Smooth constraint is important in linear inversion, but it is difficult to apply directly to model parameters in genetic algorithms. If the model parameters are smoothed in iteration, the diversity of models will be g...Smooth constraint is important in linear inversion, but it is difficult to apply directly to model parameters in genetic algorithms. If the model parameters are smoothed in iteration, the diversity of models will be greatly suppressed and all the models in population will tend to equal in a few iterations, so the optimal solution meeting requirement can not be obtained. In this paper, an indirect smooth constraint technique is introduced to genetic inversion. In this method, the new models produced in iteration are smoothed, then used as theoretical models in calculation of misfit function, but in process of iteration only the original models are used in order to keep the diversity of models. The technique is effective in inversion of surface wave and receiver function. Using this technique, we invert the phase velocity of Raleigh wave in the Tibetan Plateau, revealing the horizontal variation of S wave velocity structure near the center of the Tibetan Plateau. The results show that the S wave velocity in the north is relatively lower than that in the south. For most paths there is a lower velocity zone with 12-25 km thick at the depth of 15-40 km. The lower velocity zone in upper mantle is located below the depth of 100 km, and the thickness is usually 40-80 km, but for a few paths reach to 100 km thick. Among the area of Ando, Maqi and Ushu stations, there is an obvious lower velocity zone with the lowest velocity of 4.2-4.3 km/s at the depth of 90-230 km. Based on the S wave velocity structures of different paths and former data, we infer that the subduction of the Indian Plate is delimited nearby the Yarlung Zangbo suture zone.展开更多
As the mesh models usually contain noise data,it is necessary to eliminate the noises and smooth the mesh.But existed methods always lose geometric features during the smoothing process.Hence,the noise is considered a...As the mesh models usually contain noise data,it is necessary to eliminate the noises and smooth the mesh.But existed methods always lose geometric features during the smoothing process.Hence,the noise is considered as a kind of random signal with high frequency,and then the mesh model smoothing is operated with signal processing theory.Local wave analysis is used to deal with geometric signal,and then a novel mesh smoothing method based on the local wave is proposed.The proposed method includes following steps：Firstly,analyze the principle of local wave decomposition for 1D signal,and expand it to 2D signal and 3D spherical surface signal processing;Secondly,map the mesh to the spherical surface with parameterization,resample the spherical mesh and decompose the spherical signals by local wave analysis;Thirdly,propose the coordinate smoothing and radical radius smoothing methods,the former filters the mesh points＇ coordinates by local wave,and the latter filters the radical radius from their geometric center to mesh points by local wave;Finally,remove the high-frequency component of spherical signal,and obtain the smooth mesh model with inversely mapping from the spherical signal.Several mesh models with Gaussian noise are processed by local wave based method and other compared methods.The results show that local wave based method can obtain better smoothing performance,and reserve more original geometric features at the same time.展开更多
Wave energy is an important renewable energy source. Previous studies of wave energy conversion(WEC) have focused on the maximum power take-off(PTO) techniques of a single machine. However, there is a lack of research...Wave energy is an important renewable energy source. Previous studies of wave energy conversion(WEC) have focused on the maximum power take-off(PTO) techniques of a single machine. However, there is a lack of research on the energy and power quality of wave farm systems. Owing to the pulsating nature of ocean waves and popular PTO devices, the generated electrical power suffers from severe fluctuations. Existing solutions require extra energy storage and overrated power converters for wave power integration. In this study, we developed a master-slave wave farm system with rotor inertia energy storage; this system delivers self-smoothed power output to the grid and reduces the number of converters. Two control methods based on the moving average filter(MAF) and energy filter(EF) are proposed to smooth the output power of wave farms. RTDS simulations show that the proposed systems and control methods facilitate simple and smooth grid integration of wave energy.展开更多
The existence of a global smooth solution for the initial value problem of generalized Kuramoto-Sivashinsky type equations have been obtained. Similarty siolutions and the structure of the traveling waves solution for...The existence of a global smooth solution for the initial value problem of generalized Kuramoto-Sivashinsky type equations have been obtained. Similarty siolutions and the structure of the traveling waves solution for the generalized KS equations are discussed and analysed by using the qualitative theory of ODE and Lie's infinitesimal transformation respectively.展开更多
Free surface flows are of significant interest in Computational Fluid Dynamics（CFD）. However, violent water wave impact simulation especially when free surface breaks or impacts on solid wall can be a big challenge ...Free surface flows are of significant interest in Computational Fluid Dynamics（CFD）. However, violent water wave impact simulation especially when free surface breaks or impacts on solid wall can be a big challenge for many CFD techniques. Smoothed Particle Hydrodynamics（SPH） has been reported as a robust and reliable method for simulating violent free surface flows. Weakly compressible SPH（WCSPH） uses an equation of state with a large sound speed, and the results of the WCSPH can induce a noisy pressure field and spurious oscillation of pressure in time history for wave impact problem simulation. As a remedy, the truly incompressible SPH（ISPH） technique was introduced, which uses a pressure Poisson equation to calculate the pressure. Although the pressure distribution in the whole field obtained by ISPH is smooth, the stability of the techniques is still an open discussion. In this paper, a new free surface identification scheme and solid boundary handling method are introduced to improve the accuracy of ISPH. This modified ISPH is used to study dam breaking flow and violent tank sloshing flows. On the comparative study of WCSPH and ISPH, the accuracy and efficiency are assessed and the results are compared with the experimental data.展开更多
By using the theory of planar dynamical systems to the ion acoustic plasma equations, we obtain the existence of the solutions of the smooth and non-smooth solitary waves and the uncountably infinite smooth and non-sm...By using the theory of planar dynamical systems to the ion acoustic plasma equations, we obtain the existence of the solutions of the smooth and non-smooth solitary waves and the uncountably infinite smooth and non-smooth periodic waves. Under the given parametric conditions, we present the sufficient conditions to guarantee the existence of the above solutions.展开更多
An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective functio...An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective function to enhance angular momentum conservation in a particle-based calculation.And a new estimation method is proposed to predict the pressure on the horizontal plate.Then,the model simulates the variation characteristics of impact pressures generated by regular wave slamming.The main features of velocity field and pressure field near the plate are presented.The present numerical model can be used to study wave impact load on the horizontal plate.展开更多
The theory of planar dynamical systems is used to study the dynamical behaviours of travelling wave solutions of a nonlinear wave equations of KdV type. In different regions of the parametric space, sufficient conditi...The theory of planar dynamical systems is used to study the dynamical behaviours of travelling wave solutions of a nonlinear wave equations of KdV type. In different regions of the parametric space, sufficient conditions to guarantee the existence of solitary wave solutions, periodic wave solutions, kink and anti-kink wave solutions are given. All possible exact explicit parametric representations are obtained for these waves.展开更多
Using the bifurcation theory of dynamical systems to a class of nonlinear fourth order analogue of the B(m,n) equation, the existence of solitary wave solutions, periodic cusp wave solutions, compactons solutions, and...Using the bifurcation theory of dynamical systems to a class of nonlinear fourth order analogue of the B(m,n) equation, the existence of solitary wave solutions, periodic cusp wave solutions, compactons solutions, and uncountably infinite many smooth wave solutions are obtained. Under different parametric conditions, various sufficient conditions to guarantee the existence of the above solutions are given. Some exact explicit parametric representations of the above waves are determined.展开更多
This paper is devoted to the long time behavior of the solution to the initial boundary value problems for a class of the Kirchhoff wave equations with nonlinear strongly damped terms: . Firstly, in order to prove the...This paper is devoted to the long time behavior of the solution to the initial boundary value problems for a class of the Kirchhoff wave equations with nonlinear strongly damped terms: . Firstly, in order to prove the smoothing effect of the solution, we make efficient use of the analytic property of the semigroup generated by the principal operator of the equation in the phase space. Then we obtain the regularity of the global attractor and construct the approximate inertial manifold of the equation. Finally, we prove that arbitrary trajectory of the Kirchhoff wave equations goes into a small neighbourhood of the approximate inertial manifold after large time.展开更多
基金State Natural Science Foundation (49874021).Contribution No. 01FE2002, Institute of Geophysics, China Seismological Bureau.
文摘Smooth constraint is important in linear inversion, but it is difficult to apply directly to model parameters in genetic algorithms. If the model parameters are smoothed in iteration, the diversity of models will be greatly suppressed and all the models in population will tend to equal in a few iterations, so the optimal solution meeting requirement can not be obtained. In this paper, an indirect smooth constraint technique is introduced to genetic inversion. In this method, the new models produced in iteration are smoothed, then used as theoretical models in calculation of misfit function, but in process of iteration only the original models are used in order to keep the diversity of models. The technique is effective in inversion of surface wave and receiver function. Using this technique, we invert the phase velocity of Raleigh wave in the Tibetan Plateau, revealing the horizontal variation of S wave velocity structure near the center of the Tibetan Plateau. The results show that the S wave velocity in the north is relatively lower than that in the south. For most paths there is a lower velocity zone with 12-25 km thick at the depth of 15-40 km. The lower velocity zone in upper mantle is located below the depth of 100 km, and the thickness is usually 40-80 km, but for a few paths reach to 100 km thick. Among the area of Ando, Maqi and Ushu stations, there is an obvious lower velocity zone with the lowest velocity of 4.2-4.3 km/s at the depth of 90-230 km. Based on the S wave velocity structures of different paths and former data, we infer that the subduction of the Indian Plate is delimited nearby the Yarlung Zangbo suture zone.
基金supported by National Natural Science Foundation of China (Grant No. 61075118,Grant No. 61005056,Grant No. 60975016)National Key Technology Support Program of China (Grant No. 2007BAH11B02)+1 种基金Zhejiang Provincial Natural Science Foundation of China (Grant No. Y1100880)Open Project Program of State Key Laboratory of CAD&CG of China (Grant No. A0906)
文摘As the mesh models usually contain noise data,it is necessary to eliminate the noises and smooth the mesh.But existed methods always lose geometric features during the smoothing process.Hence,the noise is considered as a kind of random signal with high frequency,and then the mesh model smoothing is operated with signal processing theory.Local wave analysis is used to deal with geometric signal,and then a novel mesh smoothing method based on the local wave is proposed.The proposed method includes following steps：Firstly,analyze the principle of local wave decomposition for 1D signal,and expand it to 2D signal and 3D spherical surface signal processing;Secondly,map the mesh to the spherical surface with parameterization,resample the spherical mesh and decompose the spherical signals by local wave analysis;Thirdly,propose the coordinate smoothing and radical radius smoothing methods,the former filters the mesh points＇ coordinates by local wave,and the latter filters the radical radius from their geometric center to mesh points by local wave;Finally,remove the high-frequency component of spherical signal,and obtain the smooth mesh model with inversely mapping from the spherical signal.Several mesh models with Gaussian noise are processed by local wave based method and other compared methods.The results show that local wave based method can obtain better smoothing performance,and reserve more original geometric features at the same time.
基金supported by EPSRC under Grant EP/ L017725/1 and Grant EP/N032888/1
文摘Wave energy is an important renewable energy source. Previous studies of wave energy conversion(WEC) have focused on the maximum power take-off(PTO) techniques of a single machine. However, there is a lack of research on the energy and power quality of wave farm systems. Owing to the pulsating nature of ocean waves and popular PTO devices, the generated electrical power suffers from severe fluctuations. Existing solutions require extra energy storage and overrated power converters for wave power integration. In this study, we developed a master-slave wave farm system with rotor inertia energy storage; this system delivers self-smoothed power output to the grid and reduces the number of converters. Two control methods based on the moving average filter(MAF) and energy filter(EF) are proposed to smooth the output power of wave farms. RTDS simulations show that the proposed systems and control methods facilitate simple and smooth grid integration of wave energy.
文摘The existence of a global smooth solution for the initial value problem of generalized Kuramoto-Sivashinsky type equations have been obtained. Similarty siolutions and the structure of the traveling waves solution for the generalized KS equations are discussed and analysed by using the qualitative theory of ODE and Lie's infinitesimal transformation respectively.
基金supported by the National Natural Science Foundations of China(Grant Nos.51009034 and 51279041)Fundamental Research Funds for the Central Universities(Grant Nos.HEUCDZ1202 and HEUCF120113)Pre-Research Foundation of General Armament Department of China(Grant No.9140A14020712CB01158)
文摘Free surface flows are of significant interest in Computational Fluid Dynamics（CFD）. However, violent water wave impact simulation especially when free surface breaks or impacts on solid wall can be a big challenge for many CFD techniques. Smoothed Particle Hydrodynamics（SPH） has been reported as a robust and reliable method for simulating violent free surface flows. Weakly compressible SPH（WCSPH） uses an equation of state with a large sound speed, and the results of the WCSPH can induce a noisy pressure field and spurious oscillation of pressure in time history for wave impact problem simulation. As a remedy, the truly incompressible SPH（ISPH） technique was introduced, which uses a pressure Poisson equation to calculate the pressure. Although the pressure distribution in the whole field obtained by ISPH is smooth, the stability of the techniques is still an open discussion. In this paper, a new free surface identification scheme and solid boundary handling method are introduced to improve the accuracy of ISPH. This modified ISPH is used to study dam breaking flow and violent tank sloshing flows. On the comparative study of WCSPH and ISPH, the accuracy and efficiency are assessed and the results are compared with the experimental data.
基金supported by the National Natural Science Foundation of China (No. 10971085)
文摘By using the theory of planar dynamical systems to the ion acoustic plasma equations, we obtain the existence of the solutions of the smooth and non-smooth solitary waves and the uncountably infinite smooth and non-smooth periodic waves. Under the given parametric conditions, we present the sufficient conditions to guarantee the existence of the above solutions.
基金Supported by the National Science Foundation of China(51109022)the National Science Foundation of Liaoning Province(201202020)the Key Laboratory Foundation of Dalian University of Technoloty(LP12005)
文摘An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective function to enhance angular momentum conservation in a particle-based calculation.And a new estimation method is proposed to predict the pressure on the horizontal plate.Then,the model simulates the variation characteristics of impact pressures generated by regular wave slamming.The main features of velocity field and pressure field near the plate are presented.The present numerical model can be used to study wave impact load on the horizontal plate.
基金Project supported by the National Natural Science Foundation of China (No.10231020)the Natural Science Foundation of Yunnan Province of China (No.2003A0018M)Key Project of the Science Foundation of Yunnan Education Department of China (No.5Z0071A)
文摘The theory of planar dynamical systems is used to study the dynamical behaviours of travelling wave solutions of a nonlinear wave equations of KdV type. In different regions of the parametric space, sufficient conditions to guarantee the existence of solitary wave solutions, periodic wave solutions, kink and anti-kink wave solutions are given. All possible exact explicit parametric representations are obtained for these waves.
文摘Using the bifurcation theory of dynamical systems to a class of nonlinear fourth order analogue of the B(m,n) equation, the existence of solitary wave solutions, periodic cusp wave solutions, compactons solutions, and uncountably infinite many smooth wave solutions are obtained. Under different parametric conditions, various sufficient conditions to guarantee the existence of the above solutions are given. Some exact explicit parametric representations of the above waves are determined.
文摘This paper is devoted to the long time behavior of the solution to the initial boundary value problems for a class of the Kirchhoff wave equations with nonlinear strongly damped terms: . Firstly, in order to prove the smoothing effect of the solution, we make efficient use of the analytic property of the semigroup generated by the principal operator of the equation in the phase space. Then we obtain the regularity of the global attractor and construct the approximate inertial manifold of the equation. Finally, we prove that arbitrary trajectory of the Kirchhoff wave equations goes into a small neighbourhood of the approximate inertial manifold after large time.
