Given their numerous functional and architectural benefits,such as improved bearing capacity and increased resistance to elastic instability modes,cold-formed steel(CFS)built-up sections have become increasingly devel...Given their numerous functional and architectural benefits,such as improved bearing capacity and increased resistance to elastic instability modes,cold-formed steel(CFS)built-up sections have become increasingly developed and used in recent years,particularly in the construction industry.This paper presents an analytical and numerical study of assembled CFS two single channel-shaped columns with different slenderness and configurations(backto-back,face-to-face,and box).These columns were joined by double-row rivets for the back-to-back and box configurations,whereas they were welded together for the face-to-face design.The built-up columns were filled with ordinary concrete of good strength.Finite element models were applied,using ABAQUS software,to assess mechanical performance and study the influence of assembly techniques on the behavior of cold-formed columns under axial compression.Analytical approaches based on Eurocode 3 and Eurocode 4 recommendations for un-filled and concrete-filled columns respectively were followed for the numerical analysis,and concrete confinement effects were also considered per American Concrete Institute(ACI)standards for face-to-face and box configurations.The obtained results indicated a good correlation between the numerical results and the proposed analytical methodology which did not exceed 8%.The failure modes showed that the columns failed due to instabilities such as local and global buckling.展开更多
Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of...Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of the mooring system.In addition,the degrees of large axial tension caused by different elastic moduli are also different,and the force on the mooring line is also different.Therefore,it is of great significance to study the influence of elastic modulus on the dynamic results of the mooring systems under large axial tension.Conventional numerical software fails to consider the axial tension deformation of the mooring.Based on the theory of slender rods,this paper derives the formula for large axial tension using the method of overall coordinates and overall slope coordinates and provides the calculation programs.Considering a polyester mooring system as an example,the calculation program and numerical software are used to calculate and compare the static and dynamic analyses to verify the reliability of the calculation program.To make the force change of the mooring obvious,the elastic moduli of three different orders of magnitude are compared and analyzed,and the dynamic response results after large axial tension are compared.This study concludes that the change in the elastic modulus of the polyester mooring changes the result of the vertex tension by generating an axial tension.The smaller the elastic modulus,the larger the forced oscillation motion amplitude of the top point of the mooring line,the more obvious the axial tension phenomenon,and the smaller the force on the top of the polyester mooring.展开更多
This paper aims to determine the load bearing capacity of pre-stressed expandable props with different geometries and load eccentricities for flexible support in underground mining or excavation.It is deduced that the...This paper aims to determine the load bearing capacity of pre-stressed expandable props with different geometries and load eccentricities for flexible support in underground mining or excavation.It is deduced that the expandable device could have much higher strength(>89 MPa)by laboratory tests,and the load bearing capacity of the expandable prop may depend on the stability of the supporting steel pipe structure.A good agreement was found between the laboratory test and numerical results in terms of the load bearing capacity and the final macro-bending failure pattern for expandable props with heights of 1.5 and 2.7 m,and the theoretical calculation for the strength of traditional steel structures is not directly suitable for the expandable props.Moreover,additional numerical simulations were performed for the expandable props with different normalized slenderness ratiosλ_(n)and loading eccentric distances e.The variation of stability coefficient of the expandable prop is in line with the Perry-Robertson equation and its correlation coefficients are fitted as a of 0.979 and b of 0.314.For estimating the load bearing capacity of the expandable props,the strength equation for traditional steel structures is improved by introducing a bending magnification factor and by modifying the normalized slenderness ratio to a converted slenderness ratio.Based on the underground field monitoring for the strength of expandable props with different heights,the empirical eccentric distances were back calculated,and a safety factor is introduced to obtain the designed strength of the expandable prop.In addition,a four-step design procedure is proposed for the expandable prop.展开更多
Wave slamming is an important phenomenon due to its destructive power,and with the rapid development of offshore wind turbines,wave slamming on vertical cylinders has garnered lots of attention.However,the phenomenon ...Wave slamming is an important phenomenon due to its destructive power,and with the rapid development of offshore wind turbines,wave slamming on vertical cylinders has garnered lots of attention.However,the phenomenon of wave slamming on vertical cylinders is very complicated due to both the intrinsic complexity of breaking waves and that of slamming forces.The objective of this paper is to provide a general review of research related to this problem,including theoretical methods,experimental studies,numerical simulations,and full-scale measurements.Based on these approaches,the momentum theory/pressure impulse theory,spatial distribution characteristics of impacts to various breaking waves,wave generation methods,analysis methods for measured forces under structure response,scale effects in experiments,and in-situ measurements have been introduced and discussed.Results show that simplifications in existing models for wave impacting such as wave characteristics and structural response reduce its applicability and should be studied further both in theoretical,experimental and numerical researches.展开更多
The influence of nose perturbations on the behaviors of asymmetric vortices over a slender body with a three-caliber ogive nose is studied in this paper. The tests of a nose-disturbed slender body with surface pressur...The influence of nose perturbations on the behaviors of asymmetric vortices over a slender body with a three-caliber ogive nose is studied in this paper. The tests of a nose-disturbed slender body with surface pressure measurement were conducted at a low speed wind tunnel with subcritical Reynolds number of 1×105 at angle of attack α=50°. The experiment results show that the behaviors and structure of asymmetric vortices over the slender body are mainly controlled by manual perturbation on the nose of body as compared with geometrical minute irregularities on the test model from the machining tolerances. The effect of the perturbation axial location on asymmetric vortices is the strongest if its location is near the model apex. There are four sensitive circumferential locations of manual perturbation at which bistable vortices over the slender body are switched by the perturbation. The flowfield near the reattachment line of lee side is more sensitive to the perturbation, because the saddle point to saddle point topological structure in this reattachment flowfield is unstable. Various types of perturbation do not change the perturbation effect on the behaviors of bistable asymmetric vortices.展开更多
The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an upda...The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.展开更多
A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the g...A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.展开更多
The in-line (IL) vortex-induced vibration (VIV) that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatur...The in-line (IL) vortex-induced vibration (VIV) that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatures, there is no efficient analytical model for predicting pure IL VIV. In this paper, a wake oscillator model capable of analyzing the IL VIV of slender marine structures has been developed. Two different kinds of van der Pol equations are used to describe the near wake dynamics related to the fluctuating nature of symmetric vortex shedding in the first excitation region and alternate vortex shedding in the second one. Some comparisons are carried out between the present model results and experimental data. It is found that many phenomena observed in experiments could be reproduced by the present wake oscillator model.展开更多
Experimental studies are carried out with slender bodies vertically exiting out of the water using a high-speed camera. The mechanisms for the formation, development, and collapse of the cavity around the slender body...Experimental studies are carried out with slender bodies vertically exiting out of the water using a high-speed camera. The mechanisms for the formation, development, and collapse of the cavity around the slender body are explored. The dynamic characteristics of the shoulder cavity and the trail cavity during the water-exit of low-speed bodies are analyzed for various water depths and initial velocities. The results show that the initial velocity has a great influence on the formation, development, and collapse of the cavity. The length and the thickness of the shoulder cavity vary non-linearly with the depth.展开更多
The investigations of forebody vortex flow and its flow control have great importance in both academic field and engineering application areas. A large number of papers and many review papers have been published. Howe...The investigations of forebody vortex flow and its flow control have great importance in both academic field and engineering application areas. A large number of papers and many review papers have been published. However in this research field of forebody asymmetric vortices, three problems such as tip perturbation effect, Reynolds number effect and flow instability are less studied and thus not understood completely. So many researches are still working on the issues in recent years. The present paper attempts to provide a review of recent research progress on first two problems. The first problem is mainly concerned with how the vortex flow evolves after tip perturbation; how to solve the problem of repeatability and reproducibility of wind tunnel testing data; how to develop a conception of active flow control technique with tip perturbation based on the study of vortex flow response to tip perturbation. For the second problem one is mainly concerned that how the asymmetric vortices are developed with the increase of Reynolds number; how to classify the vortex flow patterns in different Reynolds number regimes; how to develop an appropriate boundary layer transition technique to simulate flows at high Reynolds number in the convention wind tunnels. Finally, some important ques- tions that deserve answers are proposed in the concluding remarks.展开更多
A time domain model is presented to study the vibrations of long slender cylinders placed in shear flow. Long slender cylinders such as risers and tension legs are widely used in the field of ocean engineering. They a...A time domain model is presented to study the vibrations of long slender cylinders placed in shear flow. Long slender cylinders such as risers and tension legs are widely used in the field of ocean engineering. They are subjected to vortex-induced vibrations(VIV) when placed within a transverse incident flow. A three dimensional model coupled with wake oscillators is formulated to describe the response of the slender cylinder in cross-flow and in-line directions. The wake oscillators are distributed along the cylinder and the vortex-shedding frequency is derived from the local current velocity. A non-linear fiuid force model is accounted for the coupled effect between cross-flow and in-line vibrations. The comparisons with the published experimental data show that the dynamic features of VIV of long slender cylinder placed in shear flow can be obtained by the proposed model,such as the spanwise average displacement,vibration frequency,dominant mode and the combination of standing and traveling waves. The simulation in a uniform flow is also conducted and the result is compared with the case of nonuniform flow. It is concluded that the flow shear characteristic has significantly changed the cylinder vibration behavior.展开更多
The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of eq...The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation (linear, quadratic, and exponential) for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density (0.7g cm -3 ). Results from SHAZAM software (version 9) suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture (MOR) and modulus of elasticity (MOE) than did particles with lower slenderness ratios. Edge withdrawal resistance (SWRe) values did not increase with increasing slenderness ratio.展开更多
A new species of gekkonid,Hemiphyllodactylus dupanglingensis sp.nov.,is described based on six specimens from Hunan Province,China.The new species is phylogenetically close to H.zugi,H.hongkongensis,H.dushanensis,and ...A new species of gekkonid,Hemiphyllodactylus dupanglingensis sp.nov.,is described based on six specimens from Hunan Province,China.The new species is phylogenetically close to H.zugi,H.hongkongensis,H.dushanensis,and H.huishuiensis,and can be distinguished from its congeners by the following combination of cha racters:9-11 chin scales;postmental scales enlarged;9-12 infralabials,11-14 supralabials;14-16 dorsal scales and 10-11 ventral scales longitudinally arranged at the midbody contained with one eye diameter;a manual lamellar formula of 4-4-5-4 or 4-5-5-4 and a pedal lamellar formula of 4-5-5-5 or 5-6-6-4;21-25 continuous precloacal and femoral pores in males.展开更多
We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers...We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers, slower right walkers, faster left walkers and slower left walkers are involved in the simulation. The simulation results show that our model can capture some essential features of pedestrian counter flows, such as the lane formation, segregation effect and phase separation at higher densities. We also find that the subconscious effect can reduce the occurrence of jam cluster evidently compared with the ease of un-subeonscious effect. At large maximum velocity, the critical density corresponding to the maximum flow rate of the fundamental diagram is in good agreement with the empirical results.展开更多
How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vib...How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.展开更多
The dynamic calculations of slender marine risers, such as Finite Element Method (FEM) or Modal Expansion Solution Method (MESM), are mainly for the slender structures with their both ends hinged to the surface an...The dynamic calculations of slender marine risers, such as Finite Element Method (FEM) or Modal Expansion Solution Method (MESM), are mainly for the slender structures with their both ends hinged to the surface and bottom. However, for the re-entry operation, risers held by vessels are in vertical free hanging state, so the displacement and velocity of lower joint would not be zero. For the model of free hanging flexible marine risers, the paper proposed a Finite Difference Approximation (FDA) method for its dynamic calculation. The riser is divided into a reasonable number of rigid discrete segments. And the dynamic model is established based on simple Euler-Bemoulli Beam Theory concerning tension, shear forces and bending moments at each node along the cylindrical structures, which is extendible for different boundary conditions. The governing equations with specific boundary conditions for riser's free hanging state are simplified by Keller-box method and solved with Newton iteration algorithm for a stable dynamic solution. The calculation starts when the riser is vertical and still in calm water, and its behavior is obtained along time responding to the lateral forward motion at the top. The dynamic behavior in response to the lateral parametric excitation at the top is also proposed and discussed in this paper.展开更多
Two new species of the genus Anthenoides from the southern China are described. A. laevigatus sp. nov. shows affinities with A. epixanthus. A. tenuis sp. nov. is related to A. cristatus (Sladen).
An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practi...An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practical K∞-exponential stability of the closed-loop system, minimizes a cost functional,which appropriately penalizes both state and control in the sense that it is positive definite(and radially unbounded) in the state and control, without having to solve a Hamilton-Jacobi-Belman equation(HJBE). The Lyapunov functional used in the control design explicitly solves a family of HJBEs. The results are applied to design inverse optimal boundary stabilization control laws for extensible and shearable slender beams governed by fully nonlinear partial differential equations.展开更多
文摘Given their numerous functional and architectural benefits,such as improved bearing capacity and increased resistance to elastic instability modes,cold-formed steel(CFS)built-up sections have become increasingly developed and used in recent years,particularly in the construction industry.This paper presents an analytical and numerical study of assembled CFS two single channel-shaped columns with different slenderness and configurations(backto-back,face-to-face,and box).These columns were joined by double-row rivets for the back-to-back and box configurations,whereas they were welded together for the face-to-face design.The built-up columns were filled with ordinary concrete of good strength.Finite element models were applied,using ABAQUS software,to assess mechanical performance and study the influence of assembly techniques on the behavior of cold-formed columns under axial compression.Analytical approaches based on Eurocode 3 and Eurocode 4 recommendations for un-filled and concrete-filled columns respectively were followed for the numerical analysis,and concrete confinement effects were also considered per American Concrete Institute(ACI)standards for face-to-face and box configurations.The obtained results indicated a good correlation between the numerical results and the proposed analytical methodology which did not exceed 8%.The failure modes showed that the columns failed due to instabilities such as local and global buckling.
基金Supported by the Specialized Research Project for LS17-2 Semi-submersible Production Platform(LSZX-2020-HN-05-0405)the Engineering Development Program of Deepwater Semisubmersible Production Storage and Unloading Platform of China(SSBQ-2020-HN-02-04)。
文摘Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of the mooring system.In addition,the degrees of large axial tension caused by different elastic moduli are also different,and the force on the mooring line is also different.Therefore,it is of great significance to study the influence of elastic modulus on the dynamic results of the mooring systems under large axial tension.Conventional numerical software fails to consider the axial tension deformation of the mooring.Based on the theory of slender rods,this paper derives the formula for large axial tension using the method of overall coordinates and overall slope coordinates and provides the calculation programs.Considering a polyester mooring system as an example,the calculation program and numerical software are used to calculate and compare the static and dynamic analyses to verify the reliability of the calculation program.To make the force change of the mooring obvious,the elastic moduli of three different orders of magnitude are compared and analyzed,and the dynamic response results after large axial tension are compared.This study concludes that the change in the elastic modulus of the polyester mooring changes the result of the vertex tension by generating an axial tension.The smaller the elastic modulus,the larger the forced oscillation motion amplitude of the top point of the mooring line,the more obvious the axial tension phenomenon,and the smaller the force on the top of the polyester mooring.
基金This work was financially supported by the National Key Research and Development Program of China(No.2022YFC2903804)the National Natural Science Foundation of China(Nos.52004054,52274115,51874068 and 52074062).
文摘This paper aims to determine the load bearing capacity of pre-stressed expandable props with different geometries and load eccentricities for flexible support in underground mining or excavation.It is deduced that the expandable device could have much higher strength(>89 MPa)by laboratory tests,and the load bearing capacity of the expandable prop may depend on the stability of the supporting steel pipe structure.A good agreement was found between the laboratory test and numerical results in terms of the load bearing capacity and the final macro-bending failure pattern for expandable props with heights of 1.5 and 2.7 m,and the theoretical calculation for the strength of traditional steel structures is not directly suitable for the expandable props.Moreover,additional numerical simulations were performed for the expandable props with different normalized slenderness ratiosλ_(n)and loading eccentric distances e.The variation of stability coefficient of the expandable prop is in line with the Perry-Robertson equation and its correlation coefficients are fitted as a of 0.979 and b of 0.314.For estimating the load bearing capacity of the expandable props,the strength equation for traditional steel structures is improved by introducing a bending magnification factor and by modifying the normalized slenderness ratio to a converted slenderness ratio.Based on the underground field monitoring for the strength of expandable props with different heights,the empirical eccentric distances were back calculated,and a safety factor is introduced to obtain the designed strength of the expandable prop.In addition,a four-step design procedure is proposed for the expandable prop.
基金the National Natural Science Foundation of China(Grant Nos.51720105010,51979029)the Major Scientific and Technological Project of CNOOC(KJGG2022-0202)Innovative Research Foundation of Ship General Performance(Grant No.31422119).
文摘Wave slamming is an important phenomenon due to its destructive power,and with the rapid development of offshore wind turbines,wave slamming on vertical cylinders has garnered lots of attention.However,the phenomenon of wave slamming on vertical cylinders is very complicated due to both the intrinsic complexity of breaking waves and that of slamming forces.The objective of this paper is to provide a general review of research related to this problem,including theoretical methods,experimental studies,numerical simulations,and full-scale measurements.Based on these approaches,the momentum theory/pressure impulse theory,spatial distribution characteristics of impacts to various breaking waves,wave generation methods,analysis methods for measured forces under structure response,scale effects in experiments,and in-situ measurements have been introduced and discussed.Results show that simplifications in existing models for wave impacting such as wave characteristics and structural response reduce its applicability and should be studied further both in theoretical,experimental and numerical researches.
基金The project supported by the National Natural Science Foundation of China (10172017)the Foundation of National Key Laboratory of Aerodynamic Design and Research (00JS51.3.2 HK01)
文摘The influence of nose perturbations on the behaviors of asymmetric vortices over a slender body with a three-caliber ogive nose is studied in this paper. The tests of a nose-disturbed slender body with surface pressure measurement were conducted at a low speed wind tunnel with subcritical Reynolds number of 1×105 at angle of attack α=50°. The experiment results show that the behaviors and structure of asymmetric vortices over the slender body are mainly controlled by manual perturbation on the nose of body as compared with geometrical minute irregularities on the test model from the machining tolerances. The effect of the perturbation axial location on asymmetric vortices is the strongest if its location is near the model apex. There are four sensitive circumferential locations of manual perturbation at which bistable vortices over the slender body are switched by the perturbation. The flowfield near the reattachment line of lee side is more sensitive to the perturbation, because the saddle point to saddle point topological structure in this reattachment flowfield is unstable. Various types of perturbation do not change the perturbation effect on the behaviors of bistable asymmetric vortices.
基金The project supported by the National Natural Science Foundation of China(10172017)Aeronautical Science Foundation of China(02A51048)Foundation of National Key Laboratory of Aerodynamic Design and Research(51462020504HK0101)
文摘The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant No.201861036)the National Natural Science Foundation of China(Grant No.51279187)+1 种基金the Science and Technology Major Project of Shandong Province(Grant No.2015ZDZX04003)the Key Research and Development Program of Shandong Province(Grant No.2018GHY115045)
文摘A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (SRFDP)(20100032120047)the Independent Innovation Fund of Tianjin University (2010XJ-0098)+2 种基金State Key Laboratory of Ocean Engineering (Shanghai Jiao Tong University) (1104)the National High Technology Research and Development Program of China(863 Program) ( 2012AA051705)the National Natural Science Foundation of China (51209161)
文摘The in-line (IL) vortex-induced vibration (VIV) that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatures, there is no efficient analytical model for predicting pure IL VIV. In this paper, a wake oscillator model capable of analyzing the IL VIV of slender marine structures has been developed. Two different kinds of van der Pol equations are used to describe the near wake dynamics related to the fluctuating nature of symmetric vortex shedding in the first excitation region and alternate vortex shedding in the second one. Some comparisons are carried out between the present model results and experimental data. It is found that many phenomena observed in experiments could be reproduced by the present wake oscillator model.
文摘Experimental studies are carried out with slender bodies vertically exiting out of the water using a high-speed camera. The mechanisms for the formation, development, and collapse of the cavity around the slender body are explored. The dynamic characteristics of the shoulder cavity and the trail cavity during the water-exit of low-speed bodies are analyzed for various water depths and initial velocities. The results show that the initial velocity has a great influence on the formation, development, and collapse of the cavity. The length and the thickness of the shoulder cavity vary non-linearly with the depth.
基金the National Natural Science Foundation of China(10432020 and 10702004)Foundation of Pre-research(9140A13020106HK0111)
文摘The investigations of forebody vortex flow and its flow control have great importance in both academic field and engineering application areas. A large number of papers and many review papers have been published. However in this research field of forebody asymmetric vortices, three problems such as tip perturbation effect, Reynolds number effect and flow instability are less studied and thus not understood completely. So many researches are still working on the issues in recent years. The present paper attempts to provide a review of recent research progress on first two problems. The first problem is mainly concerned with how the vortex flow evolves after tip perturbation; how to solve the problem of repeatability and reproducibility of wind tunnel testing data; how to develop a conception of active flow control technique with tip perturbation based on the study of vortex flow response to tip perturbation. For the second problem one is mainly concerned that how the asymmetric vortices are developed with the increase of Reynolds number; how to classify the vortex flow patterns in different Reynolds number regimes; how to develop an appropriate boundary layer transition technique to simulate flows at high Reynolds number in the convention wind tunnels. Finally, some important ques- tions that deserve answers are proposed in the concluding remarks.
基金supported by the National Natural Science Foundation of China (10532070)the Knowledge Innovation Program of Chinese Academy of Sciences (KJCX2-YW-L07)the LNM Initial Funding for Young Investigators
文摘A time domain model is presented to study the vibrations of long slender cylinders placed in shear flow. Long slender cylinders such as risers and tension legs are widely used in the field of ocean engineering. They are subjected to vortex-induced vibrations(VIV) when placed within a transverse incident flow. A three dimensional model coupled with wake oscillators is formulated to describe the response of the slender cylinder in cross-flow and in-line directions. The wake oscillators are distributed along the cylinder and the vortex-shedding frequency is derived from the local current velocity. A non-linear fiuid force model is accounted for the coupled effect between cross-flow and in-line vibrations. The comparisons with the published experimental data show that the dynamic features of VIV of long slender cylinder placed in shear flow can be obtained by the proposed model,such as the spanwise average displacement,vibration frequency,dominant mode and the combination of standing and traveling waves. The simulation in a uniform flow is also conducted and the result is compared with the case of nonuniform flow. It is concluded that the flow shear characteristic has significantly changed the cylinder vibration behavior.
文摘The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation (linear, quadratic, and exponential) for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density (0.7g cm -3 ). Results from SHAZAM software (version 9) suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture (MOR) and modulus of elasticity (MOE) than did particles with lower slenderness ratios. Edge withdrawal resistance (SWRe) values did not increase with increasing slenderness ratio.
基金supported by the National Natural Science Foundation of China(Grant No.31472021)the Project for Endangered Wildlife Investigation,Supervision and Industry Regulation of the National Forestry and Grassland Bureau of China(No.2019072-HN-001)。
文摘A new species of gekkonid,Hemiphyllodactylus dupanglingensis sp.nov.,is described based on six specimens from Hunan Province,China.The new species is phylogenetically close to H.zugi,H.hongkongensis,H.dushanensis,and H.huishuiensis,and can be distinguished from its congeners by the following combination of cha racters:9-11 chin scales;postmental scales enlarged;9-12 infralabials,11-14 supralabials;14-16 dorsal scales and 10-11 ventral scales longitudinally arranged at the midbody contained with one eye diameter;a manual lamellar formula of 4-4-5-4 or 4-5-5-4 and a pedal lamellar formula of 4-5-5-5 or 5-6-6-4;21-25 continuous precloacal and femoral pores in males.
基金Supported by the National Basic Research Programme of China under Grant No 2006CB705500, the National Natural Science Foundation of China under Grant Nos 10532060 and 10562001, and the Shanghai Leading Academic Discipline Project under Grant No Y0103.
文摘We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers, slower right walkers, faster left walkers and slower left walkers are involved in the simulation. The simulation results show that our model can capture some essential features of pedestrian counter flows, such as the lane formation, segregation effect and phase separation at higher densities. We also find that the subconscious effect can reduce the occurrence of jam cluster evidently compared with the ease of un-subeonscious effect. At large maximum velocity, the critical density corresponding to the maximum flow rate of the fundamental diagram is in good agreement with the empirical results.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51679167 and 51525803)
文摘How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.
基金supported and sponsored jointly by the National Natural Science Foundation of China(Grand Nos.51009092 and 50909061)Doctoral Foundation of the Ministry of Education of China(Grand No.20090073120013)the National High Technology Research and Development Program of China(863Program,Grand No.2008AA092301-1)
文摘The dynamic calculations of slender marine risers, such as Finite Element Method (FEM) or Modal Expansion Solution Method (MESM), are mainly for the slender structures with their both ends hinged to the surface and bottom. However, for the re-entry operation, risers held by vessels are in vertical free hanging state, so the displacement and velocity of lower joint would not be zero. For the model of free hanging flexible marine risers, the paper proposed a Finite Difference Approximation (FDA) method for its dynamic calculation. The riser is divided into a reasonable number of rigid discrete segments. And the dynamic model is established based on simple Euler-Bemoulli Beam Theory concerning tension, shear forces and bending moments at each node along the cylindrical structures, which is extendible for different boundary conditions. The governing equations with specific boundary conditions for riser's free hanging state are simplified by Keller-box method and solved with Newton iteration algorithm for a stable dynamic solution. The calculation starts when the riser is vertical and still in calm water, and its behavior is obtained along time responding to the lateral forward motion at the top. The dynamic behavior in response to the lateral parametric excitation at the top is also proposed and discussed in this paper.
文摘Two new species of the genus Anthenoides from the southern China are described. A. laevigatus sp. nov. shows affinities with A. epixanthus. A. tenuis sp. nov. is related to A. cristatus (Sladen).
文摘An optimal(practical) stabilization problem is formulated in an inverse approach and solved for nonlinear evolution systems in Hilbert spaces. The optimal control design ensures global well-posedness and global practical K∞-exponential stability of the closed-loop system, minimizes a cost functional,which appropriately penalizes both state and control in the sense that it is positive definite(and radially unbounded) in the state and control, without having to solve a Hamilton-Jacobi-Belman equation(HJBE). The Lyapunov functional used in the control design explicitly solves a family of HJBEs. The results are applied to design inverse optimal boundary stabilization control laws for extensible and shearable slender beams governed by fully nonlinear partial differential equations.