Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.E...Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.EC is also the most widely used electrolyte solvent in sodium ion batteries.However,compared to lithium metal,sodium metal(Na)shows higher activity and reacts violently with EC-based electrolyte(NaPF_(6)as solute),which leads to the failure of sodium metal batteries(SMBs).Herein,we reveal the electrochemical instability mechanism of EC on sodium metal battery,and find that the com-bination of EC and NaPF_(6) is electrically reduced in sodium metal anode during charging,resulting in the reduction of the first coulombic efficiency,and the continuous consumption of electrolyte leads to the cell failure.To address the above issues,an additive modified linear carbonate-based electrolyte is provided as a substitute for EC based electrolytes.Specifically,ethyl methyl carbonate(EMC)and dimethyl carbon-ate(DMC)as solvents and fluoroethylene carbonate(FEC)as SEI-forming additive have been identified as the optimal solvent for NaFP_(6)based electrolyte and used in Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))/Na batteries.The batter-ies exhibit excellent capacity retention rate of about 80%over 1000 cycles at a cut-off voltage of 4.3 V.展开更多
Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation...Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation during sodium ion de-intercalation and the main frame mechanism remains unchanged,and thus is seen as an energy storage material for a wide range of applications,but has a limited electronic conductivity due to its structure.In this paper,NVP cathode materials with finer primary particles are successfully prepared using a simple hydrothermal treatment-assisted sol-gel method.The increased pore size of the NVP materials prepared under the hydrothermal process allows for more active sites and more effective resistance to the volume deformation of sodium ions during insertion/extraction processes,effectively facilitating the diffusion of ions and electrons.The Na_(3)V_(2)(PO_(4))_(3) material obtained by the optimized process exhibited good crystallinity in XRD characterization,as well as superior electrochemical properties in a series of electrochemical tests.A specific capacitance of 106.3 mAh g^(-1) at 0.2 C is demonstrated,compared to 96.5 mAh g^(-1) for Na_(3)V_(2)(PO_(4))_(3) without hydrothermal treatment,and cycling performance is also improved with 93%capacity retention.The calculated sodium ion diffusion coefficient(DNa=5.68×10^(-14))obtained after EIS curve fitting of the improved sample illustrates that the pore structure is beneficial to the performance of the Na_(3)V_(2)(PO_(4))_(3)cathode material.展开更多
With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges o...With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges on its poor intrinsic electronic conductivity and the controversial de/sodiation mechanism.Herein,a series of Zr-doped NVPF coated by N-doped carbon layer(~5 nm in thickness,homogenously)materials are fabricated by a sol-gel method,and the optimized heteroatom-doping amounts of Zr and N doping improve intrinsic properties on enlarging lattice distance and enhancing electronic conductivity,respectively.Specifically,among all samples of Na_(3) V_(2-x)Zr_(x)(PO_(4))_(2) F_(3)/NC(NVPF-Zr-x/NC,x=0,0.01,0.02,0.05,and 0.1),the optimized electrode of NVPF-Zr-0.02/NC delivers high reversible capacities(119.2 mAh g^(-1) at0.5 C),superior rate capability(98.1 mA h g^(-1) at 20 C)and excellent cycling performance.The structural evolution of NVPF-Zr-0.02/NC electrode,in-situ monitored by X-ray diffractometer,follows a step-wise Na-extraction/intercalation mechanism with reversible multi-phase changes,not just a solid-solutionreaction one.Full cells of NVPF-Zr-0.02/NC//hard carbon demonstrate high capacity(99.8 mA h g^(-1) at 0.5 C),high out-put voltage(3.5 V)and good cycling stability.This work is favorable to accelerate the development of high-performance cathode materials and explore possible redox reaction mechanisms of SIBs.展开更多
High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS...High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS4-polyethylene oxide is synthesized by the solution-phase reaction method with an improved ionic conductivity up to 9.4 × 10-5 S/cm at room temperature. Moreover, polyethylene oxide polymer layer is wrapped homogeneously on the surface of Na3PS4 particles, which could effectively avoid the direct contact between Na3PS4 electrolyte and sodium metal, thus alleviate their side reactions. We demonstrate that all-solid-state battery SnS2/Na with the composite solid electrolyte Na3PS4-polyethylene oxide delivers an enhanced electrochemical performance with 230 m Ah/g after 40 cycles.展开更多
Sodium-ion batteries (SIBs) have attracted increasing attention in the past decades, because of high over-all abundance of precursors, their even geographical distribution, and low cost. Na3V2(PO4)3 (NVP), atypi...Sodium-ion batteries (SIBs) have attracted increasing attention in the past decades, because of high over-all abundance of precursors, their even geographical distribution, and low cost. Na3V2(PO4)3 (NVP), atypical sodium super ion conductor (NASlCON)-based electrode material, exhibits pronounced structuralstability, exceptionally high ion conductivity, rendering it a most promising electrode for sodium storage.However. the comparatively low electronic conductivity makes the theoretical capacity of NVP cannot befully accessible even at comparatively low rates, presenting a major drawback for further practical ap-plications, especially when high rate capability is especially important. Thus, many endeavors have beenconformed to increase the surface and intrinsic electrical conductivity of NVP by coating the active mate-rials with a conductive carbon layer, downsizing the NVP particles, combining the NVP particle with vari-ous carbon materials and ion doping strategy. In this review, to get a better understanding on the sodiumstorage in NVP, we firstly present 4 distinct crystal structures in the temperature range of-30℃-225℃ namely α-NVP, β-NVP, β′-NVP and γ-NVP. Moreover, we give an overview of recent approaches to en-hance the surface electrical conductivity and intrinsic electrical conductivity of NVP. Finally, some poten-tial applications of NVP such as in all-climate environment and PHEV, EV fields have been prospected.展开更多
Na‐O2 batteries are advantageous as the candidates of next‐generation electric vehicles due to their ultrahigh theoretical energy density and have attracted enormous attention recently.Tremendous efforts have been d...Na‐O2 batteries are advantageous as the candidates of next‐generation electric vehicles due to their ultrahigh theoretical energy density and have attracted enormous attention recently.Tremendous efforts have been devoted to improve the Na‐O2 battery performance by designing advanced electrodes with various carbonbased materials.Carbon materials used in Na‐O2 batteries not only function as the air electrode to provide active sites and accommodate discharge products but also as Na anode protectors against dendrite growth and chemical/electrochemical corrosion.In this review,we mainly focus on the application of various carbonbased materials in Na‐O2 batteries and highlight their advances.The scientific understanding on the fundamental design of the material microstructure and chemistry in relation to the battery performance are summarized.Finally,perspectives on enhancing the overall battery performance based on the optimization and rational design of carbon‐based cell components are also briefly anticipated.展开更多
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s...Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal (Na, K) oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.展开更多
Na_(3)V_(2)(PO_(4))_(3)is considered as one of the most promising cathodes for sodium ion batteries due to its excellent thermal stability,long cycle life and high energy density.However,the inferior intrinsic electro...Na_(3)V_(2)(PO_(4))_(3)is considered as one of the most promising cathodes for sodium ion batteries due to its excellent thermal stability,long cycle life and high energy density.However,the inferior intrinsic electronic conductivity which brings about the poor rate capability and cycling performance hinders its commercial application.Herein,the S-N co-doped carbon-coated Na_(3)V_(2)(PO_(4))_(3)(NVP@SNC)has been synthesized to resolve the problem.The prepared NVP@SNC forms a hierarchical structure assembled with nanosheets,which is in favor of the electrolyte infiltration and shortening the Na^(+)transmission distance.Numerous lattice defects can be induced in carbon layer by the co-doped elements(S-N),which reduce the Na^(+)diffusion energy barriers and provide adequate Na^(+)migration channels,thus jointly boosting the Na^(+)diffusion coefficient.Consequently,the NVP@SNC cathode shows a high reversible capacity with outstanding rate performance and super long-cycle stability.When discharged at 2.0C,it delivers the capacity near to the theoretical value with a capacity retention of 88.7%after 400cycles.Even if the current is as high as 50.0C,a high capacity of 58.6 mAh·g^(-1)has been released,and41.4 mAh·g^(-1)has been remained after the super long cycling of 4000 circles.This study is expected to supply a new thought of developing high-performance cathodes by diatomic doping for sodium ion battery.展开更多
Na superionic conductor (NASICON)-type Na3V2(PO4)3 (NVP) has been regarded as a promising cathode material for sodium-ion batteries (SIBs). However, NVP suffers from poor cyclability and rate capability because of its...Na superionic conductor (NASICON)-type Na3V2(PO4)3 (NVP) has been regarded as a promising cathode material for sodium-ion batteries (SIBs). However, NVP suffers from poor cyclability and rate capability because of its intrinsically low electronic conductivity. Herein, we successfully syn thesized N-doped carb on-wrapped Na3V2(PO4)3 (NC@NVP) through the carb on izati on of polydopami ne, which is rich in nitrogen species. The strong adhesion properties of the polydopamine lead to effective and homogeneous wrapping of NVP particles, and it I is further turned into a con ductive N-doped carb on n etwork itself, providi ng facile diffusi on of electr ons and Na+ i ons duri ng battery operation. NC@NVP displays remarkable electrochemical performanee, even under harsh operating conditions, such as a high rate capability (discharge capacity of 70.88, 49.21 mA·h·g^-1 at 50 and 100 C), long-term cycling stability (capacity retention of 94.77% over 1,000 cycles at 20 C), and high-temperature cycling (capacity retention of 92.0% after 500 cycles at 60 ℃).展开更多
As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide (MoS2) is considered a potential anode material for sodium-ion batteries (NIBs), due to its relatively high theoretical capacity ...As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide (MoS2) is considered a potential anode material for sodium-ion batteries (NIBs), due to its relatively high theoretical capacity (~ 670 mAh·g--1). However, the low electrical conductivity of MoS2 and its dramatic volume change during charge/discharge lead to severe capacity degradation and poor cycling stability. In this work, we developed a facile, scalable, and effective synthesis method to embed nanosized MoS2 into a thin film of three-dimensional (3D)-interconnected carbon nanofibers (CNFs), producing a MoS2/CNFs film. The free-standing MoS2/CNFs thin film can be used as anode for NIBs without additional binders or carbon black. The MoS2/CNFs electrode exhibits a high reversible capacity of 260 mAh·g^-1, with an extremely low capacity loss of 0.05 mAh·g^-1 per cycle after 2,600 cycles at a current density of 1 A·g^-1. This enhanced sodium storage performance is attributed to the synergistic effect and structural advantages achieved by embedding MoS2 in the 3D-interconnected carbon matrix.展开更多
In this study,a pseudo-layered Na super-ionic conductor of Na3V2(PO4)2F3 (NVPF)/C cathode for sodium-ion batteries is prepared successfully using a facile polyol refluxing process without any impurity phases.The X-ray...In this study,a pseudo-layered Na super-ionic conductor of Na3V2(PO4)2F3 (NVPF)/C cathode for sodium-ion batteries is prepared successfully using a facile polyol refluxing process without any impurity phases.The X-ray diffraction and Rietveld refinement results confirm that NVPF possesses tetragonal NASICON-type lattice with a space group of P42/mnm.In this preparative method,polyol is utilized as a solvent as well as a carbon source.The presence of nanosized NVPF particles in the carbon network is confirmed by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM).The existence of carbon is analyzed by Raman scattering and elemental analysis.When applied as a Na-storage material in a potential window of 2.0-4.3 V,the electrode exhibits two flat voltage plateaus at 3.7 and 4.2 V with an electrochemically active V^3+/V^4+ redox couple.In addition,Na3V2(PO4)2F3/C composite achieved a retention capacity of ~ 88% even after 1,500 cycles at 15 C.Moreover,at high current densities of 30 and 50 C,Na3V2(PO4)2F3/C cathode retains the specific discharge capacities of 108.4 and 105.9 mAh·g-1,respectively,revealing the structural stability of the material prepared through a facile polyol refluxing method.展开更多
Cathodes with high cycling stability and rate capability are required for ambient temperature sodium ion batteries in renewable energy storage application.Na3V2(PO4)3 is an attractive cathode material with excellent e...Cathodes with high cycling stability and rate capability are required for ambient temperature sodium ion batteries in renewable energy storage application.Na3V2(PO4)3 is an attractive cathode material with excellent electrochemical stability and fast ion diffusion coefficient within the 3D NASICON structure.Nevertheless,the practical application of Na3V2(PO4)3 is seriously hindered by its intrinsically poor electronic conductivity.Herein,solvent evaporation method is presented to obtain the nitrogen-doped carbon coated Na3V2(PO4)3 cathode material,delivering cnhanced clectrochemical performances.N-Doped carbon layer coating servfes as a highly conducting pathway,and creates numerous extrinsic defects and active sites,which can facilitate the storage and diffusion of Na^+.Morcover,the N-doped carbon layer can provide a stable framework to accommodate the agglomeration of the electrode upon electrode cycling.N-Doped carbon coated Na3V2(PO4)3(NC-NVP)exhibits excellent long cycling life and superior rate performances than bare Na3V2(PO4)3 without carbon coating.NC-NVP delivers a stable capacity of 95.9mA·h/g after 500 cycles at 1C rate,which corresponds to high capacity retention(94.6%)with respect to the initial capacity(101.4mA·h/g).Over 91.3% of the initial capacity is retained after 500 cycles at 5C,and the capacity can reach 85mA·h/g at 30C rate.展开更多
The rational assembly of quantum dots on two-dimensional(2 D) carbonaceous materials is very promising to produce materials, but remains a challenge. Here, we develop an assembly strategy of growing Na3 V2(PO4)3 quant...The rational assembly of quantum dots on two-dimensional(2 D) carbonaceous materials is very promising to produce materials, but remains a challenge. Here, we develop an assembly strategy of growing Na3 V2(PO4)3 quantum dots with superlattice structure(NVP-QDs-SL) for obtaining precise control of the size, distribution and crystallinity. The multifunctional lignocelluloses(LCs) used as a hard carbon source induce heterogeneous nucleation and confined growth of NVP-QDs-SL, leading to the uniform distribution of NVP-QDs-SL in H/S-doped hard carbon ultra-thin nanosheets(HCS). Detailed electrochemical analysis results from sodium-ion batteries of NVP-QDs-SL show that NVP-QDs-SL could trap the electrons inside HCS, significantly enhancing Na ion storage and transfer kinetics. Compared to the common Na3 V2(PO4)3 nanoparticle cathode, the NVP-QDs-SL/HCS cathode exhibits a high reversible capacity of 149.2 m A h g^-1 at a 0.1 C rate, which is far beyond the theoretical capacity of Na3 V2(PO4)3(117.6 m A h g^-1).At the ultrahigh current rate of 100 C, this cathode still remains a high discharge capacity of 40 m A h g-1.Even after cycling at 20 C over 3000 cycles, an ultrahigh coulombic efficiency close to 100% is still obtained,highlighting its excellent long cycling life, remarkable rate performance and energy density.展开更多
基金supported by the National Natural Science Foundation of China(52172201,51732005,51902118,and 52102249)the China Postdoctoral Science Foundation(2019M662609and 2020T130217)for financial support。
文摘Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.EC is also the most widely used electrolyte solvent in sodium ion batteries.However,compared to lithium metal,sodium metal(Na)shows higher activity and reacts violently with EC-based electrolyte(NaPF_(6)as solute),which leads to the failure of sodium metal batteries(SMBs).Herein,we reveal the electrochemical instability mechanism of EC on sodium metal battery,and find that the com-bination of EC and NaPF_(6) is electrically reduced in sodium metal anode during charging,resulting in the reduction of the first coulombic efficiency,and the continuous consumption of electrolyte leads to the cell failure.To address the above issues,an additive modified linear carbonate-based electrolyte is provided as a substitute for EC based electrolytes.Specifically,ethyl methyl carbonate(EMC)and dimethyl carbon-ate(DMC)as solvents and fluoroethylene carbonate(FEC)as SEI-forming additive have been identified as the optimal solvent for NaFP_(6)based electrolyte and used in Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))/Na batteries.The batter-ies exhibit excellent capacity retention rate of about 80%over 1000 cycles at a cut-off voltage of 4.3 V.
文摘Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation during sodium ion de-intercalation and the main frame mechanism remains unchanged,and thus is seen as an energy storage material for a wide range of applications,but has a limited electronic conductivity due to its structure.In this paper,NVP cathode materials with finer primary particles are successfully prepared using a simple hydrothermal treatment-assisted sol-gel method.The increased pore size of the NVP materials prepared under the hydrothermal process allows for more active sites and more effective resistance to the volume deformation of sodium ions during insertion/extraction processes,effectively facilitating the diffusion of ions and electrons.The Na_(3)V_(2)(PO_(4))_(3) material obtained by the optimized process exhibited good crystallinity in XRD characterization,as well as superior electrochemical properties in a series of electrochemical tests.A specific capacitance of 106.3 mAh g^(-1) at 0.2 C is demonstrated,compared to 96.5 mAh g^(-1) for Na_(3)V_(2)(PO_(4))_(3) without hydrothermal treatment,and cycling performance is also improved with 93%capacity retention.The calculated sodium ion diffusion coefficient(DNa=5.68×10^(-14))obtained after EIS curve fitting of the improved sample illustrates that the pore structure is beneficial to the performance of the Na_(3)V_(2)(PO_(4))_(3)cathode material.
基金the National Natural Science Foundation of China(21975154)the Shanghai Municipal Education Commission(Innovation Program(2019-01-07-00-09E00021)+2 种基金Innovative Research Team of High-level Local Universities in Shanghaisupported by The Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher LearningShanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power。
文摘With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges on its poor intrinsic electronic conductivity and the controversial de/sodiation mechanism.Herein,a series of Zr-doped NVPF coated by N-doped carbon layer(~5 nm in thickness,homogenously)materials are fabricated by a sol-gel method,and the optimized heteroatom-doping amounts of Zr and N doping improve intrinsic properties on enlarging lattice distance and enhancing electronic conductivity,respectively.Specifically,among all samples of Na_(3) V_(2-x)Zr_(x)(PO_(4))_(2) F_(3)/NC(NVPF-Zr-x/NC,x=0,0.01,0.02,0.05,and 0.1),the optimized electrode of NVPF-Zr-0.02/NC delivers high reversible capacities(119.2 mAh g^(-1) at0.5 C),superior rate capability(98.1 mA h g^(-1) at 20 C)and excellent cycling performance.The structural evolution of NVPF-Zr-0.02/NC electrode,in-situ monitored by X-ray diffractometer,follows a step-wise Na-extraction/intercalation mechanism with reversible multi-phase changes,not just a solid-solutionreaction one.Full cells of NVPF-Zr-0.02/NC//hard carbon demonstrate high capacity(99.8 mA h g^(-1) at 0.5 C),high out-put voltage(3.5 V)and good cycling stability.This work is favorable to accelerate the development of high-performance cathode materials and explore possible redox reaction mechanisms of SIBs.
基金funding support from 1000 Talent Plan program(NO.31370086963030)research projects from Shandong Province(2018JMRH0211,2017CXGC1010 and 2016GGX104001)+2 种基金Taishan Scholar Program(11370085961006)the National Science Foundation of Shandong Province(ZR2017MEM002)the Fundamental Research Funds of Shandong University(201810422046,2017JC010,2017JC042,and 2016JC005)。
文摘High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS4-polyethylene oxide is synthesized by the solution-phase reaction method with an improved ionic conductivity up to 9.4 × 10-5 S/cm at room temperature. Moreover, polyethylene oxide polymer layer is wrapped homogeneously on the surface of Na3PS4 particles, which could effectively avoid the direct contact between Na3PS4 electrolyte and sodium metal, thus alleviate their side reactions. We demonstrate that all-solid-state battery SnS2/Na with the composite solid electrolyte Na3PS4-polyethylene oxide delivers an enhanced electrochemical performance with 230 m Ah/g after 40 cycles.
基金financial support from the National Natural Science Foundation of China (No.21501171,51403209,21406221,51177156/E0712)
文摘Sodium-ion batteries (SIBs) have attracted increasing attention in the past decades, because of high over-all abundance of precursors, their even geographical distribution, and low cost. Na3V2(PO4)3 (NVP), atypical sodium super ion conductor (NASlCON)-based electrode material, exhibits pronounced structuralstability, exceptionally high ion conductivity, rendering it a most promising electrode for sodium storage.However. the comparatively low electronic conductivity makes the theoretical capacity of NVP cannot befully accessible even at comparatively low rates, presenting a major drawback for further practical ap-plications, especially when high rate capability is especially important. Thus, many endeavors have beenconformed to increase the surface and intrinsic electrical conductivity of NVP by coating the active mate-rials with a conductive carbon layer, downsizing the NVP particles, combining the NVP particle with vari-ous carbon materials and ion doping strategy. In this review, to get a better understanding on the sodiumstorage in NVP, we firstly present 4 distinct crystal structures in the temperature range of-30℃-225℃ namely α-NVP, β-NVP, β′-NVP and γ-NVP. Moreover, we give an overview of recent approaches to en-hance the surface electrical conductivity and intrinsic electrical conductivity of NVP. Finally, some poten-tial applications of NVP such as in all-climate environment and PHEV, EV fields have been prospected.
基金University of Western OntarioCanada Foundation for Innovation+2 种基金Canada Research Chair ProgramNational Sciences and Engineering Research Council of CanadaChinese Scholarship Council。
文摘Na‐O2 batteries are advantageous as the candidates of next‐generation electric vehicles due to their ultrahigh theoretical energy density and have attracted enormous attention recently.Tremendous efforts have been devoted to improve the Na‐O2 battery performance by designing advanced electrodes with various carbonbased materials.Carbon materials used in Na‐O2 batteries not only function as the air electrode to provide active sites and accommodate discharge products but also as Na anode protectors against dendrite growth and chemical/electrochemical corrosion.In this review,we mainly focus on the application of various carbonbased materials in Na‐O2 batteries and highlight their advances.The scientific understanding on the fundamental design of the material microstructure and chemistry in relation to the battery performance are summarized.Finally,perspectives on enhancing the overall battery performance based on the optimization and rational design of carbon‐based cell components are also briefly anticipated.
文摘Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal (Na, K) oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.
基金Projects(21671200,21571189)supported by the National Natural Science Foundation of ChinaProjects(2016TP1007,2017TP1001)supported by the Hunan Provincial Science and Technology Plan Project of China+1 种基金Project(2017CL17)supported by the Opening Project of Material Corrosion and Protection Key Laboratory of Sichuan Province,ChinaProject(2016CXS009)supported by Innovation-Driven Project of Central South University,China
基金financially supported by the National Natural Science Foundation of China(Nos.11964010,11464014,51862008,52064014,52064013)the Natural Science Foundation of Hunan Province(No.2020JJ4495)the Youth Program of Hunan Provincial Education Department(No.21B0522)。
文摘Na_(3)V_(2)(PO_(4))_(3)is considered as one of the most promising cathodes for sodium ion batteries due to its excellent thermal stability,long cycle life and high energy density.However,the inferior intrinsic electronic conductivity which brings about the poor rate capability and cycling performance hinders its commercial application.Herein,the S-N co-doped carbon-coated Na_(3)V_(2)(PO_(4))_(3)(NVP@SNC)has been synthesized to resolve the problem.The prepared NVP@SNC forms a hierarchical structure assembled with nanosheets,which is in favor of the electrolyte infiltration and shortening the Na^(+)transmission distance.Numerous lattice defects can be induced in carbon layer by the co-doped elements(S-N),which reduce the Na^(+)diffusion energy barriers and provide adequate Na^(+)migration channels,thus jointly boosting the Na^(+)diffusion coefficient.Consequently,the NVP@SNC cathode shows a high reversible capacity with outstanding rate performance and super long-cycle stability.When discharged at 2.0C,it delivers the capacity near to the theoretical value with a capacity retention of 88.7%after 400cycles.Even if the current is as high as 50.0C,a high capacity of 58.6 mAh·g^(-1)has been released,and41.4 mAh·g^(-1)has been remained after the super long cycling of 4000 circles.This study is expected to supply a new thought of developing high-performance cathodes by diatomic doping for sodium ion battery.
文摘Na superionic conductor (NASICON)-type Na3V2(PO4)3 (NVP) has been regarded as a promising cathode material for sodium-ion batteries (SIBs). However, NVP suffers from poor cyclability and rate capability because of its intrinsically low electronic conductivity. Herein, we successfully syn thesized N-doped carb on-wrapped Na3V2(PO4)3 (NC@NVP) through the carb on izati on of polydopami ne, which is rich in nitrogen species. The strong adhesion properties of the polydopamine lead to effective and homogeneous wrapping of NVP particles, and it I is further turned into a con ductive N-doped carb on n etwork itself, providi ng facile diffusi on of electr ons and Na+ i ons duri ng battery operation. NC@NVP displays remarkable electrochemical performanee, even under harsh operating conditions, such as a high rate capability (discharge capacity of 70.88, 49.21 mA·h·g^-1 at 50 and 100 C), long-term cycling stability (capacity retention of 94.77% over 1,000 cycles at 20 C), and high-temperature cycling (capacity retention of 92.0% after 500 cycles at 60 ℃).
基金This work was supported by the National Key Research and Development Program of China (No. 2016YFB0100305), the National Natural Science Foundation of China (Nos. 21373195 and 51622210), the Fundamental Research Funds for the Central Universities (No. WK3430000004), and the Collaborative Innovation Center of Suzhou Nano Science and Technology.
文摘As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide (MoS2) is considered a potential anode material for sodium-ion batteries (NIBs), due to its relatively high theoretical capacity (~ 670 mAh·g--1). However, the low electrical conductivity of MoS2 and its dramatic volume change during charge/discharge lead to severe capacity degradation and poor cycling stability. In this work, we developed a facile, scalable, and effective synthesis method to embed nanosized MoS2 into a thin film of three-dimensional (3D)-interconnected carbon nanofibers (CNFs), producing a MoS2/CNFs film. The free-standing MoS2/CNFs thin film can be used as anode for NIBs without additional binders or carbon black. The MoS2/CNFs electrode exhibits a high reversible capacity of 260 mAh·g^-1, with an extremely low capacity loss of 0.05 mAh·g^-1 per cycle after 2,600 cycles at a current density of 1 A·g^-1. This enhanced sodium storage performance is attributed to the synergistic effect and structural advantages achieved by embedding MoS2 in the 3D-interconnected carbon matrix.
文摘In this study,a pseudo-layered Na super-ionic conductor of Na3V2(PO4)2F3 (NVPF)/C cathode for sodium-ion batteries is prepared successfully using a facile polyol refluxing process without any impurity phases.The X-ray diffraction and Rietveld refinement results confirm that NVPF possesses tetragonal NASICON-type lattice with a space group of P42/mnm.In this preparative method,polyol is utilized as a solvent as well as a carbon source.The presence of nanosized NVPF particles in the carbon network is confirmed by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM).The existence of carbon is analyzed by Raman scattering and elemental analysis.When applied as a Na-storage material in a potential window of 2.0-4.3 V,the electrode exhibits two flat voltage plateaus at 3.7 and 4.2 V with an electrochemically active V^3+/V^4+ redox couple.In addition,Na3V2(PO4)2F3/C composite achieved a retention capacity of ~ 88% even after 1,500 cycles at 15 C.Moreover,at high current densities of 30 and 50 C,Na3V2(PO4)2F3/C cathode retains the specific discharge capacities of 108.4 and 105.9 mAh·g-1,respectively,revealing the structural stability of the material prepared through a facile polyol refluxing method.
基金the National Key Research and Development Program of China(Nos.2017YFB0102000,2018YFB0104200)the Central South University Postdoctoral Foundation,China(No.140050018)+3 种基金the National Natural Science Foundation of China(Nos.51904342,51622406,and 21673298)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(CAST)(No.2017QNRC001)the Innovation Mover Program of Central South University,China(Nos.2018CX005,2017CX004)the Hunan Provincial Natural Science Foundation,China(No.2018JJ3633)。
文摘Cathodes with high cycling stability and rate capability are required for ambient temperature sodium ion batteries in renewable energy storage application.Na3V2(PO4)3 is an attractive cathode material with excellent electrochemical stability and fast ion diffusion coefficient within the 3D NASICON structure.Nevertheless,the practical application of Na3V2(PO4)3 is seriously hindered by its intrinsically poor electronic conductivity.Herein,solvent evaporation method is presented to obtain the nitrogen-doped carbon coated Na3V2(PO4)3 cathode material,delivering cnhanced clectrochemical performances.N-Doped carbon layer coating servfes as a highly conducting pathway,and creates numerous extrinsic defects and active sites,which can facilitate the storage and diffusion of Na^+.Morcover,the N-doped carbon layer can provide a stable framework to accommodate the agglomeration of the electrode upon electrode cycling.N-Doped carbon coated Na3V2(PO4)3(NC-NVP)exhibits excellent long cycling life and superior rate performances than bare Na3V2(PO4)3 without carbon coating.NC-NVP delivers a stable capacity of 95.9mA·h/g after 500 cycles at 1C rate,which corresponds to high capacity retention(94.6%)with respect to the initial capacity(101.4mA·h/g).Over 91.3% of the initial capacity is retained after 500 cycles at 5C,and the capacity can reach 85mA·h/g at 30C rate.
基金supported financially by the National Natural Science Foundation of China (Nos. 51672139, 51472127 and 51272144)the Projects Supported by the Key Laboratory of Pulp and Paper Science and Technology of Ministry of Education (No. KF2016-01)
文摘The rational assembly of quantum dots on two-dimensional(2 D) carbonaceous materials is very promising to produce materials, but remains a challenge. Here, we develop an assembly strategy of growing Na3 V2(PO4)3 quantum dots with superlattice structure(NVP-QDs-SL) for obtaining precise control of the size, distribution and crystallinity. The multifunctional lignocelluloses(LCs) used as a hard carbon source induce heterogeneous nucleation and confined growth of NVP-QDs-SL, leading to the uniform distribution of NVP-QDs-SL in H/S-doped hard carbon ultra-thin nanosheets(HCS). Detailed electrochemical analysis results from sodium-ion batteries of NVP-QDs-SL show that NVP-QDs-SL could trap the electrons inside HCS, significantly enhancing Na ion storage and transfer kinetics. Compared to the common Na3 V2(PO4)3 nanoparticle cathode, the NVP-QDs-SL/HCS cathode exhibits a high reversible capacity of 149.2 m A h g^-1 at a 0.1 C rate, which is far beyond the theoretical capacity of Na3 V2(PO4)3(117.6 m A h g^-1).At the ultrahigh current rate of 100 C, this cathode still remains a high discharge capacity of 40 m A h g-1.Even after cycling at 20 C over 3000 cycles, an ultrahigh coulombic efficiency close to 100% is still obtained,highlighting its excellent long cycling life, remarkable rate performance and energy density.