Research on aiming methods for small sample size shooting tests of two-dimensional trajectory correction fuse

The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.

Metal Corrosion Rate Prediction of Small Samples Using an Ensemble Technique

Accurate prediction of the internal corrosion rates of oil and gas pipelines could be an effective way to prevent pipeline leaks.In this study,a proposed framework for predicting corrosion rates under a small sample of metal corrosion data in the laboratory was developed to provide a new perspective on how to solve the problem of pipeline corrosion under the condition of insufficient real samples.This approach employed the bagging algorithm to construct a strong learner by integrating several KNN learners.A total of 99 data were collected and split into training and test set with a 9:1 ratio.The training set was used to obtain the best hyperparameters by 10-fold cross-validation and grid search,and the test set was used to determine the performance of the model.The results showed that theMean Absolute Error(MAE)of this framework is 28.06%of the traditional model and outperforms other ensemblemethods.Therefore,the proposed framework is suitable formetal corrosion prediction under small sample conditions.

Reliability Assessment for the Solenoid Valve of a High-Speed Train Braking System under Small Sample Size

Reliability assessment of the braking system in a high?speed train under small sample size and zero?failure data is veryimportant for safe operation. Traditional reliability assessment methods are only performed well under conditions of large sample size and complete failure data,which lead to large deviation under conditions of small sample size and zero?failure data. To improve this problem,a new Bayesian method is proposed. Based on the characteristics of the solenoid valve in the braking system of a high?speed train,the modified Weibull distribution is selected to describe the failure rate over the entire lifetime. Based on the assumption of a binomial distribution for the failure probability at censored time,a concave method is employed to obtain the relationships between accumulation failure prob?abilities. A numerical simulation is performed to compare the results of the proposed method with those obtained from maximum likelihood estimation,and to illustrate that the proposed Bayesian model exhibits a better accuracy for the expectation value when the sample size is less than 12. Finally,the robustness of the model is demonstrated by obtaining the reliability indicators for a numerical case involving the solenoid valve of the braking system,which shows that the change in the reliability and failure rate among the di erent hyperparameters is small. The method is provided to avoid misleading of subjective information and improve accuracy of reliability assessment under condi?tions of small sample size and zero?failure data.

LOCAL BAGGING AND ITS APPLICATIONON FACE RECOGNITION

Bagging is not quite suitable for stable classifiers such as nearest neighbor classifiers due to the lack of diversity and it is difficult to be directly applied to face recognition as well due to the small sample size （SSS） property of face recognition. To solve the two problems,local Bagging （L-Bagging） is proposed to simultaneously make Bagging apply to both nearest neighbor classifiers and face recognition. The major difference between L-Bagging and Bagging is that L-Bagging performs the bootstrap sampling on each local region partitioned from the original face image rather than the whole face image. Since the dimensionality of local region is usually far less than the number of samples and the component classifiers are constructed just in different local regions,L-Bagging deals with SSS problem and generates more diverse component classifiers. Experimental results on four standard face image databases （AR,Yale,ORL and Yale B） indicate that the proposed L-Bagging method is effective and robust to illumination,occlusion and slight pose variation.

A novel face recognition method with feature combination

A novel combined personalized feature framework is proposed for face recognition (FR). In the framework, the proposed linear discriminant analysis (LDA) makes use of the null space of the within-class scatter matrix effectively, and Global feature vectors (PCA-transformed) and local feature vectors (Gabor wavelet-transformed) are integrated by complex vectors as input feature of improved LDA. The proposed method is compared to other commonly used FR methods on two face databases (ORL and UMIST). Results demonstrated that the performance of the proposed method is superior to that of traditional FR ap- proaches

Reliability Assessment Method Based on Interference Variable for Stress-Strength Model

Stress-strength model is a basic and important tool for reliability analysis.There are few methods to assess the confidence limit of interference reliability when the distribution parameters of stress and strength are all unknown.A new assessment method of interference reliability is proposed and the estimates of the distribution parameters are accordingly given.The lower confidence limit of interference reliability with given confidence can be obtained with the method even though the parameters are all unknown.Simulation studies and an engineering application are conducted to validate the method,which suggest that the method provides precise estimates even for sample size of approximately.

Hybrid Method Based on Information Gain and Support Vector Machine for Gene Selection in Cancer Classi?cation

It remains a great challenge to achieve sufficient cancer classification accuracy with the entire set of genes, due to the high dimensions, small sample size, and big noise of gene expression data. We thus proposed a hybrid gene selection method, Information Gain-Support Vector Machine （IG-SVM） in this study. IG was initially employed to filter irrelevant and redundant genes. Then, further removal of redundant genes was performed using SVM to eliminate the noise in the datasets more effectively. Finally, the informative genes selected by IG-SVM served as the input for the LIBSVM classifier. Compared to other related algorithms, IG-SVM showed the highest classification accuracy and superior performance as evaluated using five cancer gene expression datasets based on a few selected genes. As an example, IG-SVM achieved a classification accuracy of 90.32% for colon cancer, which is difficult to be accurately classified, only based on three genes including CSRP1, MYLg, and GUCA2B.