Study of the Influence of the Distance between Smoke Outlets and Fire Source on Smoke Flow Characteristics in Tunnel Fires

This paper explores the smoke flow characteristics in tunnel fires,giving a particular emphasis on the effects of different distances between the smoke outlets and the fire source.It examines the smoke behavior under different conditions,including variations in heat release rates,exhaust volumetric flow rates,spacing between smoke outlets,and the longitudinal fire source positions.Results indicate that altering the fire source positions and the smoke outlets in the tunnel leads to variations in the properties of smoke flow both the fire source upstream and downstream;the distance between fire source and smoke outlet increases gradually,airflow rate decreases initially and eventually reaches a stable state.Similarly,smoke mass flow rate exhibits an increasing trend that eventually reaches a stable state.Moreover,the heat exchange between the tunnel walls and hot smoke increases as the smoke outlet moves further away from the fire source.This interaction leads to a reduction in the heat exhaust coefficient and a decrease in the distance the smoke spreads.This study investigates the impact of altering the relative longitudinal fire source positions and smoke outlet on smoke flow characteristics by numerical simulation.A theoretical analytical method is used to give a predictive model for the heat exhaust coefficient and the smoke spreading distance.This research can support the theory and technical process of tunnel smoke exhaust prevention and control.

Study on the Influence of Setting Parameters of Tunnel Centralized Smoke Extraction System on Fire Smoke Flow and Temperature Decay

The centralized smoke exhaust system of shield tunnel is an important determinant for tunnel fire safety,and the use of different design parameters of the tunnel smoke exhaust system will affect the smoke exhaust effect in the tunnel,and the influence of different design parameters on the smoke exhaust effect and temperature attenuation of the tunnel can help engineers in designing a more effective centralized smoke exhaust system for the tunnel.In this paper,the Fire Dynamic Simulator(FDS)is utilized to examine smoke exhaust vent settings for a centralized exhaust system in shield tunnel with both flat and sloped conditions,including slopes of+4.5%and−4.5%,under a 30MWfire power with a 150m^(3)/s smoke exhaust rate.The results suggest that maintaining a vent spacing of 60m and a vent size of 4.0 m×1.5 m is a reasonable configuration for centralized smoke exhaust systems in both flat and slope shield tunnels.This choice helpsminimize construction costs and prevent excessive smoke accumulation.It also promotes favorable conditions for maintaining temperature distribution at 2-m height,visibility,smoke spread distance,and temperature below the ceiling,all below the threshold values,while ensuring high smoke extraction efficiency.However,in the slope section,the chimney effect can disrupt exhaust efficiency,visibility,ceiling temperature,and temperature distribution at a height of 2 m.Employing different opening methods,such as having 2 vents up and 4 vents down in a+4.5%slope and 4 vents up and 2 vents down in a−4.5%slope,can help mitigate these effects.Furthermore,the temperature decay formula for shield tunnels follows a bi-exponential decay pattern,and different design parameters of centralized smoke exhaust systems have minimal effects on temperature decay in shield tunnels.

Smoke distribution in naturally ventilated urban transportation tunnels with multiple shafts

The smoke spreading law of urban transportation tunnels with multiple shafts under natural ventilation is studied.A full-scale burning experiment is conducted in an actual tunnel.The study shows that smoke temperatures below the tunnel ceiling reduce rapidly along the longitudinal towards the tunnel exits. A noticeable temperature stratification is observed near the fire source.Most fire smoke is exhausted out of the shafts while the number of the smoke shafts in the downstream is more than that in the upstream.Large eddy simulation LES based on computational fluid dynamics CFD is carried out using the fire dynamics simulator FDS software with parallel processing in which the grid size of the fire-domain is set to be 0.083 m.The simulation results of temperatures under the ceiling the smoke fronts and the shafts＇smoke exhaust or air supply agree reasonably with the experimental data. Further simulations indicate that the decreasing ambient temperature or shaft spacing might reduce smoke temperatures under the tunnel ceiling and increase mass flow rates out of the shafts.This study provides technical scientific evidence and supports for the design and construction of such kinds of tunnels.

Simulation on spread of fire smoke in the elevator shaft for a high-rise building

Spread of fire smoke in the elevator shaft of a high-rise building is influ- enced by many driving facts. We simulate smoke spreading in the elevator shaft, stair room, and pre-chamber with and without different supplied pressurized air. The simulation shows that smoke moves very fast in the elevator shaft. When a 12 floor high-rise building is in fire, smoke can fill up the elevator shaft in less than 1.5 min after a fire started, temperature in the elevator shaft can be higher than 187℃ in 5 rain, and the concentration of CO can also reach a high level. The elevator shaft has a very low visibility in less than about 100 s.

Experimental study on fire smoke movement in a multi-floor and multi-room building

Fire smoke movement of multi-floor and multi-room (MFMR) fire was studied at the model test building in State Key Laboratory of Fire Science (SKLFS). The ingredient, temperature, air pressure difference and air velocity of smoke were measured and analyzed. Meanwhile, the hazard of smoke ingredient to exposed occupants was analyzed based on the national standard, Occupational Exposure Limit for Hazardous Agents in the Workplace (GBZ2-2002). The experimental results showed that the maximum temperature difference in MFMR fire was located along the vertical height from the fire source. With the spreading and diffusion of smoke, the temperature of smoke layer would tend to be no difference. In the fire of woodpile and kerosene, the main smoke ingredients such as SO 2 , CO and CO 2 would first exceed human’s average physiological limit, while smoke ingredients such as NO and NO 2 would come behind. Because of the higher fluctuation range and frequency of air pressure difference of smoke in multi-layer building fire, the fire smoke would spread around everywhere of the passageway and made the human evacuation more difficult.