Analysis and Innovative Strategies of Tax Preferential Policies to Promote the Sustainable Development of Small-Scale Individual Businesses

This study conducted an in-depth analysis of the current tax preferential policies for small-scale individual businesses and compared them with similar policies both domestically and internationally,aiming to reveal the advantages and disadvantages of the current system.After examining the impact of these tax preferential policies on the economic status of individual business owners and the broader social economy,this article proposes a set of innovative tax preferential strategies based on theoretical foundations.By developing these innovative strategies and clarifying their implementation paths,the aim is to promote the sustainable and healthy development of small-scale individual businesses,thereby fostering comprehensive socio-economic progress.The conclusion of this study not only summarizes policy recommendations with practical significance but also provides theoretical support for the optimization and innovation of future related systems.

Research and Simulation on the Small-scale Streaming Data Transmission Communication System based on ARM and FPGA

In this paper, we conduct theoretical research on small-scale streaming data transmission communication system based on ARM and FPGA. Compared with network layer IP multicast, it does not need to change the underlying structure of the network with the realization. Aa are day by day mature as a result of the embedded technical high speed development and the GPRS technology with use the embedded system essence small, special-purpose strong, the system simplification and the GPRS network cover characteristics and so on whole world. Under this basis, this paper proposes the new ARM and FPGA based small-scale streaming data transmission communication system. The implementation of the system proves its effectiveness.

Searching scheme in P2P system based on semantic overlay network

In consideration of the limitation of super-peer overlay network, the semantic information was introduced into the super-peers＇ organization. A novel P2P （peer-to-peer） searching model, SSP2P, was put forward. The peers in the model were organized in a natural area autonomy system （AAS） based on the smallworld theory. A super-peer was selected in each AAS based on power law; and all the super-peers formed different super-peer semantic networks. Thus, a hierarchical super-peer overlay network was formed. The results show that the model reduces the communication cost and enhances the search efficiency while ensuring the system expansibility. It proves that the introduction of semantic information in the construction of a super-peer overlay is favorable to P2P system capability.

Semantic overlay network for searching taxonomy-based data sources

Distributed data sources which employ taxonomy hierarchy to describe the contents of their objects are considered, and a super-peer-based semantic overlay network （SSON） is proposed for sharing and searching their data objects. In SSON, peers are dynamically clustered into many semantic clusters based on the semantics of their data objects and organized in the semantic clusters into a semantic overlay network. Each semantic cluster consists of a super-peer and more peers, and is only responsible for answering queries in its semantic subspace. A query is first routed to the appropriate semantic clusters by an efficient searching algorithm, and then it is forwarded to the specific peers that hold the relevant data objects. Experimental results indicate that SSON has good scalability and achieves a competitive trade-off between search efficiency and costs.

Optimal shape space and searching in the active shape model

A novel idea,called the optimal shape subspace （OSS） is first proposed for optimizing active shape model （ASM） search.It is constructed from the principal shape subspace and the principal shape variance subspace.It allows the reconstructed shape to vary more than that reconstructed in the standard ASM shape space,hence it is more expressive in representing shapes in real life.Then a cost function is developed,based on a study on the search process.An optimal searching method using the feedback information provided by the evaluation cost is proposed to improve the performance of ASM alignment.Experimental results show that the proposed OSS can offer the maximum shape variation with reserving the principal information and a unique local optimal shape is acquired after optimal searching.The combination of OSS and optimal searching can improve the ASM performance greatly.

Parameter optimization of gravity density inversion based on correlation searching and the golden section algorithm

For density inversion of gravity anomaly data, once the inversion method is determined, the main factors affecting the inversion result are the inversion parameters and subdivision scheme. A set of reasonable inversion parameters and subdivision scheme can, not only improve the inversion process efficiency, but also ensure inversion result accuracy. The gravity inversion method based on correlation searching and the golden section algorithm is an effective potential field inversion method. It can be used to invert 2D and 3D physical properties with potential data observed on flat or rough surfaces. In this paper, we introduce in detail the density inversion principles based on correlation searching and the golden section algorithm. Considering that the gold section algorithm is not globally optimized. we present a heuristic method to ensure the inversion result is globally optimized. With a series of model tests, we systematically compare and analyze the inversion result efficiency and accuracy with different parameters. Based on the model test results, we conclude the selection principles for each inversion parameter with which the inversion accuracy can be obviously improved.

An analytical model for estimating rock strength parameters from small-scale drilling data

The small-scale drilling technique can be a fast and reliable method to estimate rock strength parameters. It needs to link the operational drilling parameters and strength properties of rock. The parameters such as bit geometry, bit movement, contact frictions and crushed zone affect the estimated parameters.An analytical model considering operational drilling data and effective parameters can be used for these purposes. In this research, an analytical model was developed based on limit equilibrium of forces in a Tshaped drag bit considering the effective parameters such as bit geometry, crushed zone and contact frictions in drilling process. Based on the model, a method was used to estimate rock strength parameters such as cohesion, internal friction angle and uniaxial compressive strength of different rock types from operational drilling data. Some drilling tests were conducted by a portable and powerful drilling machine which was developed for this work. The obtained results for strength properties of different rock types from the drilling experiments based on the proposed model are in good agreement with the results of standard tests. Experimental results show that the contact friction between the cutting face and rock is close to that between bit end wearing face and rock due to the same bit material. In this case,the strength parameters, especially internal friction angle and cohesion, are estimated only by using a blunt bit drilling data and the bit bluntness does not affect the estimated results.

A CONTACT SEARCHING ALGORITHM FOR CONTACT-IMPACT PROBLEMS

A new contact searching algorithm for contact-impact systems is proposed in this paper.In terms of the cell structure and the linked-list,this algo- rithm solves the problem of sorting and searching contacts in three dimensions by transforming it to a retrieving process from two one-dimensional arrays,and binary searching is no longer required.Using this algorithm, the cost of contact searching is reduced to the order of O(N)instead of O(Nlog_2N)for traditional ones,where N is the node number in the system.Moreover,this algorithm can handle contact systems with arbitrary mesh layouts.Due to the simplicity of this algorithm it can be easily implemented in a dynamic explicit finite element program.Our numerical experi- mental result shows that this algorithm is reliable arid efficient for contact searching of three dimensional systems.

Emergency Local Searching Approach for Job Shop Scheduling

Existing methods of local search mostly focus on how to reach optimal solution.However,in some emergency situations,search time is the hard constraint for job shop scheduling problem while optimal solution is not necessary.In this situation,the existing method of local search is not fast enough.This paper presents an emergency local search(ELS) approach which can reach feasible and nearly optimal solution in limited search time.The ELS approach is desirable for the aforementioned emergency situations where search time is limited and a nearly optimal solution is sufficient,which consists of three phases.Firstly,in order to reach a feasible and nearly optimal solution,infeasible solutions are repaired and a repair technique named group repair is proposed.Secondly,in order to save time,the amount of local search moves need to be reduced and this is achieved by a quickly search method named critical path search(CPS).Finally,CPS sometimes stops at a solution far from the optimal one.In order to jump out the search dilemma of CPS,a jump technique based on critical part is used to improve CPS.Furthermore,the schedule system based on ELS has been developed and experiments based on this system completed on the computer of Intel Pentium(R) 2.93 GHz.The experimental result shows that the optimal solutions of small scale instances are reached in 2 s,and the nearly optimal solutions of large scale instances are reached in 4 s.The proposed ELS approach can stably reach nearly optimal solutions with manageable search time,and can be applied on some emergency situations.

Compact Scanning Tunneling Microscope with Large Scale Searching Capability for Mmultidisciplinary Applications

We present the design and performance of a home-built scanning tunneling microscope （STM）, which is compact （66 mm tall and 25 mm in diameter）, yet equipped with a 3D atomic precision piezoelectric motor in which the Z coarse approach relies on a high simplic-ity friction-type walker （of our own invention） driven by an axially cut piezoelectric tube. The walker is vertically inserted in a piezoelectric scanner tube （PST） with its brim laying at on the PST end as the inertial slider （driven by the PST） for the XZ （sample plane） motion. The STM is designed to be capable of searching rare microscopic targets （defects, dopants, boundaries, nano-devices, etc.） in a macroscopic sample area （square millimeters） under extreme conditions （low temperatures, strong magnetic elds, etc.） in which it ts. It gives good atomic resolution images after scanning a highly oriented pyrolytic graphite sample in air at room temperature.

Numerical Simulation for Accuracy of Velocity Analysis in Small-Scale High-Resolution Marine Multichannel Seismic Technology

When used with large energy sparkers, marine multichannel small-scale high-resolution seismic detection technology has a high resolution, high-detection precision, a wide applicable range, and is very flexible. Positive results have been achieved in submarine geological research, particularly in the investigation of marine gas hydrates. However, the amount of traveltime difference information is reduced for the velocity analysis under conditions of a shorter spread length, thus leading to poorer focusing of the velocity spectrum energy group and a lower accuracy of the velocity analysis. It is thus currently debatable whether the velocity analysis accuracy of short-arrangement multichannel seismic detection technology is able to meet the requirements of practical application in natural gas hydrate exploration. Therefore, in this study the bottom boundary of gas hydrates(Bottom Simulating Reflector, BSR) is used to conduct numerical simulation to discuss the accuracy of the velocity analysis related to such technology. Results show that a higher dominant frequency and smaller sampling interval are not only able to improve the seismic resolution, but they also compensate for the defects of the short-arrangement, thereby improving the accuracy of the velocity analysis. In conclusion, the accuracy of the velocity analysis in this small-scale, high-resolution, multi-channel seismic detection technology meets the requirements of natural gas hydrate exploration.

WFRFT modulation recognition based on HOC and optimal order searching algorithm

A hybrid carrier（HC） scheme based on weighted-type fractional Fourier transform（WFRFT） has been proposed recently.While most of the works focus on HC scheme＇s inherent characteristics, little attention is paid to the WFRFT modulation recognition.In this paper, a new theory is provided to recognize the WFRFT modulation based on higher order cumulants（HOC）. First, it is deduced that the optimal WFRFT received order can be obtained through the minimization of 4 th-order cumulants, C_（42）. Then, a combinatorial searching algorithm is designed to minimize C_（42）.Finally, simulation results show that the designed scheme has a high recognition rate and the combinatorial searching algorithm is effective and reliable.

Weak wide-band signal detection method based on small-scale periodic state of Duffing oscillator

The conventional Duffing oscillator weak signal detection method, which is based on a strong reference signal, has inherent deficiencies. To address these issues, the characteristics of the Duffing oscillator＇s phase trajectory in a small- scale periodic state are analyzed by introducing the theory of stopping oscillation system. Based on this approach, a novel Duffing oscillator weak wide-band signal detection method is proposed. In this novel method, the reference signal is discarded, and the to-be-detected signal is directly used as a driving force. By calculating the cosine function of a phase space angle, a single Duffing oscillator can be used for weak wide-band signal detection instead of an array of uncoupled Duffing oscillators. Simulation results indicate that, compared with the conventional Duffing oscillator detection method, this approach performs better in frequency detection intervals, and reduces the signal-to-noise ratio detection threshold, while improving the real-time performance of the system.

Artificial Searching Swarm Algorithm and Its Performance Analysis

Artificial Searching Swarm Algorithm (ASSA) is a new optimization algorithm. ASSA simulates the soldiers to search an enemy’s important goal, and transforms the process of solving optimization problem into the process of searching optimal goal by searching swarm with set rules. This work selects complicated and highn dimension functions to deeply analyse the performance for unconstrained and constrained optimization problems and the results produced by ASSA, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Artificial Fish-Swarm Algorithm (AFSA) have been compared. The main factors which influence the performance of ASSA are also discussed. The results demonstrate the effectiveness of the proposed ASSA optimization algorithm.

Fast Iterative Closest Point-Simultaneous Localization and Mapping(ICP-SLAM)with Rough Alignment and Narrowing-Scale Nearby Searching

Two deficiencies in traditional iterative closest pointsimultaneous localization and mapping( ICP-SLAM) usually result in poor real-time performance. On one hand, relative position between current scan frame and global map cannot be previously known. As a result, ICP algorithm will take much amount of iterations to reach convergence. On the other hand,establishment of correspondence is done by global searching, which requires enormous computational time. To overcome the two problems,a fast ICP-SLAM with rough alignment and narrowing-scale nearby searching is proposed. As for the decrease of iterative times,rough alignment based on initial pose matrix is proposed. In detail,initial pose matrix is obtained by micro-electro-mechanical system( MEMS) magnetometer and global landmarks. Then rough alignment will be applied between current scan frame and global map at the beginning of ICP algorithm with initial pose matrix. As for accelerating the establishment of correspondence, narrowingscale nearby searching with dynamic threshold is proposed,where match-points are found within a progressively constrictive range.Compared to traditional ICP-SLAM,the experimental results show that the amount of iteration for ICP algorithm to reach convergence reduces to 92. 34% and ICP algorithm runtime reduces to 98. 86% on average. In addition,computational cost is kept in a stable level due to the eliminating of the accumulation of computational consumption. Moreover,great improvement can also been achieved in SLAM quality and robustness.

Grover quantum searching algorithm based on weighted targets

The current Grover quantum searching algorithm cannot identify the difference in importance of the search targets when it is applied to an unsorted quantum database, and the probability for each search target is equal. To solve this problem, a Grover searching algorithm based on weighted targets is proposed. First, each target is endowed a weight coefficient according to its importance. Applying these different weight coefficients, the targets are represented as quantum superposition states. Second, the novel Grover searching algorithm based on the quantum superposition of the weighted targets is constructed. Using this algorithm, the probability of getting each target can be approximated to the corresponding weight coefficient, which shows the flexibility of this algorithm. Finally, the validity of the algorithm is proved by a simple searching example.

Factors affecting technical efficiency of small-scale apple farms in Balochistan Plateau, Pakistan

In Balochistan, Agriculture is dominated by small-scale farmers and the apple production sector is confronted with the chronic constraint of low output per unit of input. Although some agricultural policies have been implemented in this province, studies on effectiveness and impacts of such policies over apple production and farmers' performance are still limited. This study is an effort to bridge the research gap on this potential crop in the plateau by investigating technical and scale efficiency of 181 officially designated small-scale apple farmers in mountainous district Mastung in Balochistan; then explored factors that underlie differences in production inefficiency. A two-stage input-oriented Data Envelopment Analysis(DEA) methodology was employed to evaluate technical and scale efficiency followed by truncated bootstrapped regression framework to analyze the correlative determinants to efficiency. Average technical and scale efficiencies of larger landholders were higher than medium and small landholders. Analysis indicated that there is still ample scope for inefficient sample farmers to reduce the input use by 33% without compromising the given yield level. Maximum contributions to the total input savings were from the use of urea, farm yard manure(FYM) and labor-use. Farmer's experience, farm ownership, irrigation constraints, and farmer's access to trainings, credit and extension services significantly affected apple farmers' technical efficiency. Based on the findings of this study, strategies are suggested to enhancing efficiencies by farmers' capacity development through effective extension services and trainings and provision of adequate credit.

Quantum Image Searching Based on Probability Distributions

A quantum image searching method is proposed based on the probability distributions of the readouts from the quantum measurements. It is achieved by using low computational resources which are only a single Hadamard gate combined with m + 1 quantum measurement operations. To validate the proposed method, a simulation experiment is used where the image with the highest similarity value of 0.93 to the particular test image is retrieved as the search result from 4 × 4 binary image database. The proposal provides a basic step for designing a search engine on quantum computing devices where the image in the database is retrieved based on its similarity to the test image.

Shock-induced fracture of dolomite rock in small-scale blast tests

This paper attempts to study dolomite failure using small-scale blast tests.The experimental setup consisted of a cylindrical specimen with a central borehole fitted with a detonation cord inside a copper pipe.The specimen was confined using lead material.During the test,acceleration histories were recorded using sensors placed on the lead confinement.The results showed that heterogeneity and initial cracks significantly influenced the observed failure and cracking patterns.The tests were numerically represented using the previously validated Johnson-HolmquistⅡ(JH-2)constitutive model.The properties of the detonation cord were first determined and verified in a special test with a lead specimen to compare the deformation in the test with that of numerical simulation.Then,the small-scale blast test was simulated,and the failure of the dolomite was compared with the test observations.Comparisons of acceleration histories,scabbing failure,and number of radial cracks and crack density confirmed the overall repeatability of the actual testing data.It is likely that the proposed model can be further used for numerical studies of blasting of dolomite rock.

Study on the Roles of FWUA in Construction, Management and Maintenance of Small-Scale Irrigation and Water Conservancy

In recent years, China has been frequented by floods and droughts which has greatly evoked much concern from the Central Government about rural water conservancy construction. Irrigation is closely related to the "three rural" issues and concerns about the vital interests of farmers. To achieve a virtuous circle of agricultural water supply, it is necessary and urgent to establish Farmer Water User Association (FWUA) to participate in the construction, management and maintenance of small-scale irrigation system. Based on the survey on nationwide "Small-scale irrigation conditions", the roles of FWUA in the construction, management and maintenance of small-scale water conservancy have studied in this study.