Sliding-mode-based preassigned-time control of a class of memristor chaotic systems

This paper addresses the preassigned-time chaos control problem of memristor chaotic systems with time delays.Since the introduction of memristor,the presented models are nonlinear systems with chaotic dynamics.First,the TS fuzzy method is adopted to describe the chaotic systems.Then,a sliding-model-based control approach is proposed to achieve the preassigned-time stabilization of the presented models,where the upper bound of stabilization time can be arbitrarily specified in advance.Finally,simulation results demonstrate the validity of presented control approach and theoretic results.

Practical bipartite consensus for multi-agent systems:A barrier function-based adaptive sliding-mode control approach

This paper is concerned with bipartite consensus tracking for multi-agent systems with unknown disturbances.A barrier function-based adaptive sliding-mode control(SMC)approach is proposed such that the bipartite steady-state error is converged to a predefined region of zero in finite time.Specifically,based on an error auxiliary taking neighboring antagonistic interactions into account,an SMC law is designed with an adaptive gain.The gain can switch to a positive semi-definite barrier function to ensure that the error auxiliary is constrained to a predefined neighborhood of zero,which in turn guarantees practical bipartite consensus tracking.A distinguished feature of the proposed controller is its independence on the bound of disturbances,while the input chattering phenomenon is alleviated.Finally,a numerical example is provided to verify the effectiveness of the proposed controller.

SLIDING-MODE CONTROL OF UNOERTAINTY BILINEAR SYSTEM

In this paper,the sliding-mode control of a bilinear system is studied. It improves the dynamicresponse of the closedweloop system around the original point and is rather robust to the bounded disturbance. At last,the model of an ammonia synthesis reactor is adopted to illustrate the phenomenon described.

Distributed Secondary Control of AC Microgrids With External Disturbances and Directed Communication Topologies:A Full-Order Sliding-Mode Approach

This paper addresses the problem of distributed secondary control for islanded AC microgrids with external disturbances.By using a full-order sliding-mode(FOSM)approach,voltage regulation and frequency restoration are achieved in finite time.For voltage regulation,a distributed observer is proposed for each distributed generator(DG)to estimate a reference voltage level.Different from some conventional observers,the reference voltage level in this paper is accurately estimated under directed communication topologies.Based on the observer,a new nonlinear controller is designed in a backstepping manner such that an FOSM surface is reached in finite time.On the surface,the voltages of DGs are regulated to the reference level in finite time.For frequency restoration,a distributed controller is further proposed such that a constructed FOSM surface is reached in finite time,on which the frequencies of DGs are restored to a reference level in finite time under directed communication topologies.Finally,case studies on a modified IEEE 37-bus test system are conducted to demonstrate the effectiveness,the robustness against load changes,and the plug-and-play capability of the proposed controllers.

Adaptive sliding-mode path following control system of the underactuated USV under the influence of ocean currents

The path-following control of the asymmetry underactuated unmanned surface vehicle(USV) under external disturbances such as unknown constant and irrational ocean currents is discussed, and an adaptive sliding-mode path-following control system is proposed, which comprises a path-variable updated law,a modified integral line-of-sight(ILOS) guidance law based on a time-varying lookahead distance and adaptive feedback linearizing controllers combined with sliding-mode technique. A more accurate USV model without the assumption of having diagonal inertia and damping matrices is first presented, aiming at improving the performance of the path-following control. Next, the coordinate transformation is adopted to decouple the sway dynamic from the rudder angle, and the path-following errors dynamics without non-singular problem are presented in the moving Frenet-Serret frame. Then, based on the cascaded theorem and the adaptive sliding-mode method, the adaptive control law of position errors and course error are designed, among which the lookahead distance and integral gain are all computed as different functions of cross-track error to estimate and compensate the sideslip angle caused by external disturbances adaptively. Finally, according to the Lyapunov and cascaded theorem, the control system proposed is proved to be uniform globally asymptotic stability(UGAS) and uniform semiglobal exponential stability(USGES) when the control objectives are all achieved. Simulation results illustrate the precision and high-quality performance of this new controller.

Adaptive Sliding-Mode Control of an Automotive Electronic Throttle in the Presence of Input Saturation Constraint

In modern vehicles, electronic throttle(ET) has been widely utilized to control the airflow into gasoline engine. To solve the control difficulties with an ET, such as strong nonlinearity,unknown model parameters and input saturation constraints,an adaptive sliding-mode tracking control strategy for an ET is presented. Compared with the existing control strategies for an ET, input saturation constraints and parameter uncertainties are adequately considered in the proposed control strategy. At first, the nonlinear dynamic model for control of an ET is described. According to the dynamical model, the nonlinear adaptive sliding-mode tracking control method is presented,where parameter adaptive laws and auxiliary design system are employed. Parameter adaptive law is given to estimate the unknown parameter with an ET. An auxiliary system is designed,and its state is utilized in the tracking control method to handle the input saturation. Stability proof and analysis of the adaptive sliding-mode control method is performed by using Lyapunov stability theory. Finally, the reliability and feasibility of the proposed control strategy are evaluated by computer simulation.Simulation research shows that the proposed sliding-mode control strategy can provide good control performance for an ET.

Vision-based Stabilization of Nonholonomic Mobile Robots by Integrating Sliding-mode Control and Adaptive Approach

Vision-based pose stabilization of nonholonomic mobile robots has received extensive attention. At present, most of the solutions of the problem do not take the robot dynamics into account in the controller design, so that these controllers are difficult to realize satisfactory control in practical application. Besides, many of the approaches suffer from the initial speed and torque jump which are not practical in the real world. Considering the kinematics and dynamics, a two-stage visual controller for solving the stabilization problem of a mobile robot is presented, applying the integration of adaptive control, sliding-mode control, and neural dynamics. In the first stage, an adaptive kinematic stabilization controller utilized to generate the command of velocity is developed based on Lyapunov theory. In the second stage, adopting the sliding-mode control approach, a dynamic controller with a variable speed function used to reduce the chattering is designed, which is utilized to generate the command of torque to make the actual velocity of the mobile robot asymptotically reach the desired velocity. Furthermore, to handle the speed and torque jump problems, the neural dynamics model is integrated into the above mentioned controllers. The stability of the proposed control system is analyzed by using Lyapunov theory. Finally, the simulation of the control law is implemented in perturbed case, and the results show that the control scheme can solve the stabilization problem effectively. The proposed control law can solve the speed and torque jump problems, overcome external disturbances, and provide a new solution for the vision-based stabilization of the mobile robot.

Robust Modeling, Sliding-Mode Controller, and Simulation of an Underactuated ROV Under Parametric Uncertainties and Disturbances

A dynamic model of a remotely operated vehicle(ROV)is developed.The hydrodynamic damping coefficients are estimated using a semi-predictive approach and computational fluid dynamic software ANSYS-CFX?and WAMIT?.A sliding-mode controller(SMC)is then designed for the ROV model.The controller is subsequently robustified against modeling uncertainties,disturbances,and measurement errors.It is shown that when the system is subjected to bounded uncertainties,the SMC will preserve stability and tracking response.The paper ends with simulation results for a variety of conditions such as disturbances and parametric uncertainties.

Sliding-mode observers for systems with unknown inputs and measurement disturbances

The method to design sliding-mode observers for systems with unknown inputs and measurement disturbances is presented in the paper. An augmented system is constructed by viewing the measurement disturbances as unknow inputs. For such an augmented system, the so-called observer matching condition is not satisfied. Based on the construction of auxiliary outputs, the observer matching condition may be satisfied. High-order sliding-mode differentiators are developed to obtain the estimates of those unmeasurable variables contained in the auxiliary output vector. Employing the estimate of auxiliary output vector, a sliding-mode observer is designed. The simulation results to a real model show that the proposed method is effective.

Sliding-mode control for a rolling-missile with input constraints

This paper investigates the overload stabilization problem of the rolling-missile subject to parameters uncertainty and actuator saturation. In order to solve this problem, a sliding-mode control(SMC) scheme is technically employed by using the backstepping approach to make the dynamic system stable. In addition,SMC with the tanh-type switching function plays an important role in reducing intrinsic vibration. Furthermore, an auxiliary system(AS) is developed to compensate for nonlinear terms arising from input saturation. Finally, the simulation results provide a solution to demonstrate that the suggested SMC and the AS methodology have advantages of strong tracking capability, anti-interference ability and anti-saturation performance.

Design of novel sliding-mode controller for high-velocity AUV with consideration of residual dead load

This work focuses on motion control of high-velocity autonomous underwater vehicle(AUV).Conventional methods are effective solutions to motion control of low-and-medium-velocity AUV.Usually not taken into consideration in the control model,the residual dead load and damping force which vary with the AUV’s velocity tend to result in difficulties in motion control or even failure in convergence in the case of high-velocity movement.With full consideration given to the influence of residual dead load and changing damping force upon AUV motion control,a novel sliding-mode controller(SMC)is proposed in this work.The stability analysis of the proposed controller is carried out on the basis of Lyapunov function.The sea trials results proved the superiority of the sliding-mode controller over sigmoid-function-based controller(SFC).The novel controller demonstrated its effectiveness by achieving admirable control results in the case of high-velocity movement.

Sliding-mode control of path following for underactuated ships based on high gain observer

A nonlinear robust control strategy is proposed to force an underactuated surface ship to follow a predefined path with uncertain environmental disturbance and parameters.In the controller design,a high-gain observer is used to estimate velocities,thus only position and yaw angle measurements are required.The control problem of underactuated system is transformed into a control of fully actuated system through adopting an improved line-of-sight(LOS) guidance law.A sliding-mode controller is designed to eliminate the yaw angle error,and provide the control system robustness.The control law is proved semi-globally exponentially stable(SGES) by applying Lyapunov stability theory,and numerical simulation using real data of a monohull ship illustrates the effectiveness and robustness of the proposed methodology.

Fractional-Order Super-Twisting Sliding-Mode Procedure Design for a Class of Fractional-Order Nonlinear Dynamic Underwater Robots

The purpose of this study is to design a fractional-order super-twisting sliding-mode controller for a class of nonlinear fractionalorder systems.The proposed method has the following advantages:(1)Lyapunov stability of the overall closed-loop system,(2)output tracking error’s convergence to zero,(3)robustness against external uncertainties and disturbances,and(4)reduction of the chattering phenomenon.To investigate the performance of the method,the proposed controller is applied to an autonomous underwater robot and Lorenz chaotic system.Finally,a simulation is performed to verify the potential of the proposed method.

A New Approach to Extensible Continuum Robot Control Using the Sliding-Mode

In this paper, the authors present a new control strategy for continuous backbone （continuum） ＂trunk and tentacle＂ robots. Control of this emerging new class of robots has proved difficult due to the inherent complexity of their dynamics. Using a recently established full dynamic model, the authors introduce a new nonlinear model-based control strategy for continuum robots. The approach is applicable to continuum robots which can extend/contract as well as bend throughout their structure. Results are illustrated using the mathematical model of a three-section, six-degree of freedom planar continuum robot.

Sliding-Mode Control Based on Index control Law for MPPT in Photovoltaic Systems

A novel maximum power point tracking method based on sliding mode control and average state model of PV generation systems is developed.This method consists of two parts:term of constant control and term of index control.It is different from the conventional sliding mode control which uses a constant speed control law.The developed method uses a controllable sliding mode switching function which can automatically adjust the approaching speed,so as to enable the photovoltaic system to achieve fast dynamic response and stable output power.System simulations using MATLAB are performed.Compared with conventional methods,simulation results show that maximum power point tracking times for the novel method both in start-up phase and in cases of environmental changes can be shorten by more than 50%.A experimental platform of 150W PV system has been established to conduct tests.Experimental results show that the maximum power point tracking times both in start-up phase and in load stepping phase including the illumination change phase,can be significantly decreased.These results indicate that the developed method owns better dynamic response than constant speed control law.It can be used in photovoltaic generation system.

A Novel Sliding-mode Guidance Law Based on Lie-group Method

Although the channel-decoupling assumption is often used in design of three-dimensional guidance laws, it loses its rationality for aircrafts with strong kinematics coupling because body rotation arises. To overcome this trouble, a novel guiding method was proposed based on Lie-group. After a model of 3D guidance is formulated using vectors, the precision guidance with ending angular constraints can be transformed into a problem involving the relation between directional angles and rotational angular velocities of certain vectors. When the guidance model is imposed a SO(3)-based description, a novel 3D sliding mode guidance law with ending angular constraints can be developed via Lie-group control method and variable structure control theory. Finally, the feasibility and performance of the guidance law were shown by simulating the examples.

Robust fuzzy sliding-mode control for T-S model based permanent magnet synchronous motor

A fuzzy sliding-mode control (FSMC) scheme based on T-S fuzzy models was proposed for the permanent magnet synchronous motor (PMSM) drive system to solve the speed tracking problem. A T-S fuzzy model was firstly formed to represent the nonlinear system of PMSM. For converting the tracking control into a stabilization problem, a new control design was proposed to define the internal desired states. Then, the FSMC controller for PMSM system with parameter variation and load disturbance was designed based on the fuzzy model. The performance of the proposed controller was verified by experimental results on PMSM system. The results show that the FSMC scheme can drive the dynamics of PMSM into a designated sliding surface in finite time and guarantee the property of asymptotical stability. The information of upper bound of modeling errors as well as perturbations is not required when using the FSMC controller.

Improved sliding-mode control for tracking global maximum power of triple-series-parallel ladder photovoltaic arrays under uneven shadowing

This paper presents an innovative way to enhance the performance of photovoltaic(PV)arrays under uneven shadowing conditions.The study focuses on a triple-series–parallel ladder configuration to exploit the benefits of increased power generation while ad-dressing the challenges associated with uneven shadowing.The proposed methodology focuses on the implementation of improved sliding-mode control technique for efficient global maximum power point tracking.Sliding-mode control is known for its robustness in the presence of uncertainties and disturbances,making it suitable for dynamic and complex systems such as PV arrays.This work employs a comprehensive simulation framework to comment on the performance of the suggested improved sliding-mode control strategy in uneven shadowing scenarios.Comparative analysis has been done to show the better effectiveness of the suggested method than the traditional control strategies.The results demonstrate a remarkable enhancement in the tracking accuracy of the global maximum power point,leading to enhanced energy-harvesting capabilities under challenging environmental conditions.Furthermore,the proposed approach exhibits robustness and adaptability in mitigating the effect of shading on the PV array,thereby increasing overall system efficiency.This research contributes valuable insights into the development of advanced control strategies for PV arrays,particularly in the context of triple-series–parallel ladder configurations operating under uneven shadowing conditions.Under short narrow shading conditions,the improved sliding-mode control method tracks the maximum power better compared with perturb&observe at 20.68%,incremental-conductance at 68.78%,fuzzy incremental-conductance at 19.8%,and constant-velocity sliding-mode control at 1.25%.The improved sliding-mode control method has 60%less chattering than constant-velocity sliding-mode control under shading conditions.

Sliding-mode Observer-based Grid Voltage-observation Method with Frequency-fixed Dual SOGI and Cross-compensated Phase-locked Loop

Conventional sliding-mode observer(SMO)-based grid-voltage observation methods often require a low-pass filter(LPF)to remove high-frequency sliding-mode noise.However,a complicated phase-and amplitude-compensation method,which is highly sensitive to the DC-offset,is required.A frequency-adaptive dual second-order generalized integrator(SOGI)can be used to replace the LPF,eliminating the compensation link and the effects of the DC-offset;however,strong coupling is introduced between the front-end SOGI block and back-end phase-locked loop(PLL)block,thereby reducing the dynamic performance.To solve this problem,this study proposes an SMO-based grid-voltage observation method with a frequency-fixed dual SOGI and cross-compensated PLL that can eliminate the frequency coupling between the front-end SOGI block and back-end PLL blocks,thereby increasing its dynamic performance.In this study,the phase and amplitude are compensated simultaneously using the proposed cross-compensation method,achieving an accurate observation of the grid voltage under off-nominal frequencies.An analysis of the small-signal model theoretically verified that the proposed method has good dynamic performance.Finally,the superiority of the proposed method is verified through comparative experiments.

脱模机转动系统极点配置控制器设计

为了提高混凝土试块脱模质量,研发了一款全新的全自动化实验设备-混凝土试块脱模机,为了提高脱模机的工作效率和质量,以脱模机转动系统为例,提高其脱模机转动系统的角度控制。该文基于极点配置理论设计了一种脱模机转动控制器,并通过仿真实验验证其有效性。结果显示,在6 s的时间内系统可以达到稳定状态。该文采用了遗传算法优化加权系数,通过实验仿真,将系统稳定时间缩短到0.5 s。研究结果表明,采用基于极点配置控制理论的脱模机转动控制器,结合遗传算法进行优化,可以提高脱模机转动系统的角度控制,缩短稳定时间,提高设备运行效率。