An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine t...An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine the gain and loss of a laboratory CW Nd：YAG laser by using the Findlay-Clay approach. The ARR arm is then experimentally arranged inside the cavity of an arranged high power side-pumped CW Nd：YAG laser. A coated beam splitter with 50–50% re？ectivity at normal incidence is placed inside the cavity to provide a wide range of re？ectivity from 0 to 100%. This is performed by a rotatable stage and tilting the beam splitter by 10？ with the steps of 0.05. By changing the input electrical power of the laser pump the variation of the output laser power is monitored for 20 individual re？ectivity of ARR arm. Average pump threshold power of about 180 W is obtained. With the help of the derived equations and obtained threshold power, small signal gain and loss associated with the emerging beam is estimated. It is verified that the former is very dependent to the input parameters. Laser efficiency is also measures 5.6% which is quite comparable with the reported values.展开更多
This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the...This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.展开更多
An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate...An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate that the majority of transitions in discharge have anomalous gain coefficients under RF-discharge condition. This fact has not been generally recognized and the neglect of overlapping transitions can lead to errors in determining rotational temperature.展开更多
对Nd,Y:CaF_2晶体作为激光放大器的增益介质进行了报道.研制了一台采用激光二极管面阵五向水平侧面抽运Ф5 mm×70 mm Nd,Y:CaF_2的激光放大器,对其进行了实验研究.测量了Nd,Y:CaF_2晶体的吸收谱、发射谱、以及放大器的荧光分布.在...对Nd,Y:CaF_2晶体作为激光放大器的增益介质进行了报道.研制了一台采用激光二极管面阵五向水平侧面抽运Ф5 mm×70 mm Nd,Y:CaF_2的激光放大器,对其进行了实验研究.测量了Nd,Y:CaF_2晶体的吸收谱、发射谱、以及放大器的荧光分布.在相同的抽运功率下,测量了Nd,Y:CaF_2与Nd:Glass放大器分别工作在10 Hz和1 Hz重复频率时的小信号增益,在抽运功率为9.63 kW时,Nd,Y:CaF_2放大器的小信号增益达6.12,为Nd:Glass的1.5倍.与Nd:Glass相比,Nd,Y:CaF_2晶体的重复工作频率不仅大大提高,而且增益性能也更强.测量了种子光和经Nd,Y:CaF_2放大器后的光谱,能量放大前后光谱几乎无变化.展开更多
文摘An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine the gain and loss of a laboratory CW Nd：YAG laser by using the Findlay-Clay approach. The ARR arm is then experimentally arranged inside the cavity of an arranged high power side-pumped CW Nd：YAG laser. A coated beam splitter with 50–50% re？ectivity at normal incidence is placed inside the cavity to provide a wide range of re？ectivity from 0 to 100%. This is performed by a rotatable stage and tilting the beam splitter by 10？ with the steps of 0.05. By changing the input electrical power of the laser pump the variation of the output laser power is monitored for 20 individual re？ectivity of ARR arm. Average pump threshold power of about 180 W is obtained. With the help of the derived equations and obtained threshold power, small signal gain and loss associated with the emerging beam is estimated. It is verified that the former is very dependent to the input parameters. Laser efficiency is also measures 5.6% which is quite comparable with the reported values.
基金Project supported in part by the National Natural Science Foundation of China (Grant No 60532010)the Talent Fund of Chinese Education Administration
文摘This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.
文摘An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate that the majority of transitions in discharge have anomalous gain coefficients under RF-discharge condition. This fact has not been generally recognized and the neglect of overlapping transitions can lead to errors in determining rotational temperature.
