Slurry pipeline transport is widely used in several industrial processes.Calculating the specific power consumption(SPC)and determining the best working conditions are important for the design and operation of transpo...Slurry pipeline transport is widely used in several industrial processes.Calculating the specific power consumption(SPC)and determining the best working conditions are important for the design and operation of transportation systems.Based on the Shanghai Jiao Tong University high-concentration multi-sized slurry pressure drop(SJTU-HMSPD)pipeline-resistance-calculation model,the SJTU-SPC model for calculating the power required to transport a unit volume of solid materials over a unit pipeline length is established for a slurry transport system.The said system demonstrates a uniformity coefficient in the 1.26–7.98 range,median particle size of 0.075–4 mm,particle volume concentration of 10–60%,and pipeline diameter of 0.203–0.8 m.The results obtained were successfully verified against existing experimental data.The influence of parameters,such as particle-gradation uniformity coefficient,median particle size,pipe diameter,and particle volume concentration,on the SPC were analysed.The results revealed that the greater is the uniformity coefficient,the smaller is the minimum specific energy consumption and the larger the optimal transport concentration for a constant,median particle size slurry.As observed,the optimal transport concentration for broad-graded sand equalled approximately 48%.These results supplement the conclusions of existing research,indicating that the optimal transport concentration is approximately 30%and provides theoretical support for high concentration transportation of broad graded slurry.展开更多
基金This research was supported by the National Natural Science Foundation of China(Grant No.51779143)the Cultivation of Scientific Research Ability of Young Talents of Shanghai jiao Tong University(Grant No.19×100040072).
文摘Slurry pipeline transport is widely used in several industrial processes.Calculating the specific power consumption(SPC)and determining the best working conditions are important for the design and operation of transportation systems.Based on the Shanghai Jiao Tong University high-concentration multi-sized slurry pressure drop(SJTU-HMSPD)pipeline-resistance-calculation model,the SJTU-SPC model for calculating the power required to transport a unit volume of solid materials over a unit pipeline length is established for a slurry transport system.The said system demonstrates a uniformity coefficient in the 1.26–7.98 range,median particle size of 0.075–4 mm,particle volume concentration of 10–60%,and pipeline diameter of 0.203–0.8 m.The results obtained were successfully verified against existing experimental data.The influence of parameters,such as particle-gradation uniformity coefficient,median particle size,pipe diameter,and particle volume concentration,on the SPC were analysed.The results revealed that the greater is the uniformity coefficient,the smaller is the minimum specific energy consumption and the larger the optimal transport concentration for a constant,median particle size slurry.As observed,the optimal transport concentration for broad-graded sand equalled approximately 48%.These results supplement the conclusions of existing research,indicating that the optimal transport concentration is approximately 30%and provides theoretical support for high concentration transportation of broad graded slurry.
