Study of a Hydraulic Jump in an Asymmetric Trapezoidal Channel with Different Sluice Gates

In this study,the main properties of the hydraulic jump in an asymmetric trapezoidal flume are analyzed experimentally,including the so-called sequent depths,characteristic lengths,and efficiency.In particular,an asymmetric trapezoidal flume with a length of 7 m and a width of 0.304 m is considered,with the bottom of the flume transversely inclined at an angle of m=0.296 and vertical lateral sides.The corresponding inflow Froude number is allowed to range in the interval(1.40<F1<6.11).The properties of this jump are compared to those of hydraulic jumps in channels with other types of cross-sections.A relationship for calculating hydraulic jump efficiency is proposed for the considered flume.For F1>5,the hydraulic jump is found to be more effective than that occurring in triangular and symmetric trapezoidal channels.Also,when■mes>8 and■>5,the hydraulic jump in the asymmetrical trapezoidal channel downstream of a parallelogram sluice gate is completely formed as opposed to the situation where a triangular sluice is considered.

A Siltation Simulation and Desiltation Measurement Study Downstream of the Suzhou Creek Sluice, China

The Suzhou Creek Sluice is currently the largest underwater plain gate in the world, with a single span of 100 m. It is located in a tidal estuary at the junction of the Huangpu River and Suzhou Creek in Shanghai, China. In this study, physical and 2D vertical mathematical models were used to investigate and distinguish the mechanism of siltation downstream of an underwater plain gate from that of other gates types. According to quantitative data obtained by site investigation and the application of the physical hydrodynamic models, it was found that the characteristics of the tidal estuary as well as the fact that the sluice span is equal to the creek width are the major reasons contributing to siltation. A possible desiltation treatment system is proposed for the underwater plain gate. The system includes selection of a suitable location that allows the determination of a reasonable top elevation of the sluice floor, reserving sufficient space under the gate to accommodate siltation, setting up a mechanical desiltation system, and flushing silt along with overflow over the top of the gate. Furthermore, on-site hydraulic silt flushing experiments and a topography survey were conducted. These results showed that the measurement system is effective, and by maintaining this scheduled operation once a month, the downstream riverbed has been maintained in a good condition.

Numerical investigation on the flow and power of small-sized multi-bladed straight Darrieus wind turbine

Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.

Silting in the Lower Courses of Tidal Sluices in China

Serious sediment deposition often occurs after the construction of tidal sluices in small or medium-sized tidal muddy estuaries, so desilting or dredging is needed to meet the demands of flood discharge, saltwater retaining, and navigation in those areas. In this paper, the problem of sediment deposition induced by construction of tidal sluices is analyzed. Different problems of silting near tidal sluices for different types of estuaries are summed up, at the same time, corresponding methods are given to solve these problems, and a few successful examples are also given. The idea of comprehensive regulation and utilization of estuaries is put forward, and some proposals for solution of sediment deposition in this kind of estuaries are made.

k_(eff)uncertainty quantification and analysis due to nuclear data during the full lifetime burnup calculation for a small-sized prismatic high temperature gas-cooled reactor

To benefit from recent advances in modeling and computational algorithms,as well as the availability of new covariance data,sensitivity and uncertainty analyses are needed to quantify the impact of uncertain sources on the design parameters of small prismatic high-temperature gascooled reactors(HTGRs).In particular,the contribution of nuclear data to the k_(eff)uncertainty is an important part of the uncertainty analysis of small-sized HTGR physical calculations.In this study,a small-sized HTGR designed by China Nuclear Power Engineering Co.,Ltd.was selected for k_(eff)uncertainty analysis during full lifetime burnup calculations.Models of the cold zero power(CZP)condition and full lifetime burnup process were constructed using the Reactor Monte Carlo Code RMC for neutron transport calculation,depletion calculation,and sensitivity and uncertainty analysis.For the sensitivity analysis,the Contribution-Linked eigenvalue sensitivity/Uncertainty estimation via Track length importance Characterization(CLUTCH)method was applied to obtain sensitive information,and the "sandwich" method was used to quantify the k_(eff)uncertainty.We also compared the k_(eff)uncertainties to other typical reactors.Our results show that ^(235)U is the largest contributor to k_(eff)uncertainty for both the CZP and depletion conditions,while the contribution of ^(239)Pu is not very significant because of the design of low discharge burnup.It is worth noting that the radioactive capture reaction of ^(28)Si significantly contributes to the k_(eff)uncertainty owing to its specific fuel design.However,the k_(eff)uncertainty during the full lifetime depletion process was relatively stable,only increasing by 1.12%owing to the low discharge burnup design of small-sized HTGRs.These numerical results are beneficial for neutronics design and core parameters optimization in further uncertainty propagation and quantification study for small-sized HTGR.

Assessment for Production and Operation Ability of Medium and Small-sized Enterprises Based on Neural Network

In order to improve production and operation ability of medium and small-sized enterprises, an assessment-index system of production and operation ability was proposed, and a corresponding assessment model was established based on BP neural network. The conjunction weights of the neural network were continuously modified from output layer to input layer in the process of neural network training to reduce the errors between the anticipated and actual outputs. The results from an example show that this method is reliable and feasible. The production and operation abilitv of an enterorise with assessed result of 0.833 is fairly oowerful, and that with assessed result of 0.644 is average.

Study on Contra-Rotating Small-Sized Axial Flow Hydro Turbine

It is thought that small hydropower generation is alternative energy, and the energy potential of small hydropower is large. The efficiency of small hydro turbines is lower than that of large one, and these small hydro turbine’s common problems are out of operation by foreign materials. Then, there are demands for small hydro turbines to keep high per- formance and wide flow passage. Therefore, we adopted contra-rotating rotors which can be expected to achieve high performance and low-solidity rotors with wide flow passage in order to accomplish high performance and stable opera- tion. Final goal on this study is development of an electric appliance type small hydro turbine which has high portability and makes an effective use of the unused small hydro power energy source. In the present paper, the performance and the internal flow conditions in detail of contra-rotating small-sized axial flow hydro turbine are shown as a first step of the research with the numerical flow analysis. Then, a capability adopting contra-rotating rotors to an electric appliance type small hydro turbine was discussed. Furthermore, the high performance design for it was considered by the numeri- cal analysis results.

Gate Lip Hydraulics under Sluice Gate

This paper present the effect of the lower gate lip on the coefficient of contraction, velocity and discharge which have been made in a rectangular flume with four gates opening from (2 to 4.5) cm, five different discharges from (6.2 to 18.15) l/s and five different gate cases (vertical and inclined vertically) by angle (45)° with and opposite flow direction with horizontal and sharp lower lip. The values of coefficients of contraction (Cc) and discharge (Cd) increases when gate slope increases with flow direction and the lower lip is horizontal, these increases are (16)% and (18)% respecttively, while these values decreases when gate slope increases opposite flow direction and the lower lip is horizontal these decreases are (13)% and (11)% respectively. The values of coefficient of velocity (Cv) remain constant and don’t effect with changes of gate slope or gate lip.

Effect of Organic and Chemical Fertilizer Application on Growth, Yield, and Quality of Small-Sized Tomatoes

Tomatoes in Japan are generally cultivated under management systems that use chemical fertilizers and synthetic chemical pesticides. However, the continuous use of these fertilizers and pesticides damages the soil environment and reduces the number of soil microorganisms. Organic farming has a relatively low environmental impact compared to conventional farming techniques, but typically has lower and more unstable yields. In this study, we investigated the effect of organic and chemical fertilizer application on growth, yield, and quality of small-sized (cherry) tomatoes. Cherry tomatoes were cultivated using organic and chemical organic fertilizers. Average weight and lateral diameter were significantly higher under organic fertilizer than under chemical fertilizer. In addition, shoot dry weight was significantly higher under organic fertilizer than chemical fertilizer. Lycopene content was significantly higher under organic fertilizer than chemical fertilizer. The total carbon (TC), total phosphorus (TP), total potassium (TK), available phosphoric (SP) and exchangeable potassium (SK) contents, C/N ratio, and pH were significantly higher under organic fertilizer than chemical fertilizer. Bacterial biomass, nitrite (NO? 2-N) oxidation activity, nitrification (N) circulation activity, and phosphoric (P) circulation were higher under organic fertilizer than chemical fertilizer. From these results, the study indicates that appropriate controls such as TC, total nitrogen (TN), and C/N ratio of organic fertilizer increased microbial biomass and enhanced nutrient circulation such as N circulation activity and P circulation activity. These results can be used to improve current organic farming practices and promote soil conservation.

Performance and Internal Flow of Contra-Rotating Small-Sized Cooling Fan

High pressure and large flow rate small-sized cooling fans are used for servers in data centers and there is a strong demand to increase its performance because of increase of quantity of heat from servers. Contra-rotating rotors have been adopted for some of high pressure and large flow rate cooling fans to meet the demand. The performance curve of the contra-rotating small-sized cooling fan with 40 mm square casing was investigated by an experimental apparatus and its internal flow condition was clarified by the numerical analysis. The fan static pressure of the front rotor was extremely low and it increased significantly at the rear rotor. The uniform flow was achieved at the inlet of the rear rotor because of the special shape of the casing between the front and rear rotors. On the other hand, the tip leakage flow was large enough to influence on the main flow of the test cooling fan by the design specification of high pressure with compact rotor diameter.

Internal Flow Condition between Front and Rear Rotor of Contra-Rotating Small-Sized Axial Fan at Low Flow Rate

Contra-rotating small-sized fans are used as cooling fans for electric equipment. The internal flow condition between the front and rear rotors of the contra-rotating small-sized fan is not known well especially at the low flow rate. Furthermore, the blade row distance between the front and rear rotors is an important parameter for the contra-rotating small-sized fan and its influence on the internal flow condition is not clarified at the low flow rate. Therefore, the internal flow condition of the contra-rotating small-sized fan at the low flow rate is investigated by the numerical analysis in this research. The numerical analysis results are validated by comparing the fan static pressure curves of the numerical results to the experimental results. The internal flow condition at the low flow rate is clarified using the numerical models of the different blade row distance L = 10 mm and 30 mm. In the present paper, pressure fluctuations phase locked each front and rear rotor’s rotation are shown and the influences of the wake and the potential interference are discussed by the unsteady numerical analysis results at the low flow rate.

Study on Construction and Countermeasures of Technological Innovation Environment within Medium and Small-sized Enterprises in Hubei Province

Based on the application of the latest technological innovation theory and the successful experience generated by the domestic and overseas medium and small-sized enterprises, this thesis proposes a theoretical framework, strategic proposition and some secure measures for the regional technological innovation to promote the technological innovation within medium and small-sized enterprises in Hubei Province. In addition, the author also provides some tactics concerning the original motivation, technological market, innovation talents and innovation system, which aim at offering some consultation for the government decision, optimize industrial structure, implement the innovation strategy and propel to the medium and small-sized enterprises＇ development.

Space-to-Ground Quantum Key Distribution Using a Small-Sized Payload on Tiangong-2 Space Lab

Quantum technology establishes a foundation for secure communication via quantum key distribution （QKD）. In the last two decades, the rapid development of QKD makes a global quantum communication network feasible. In order to construct this network, it is economical to consider small-sized and low-cost QKD payloads, which can be assembled on satellites with different sizes, such as space stations. Here we report an experimental demonstration of space-to-ground QKD using a small-sized payload, from Tiangong-2 space lab to Nanshan ground station. The 57.9-kg payload integrates a tracking system, a QKD transmitter along with modules for synchronization, and a laser communication transmitter. In the space lab, a 50MHz vacuum＋weak decoy-state optical source is sent through a reflective telescope with an aperture of 200mm. On the ground station, a telescope with an aperture of 1200mm collects the signal photons. A stable and high-transmittance communication channel is set up with a high-precision bidirectional tracking system, a polarization compensation module, and a synchronization system. When the quantum link is successfully established, we obtain a key rate over 100bps with a communication distance up to 719km. Together with our recent development of QKD in daylight, the present demonstration paves the way towards a practical satellite-constellation-based global quantum secure network with small-sized QKD payloads.

Study on Virtual Training Management in Small-sized Enterprises

This paper firstly analyses the necessity of virtual management in small-sized enterprises, then presents two main modes to implement virtual training management in small-sized enterprises. The paper also points out the best mode for the small-sized enterprises＇ training to implement virtual management.

A Study on USA Promoting the Development of Middle and Small-sized Enterprises and Its Revelation

The middle and small-sized enterprises of USA develop very well, and they are the pillars of American economy. The long-term development of middle and small-sized enterprises lies in suitable supporting countermeasures and clear economic function of the government. The development of middle and small-sized enterprises of USA brings China many useful revelations.

Peers Small-sized Group Work-A Beneficial Form of Classroom Interaction

Classroom interaction plays a critical role in language teaching and learning process.It involves both the teacher-students,and students-students.This article is intended to explore the vital significance of classroom interaction in language learning process with the emphasis placed on the students' involvement in the classroom activities,furthermore,to discover whether the peers small-sized group work is a beneficial and irreplaceable form of classroom interaction.

感潮河段城市湿地水动力模拟及改善方案研究

湿地具有固碳释氧、涵养水源等作用,改善水体交换能力是湿地研究热点之一,但关于潮汐变动水位条件下湿地水体调控措施的探究相对较少。以长江南京段绿水湾湿地为例,建立平面二维水动力模型,开展感潮河段城市湿地水动力模拟及改善方案研究。计算不同水文条件及闸泵调度方案下湿地流场,分析潮位变动对绿水湾湿地水动力的影响,分析不同闸泵调度措施对水体流动性的改善效果。研究表明,闸泵联合调度可使枯季大部分区域水动力明显增强,但仍存在主槽外坑塘等局部滞水区,需通过湿地植被重构的方式提高水体自净能力。对易暴发藻类的4—5月,闸泵联合调度可较好改善绿水湾内上游区域的水动力条件,对于改善效果并不明显的下游区域建议增设补水点,降低水体富营养化风险。本研究可为绿水湾湿地的设计、建设与管理提供科学依据。

基于遗传程序水闸综合智能化控制系统的设计

提出了一种基于遗传程序的水闸综合智能化控制系统,旨在解决传统水闸控制系统中由于一对一布线导致的可靠性问题。研究涵盖了系统的硬件设计包括通信功能与监控界面,以及软件设计特别是利用遗传程序确定控制目标的传递函数和设计回路控制器。通过实验测试,结果显示该控制系统显著降低了元件总故障率,提高了闸门开度控制的准确性,增强了系统的可靠性。这一发现证明了遗传程序技术在智能化控制系统中的应用价值,为水闸控制系统的设计和优化提供了新的方向。

基于Copula函数的水闸变形实时风险率量化模型

变形监测数据实时反映了水闸结构性态及所受荷载的特性,若能根据水闸变形监测资料确定其失效风险概率,将得到更可靠的结果。将原位监测资料融入水闸失效概率分析中,提出一种基于Copula函数的水闸变形实时风险率量化模型,在考虑水闸各部位监测效应量差异性与关联性的基础上,将单测点变形风险率提升为多测点变形风险率,进而实现水闸整体变形风险率的实时量化分析。实例分析表明,模型实现了水闸变形实测效应量与风险率的动态转化,对水闸变形实时风险率进行了整体分析;所得结果符合水闸整体变形风险率变化的基本规律和客观事实,可有效解读工程监测信息和直观反映工程运行性状,可为水闸工程的运行管理和安全监控提供理论依据与技术支撑。