos.31900188,31970225)Natural Science Foundation of Zhejiang Province(Grant No.LY19C030007).
文摘Celtis is a Cannabaceae genus of 60e70 species of trees,or rarely shrubs,commonly known as hackberries.This woody genus consists of very valuable forest plants that provide important wildlife habitat for birds and mammals.Although previous studies have identified its phylogenetic position,interspecific relationships within Celtis remain unclear.In this study,we generated genome skimming data from five Celtis species to analyze phylogenetic relationships within the genus and develop genome resources.The plastomes of Celtis ranged in length from 158,989 bp to 159,082 bp,with a typical angiosperm quadripartite structure,and encoded a total of 132 genes with 20 duplicated in the IRs.Comparative analyses showed that plastome content and structure were relatively conserved.Whole plastomes showed no signs of gene loss,translocations,inversions,or genome rearrangement.Six plastid hotspot regions(trnH-psbA,psbA-trnK,trnG-trnR,psbC-trnS,cemA-petA and rps8-rpl14),4097 polymorphic nuclear SSRs,as well as 62 low or single-copy gene fragments were identified within Celtis.Moreover,the phylogenetic relationships based on the complete plastome sequences strongly endorse the placement of C.biondii as sister to the((((C.koraiensis,C.sinensis),C.tetrandra),C.julianae),C.cerasifera)clade.These findings and the genetic resources developed here will be conducive to further studies on the genus Celtis involving phylogeny,population genetics,and conservation biology.
基金supported by the Guangdong Special Research Fund of Public Welfare and Capacity Building(2015A020216008)the Special Program for Applied Research on Super Computation of the NSFC-Guangdong Joint Fund(the second phase)
文摘As a widely used flood energy dissipator, the stepped spillway can significantly dissipate the kinetic or hydraulic energy due to the air-entrainment in skimming flow over the steps. The free-surface aeration involves the sharp deformation of the free surface and the complex turbulent shear flows. In this study, the volume of fluid （VOF）, mixture, and Eulerian methods are utilized to simulate the air-entrainment by coupling with the Reynolds-averaged Navier-Stokes/large eddy simulation （RANS/LES） turbulence models. The free surface deformation, air volume fraction, pressure, and velocity are compared for the three different numerical methods. Only the Eulerian＋RANS method fails to capture the free-surface aeration. The air volume fraction predicted by the VOF＋LES method best matches the experimental measurement, while the mixture＋LES method predicts the inception point of the air entrainment more accurately.
文摘This paper illustrates the similarity and dissimilarity between two basic reading skills- skimming and scanning from different ways.It advises readers to understand and make full use of them in their everyday reading.They will make reading easier and help improve reading comprehension to a certain extent.
基金Supported by the Opening Project Fund of Key Laboratory of Danzhou Investigation&Experiment Station of Tropical Crops,Ministry of Agriculture(RRI-KLOF201701)
文摘Based on the effects of skim components on ammonium removal as well as the current processing technology, a new process-intensified technology of removing ammonia from skim by air stripping on rotating packed bed was proposed. The experiments were conducted on a wave-thread packed Rotating Packed Bed(RPB) under atmospheric pressure, suggesting that, in terms of order of importance, the ammonium concentration of feed-stock(x_w), the average ultra-gravity factor(β), feed-stock flux(L), and gas flux(G) had significant impact on ammonium removal rate(η) and the ammonium concentration of products(x_D). In the experiment, mass-transfer coefficient in gas phase(k_ya_e) increases with the increase of β, G/L, and L. The ammonium concentration of products decreases with the increase of β, G/L and the increase of L. The ammonium concentration of products would be as low as ~0.10% and the ammonia removal rate would be 63.21% when skim temperature was 25 °C, x_w0.28%, β 133.2, and G/L 15.0 m^3·L^(-1). Experiment results indicated that the proposed technology for removing ammonium from skim on a rotating packed bed would be a new process-intensified technique compared with traditional aeration process and centrifugal atomization method.
