Sodium deoxycholate (NaDOC) could induce 1-bromo-4-(bromoacetyl) naphthalene (BBAN) to emit strong room temperature phosphorescence (RTP). Measurements of phosphore- scence spectra, peak intensity and polarization we...Sodium deoxycholate (NaDOC) could induce 1-bromo-4-(bromoacetyl) naphthalene (BBAN) to emit strong room temperature phosphorescence (RTP). Measurements of phosphore- scence spectra, peak intensity and polarization were used to investigate the solubilization of BBAN as a function of NaDOC concentration.展开更多
A sensitive and simple solid phase extraction method for the simultaneous determination of trace and toxic metals in environmental samples has been reported. The method is based on the adsorption of Zinc, Iron and Cop...A sensitive and simple solid phase extraction method for the simultaneous determination of trace and toxic metals in environmental samples has been reported. The method is based on the adsorption of Zinc, Iron and Copper on SDS-coated alumina nanoparticles, which is also modified with 3-mercapto-D-valine. The retained analyte ions on modified solid phase were eluted using 5 mL of 4 mol·L﹣1 HNO3. The analyte determination was carried out by flame atomic absorption spectrometry. The influences of some metal ion and anions on the recoveries of understudy analyte ion were investigated. The influences of the analytical parameters including pH, ligand and SDS amount, eluting solution (type and concentrations) and sample volume on metal ions recoveries were investigated. The extraction efficiency was > 98% with relative standard deviation lower than 3% the method has been successfully applied for the extraction and determination of these ions content in some real samples. Prepared adsorbent was characterized by SEM and FT-IR measurements.展开更多
This work investigates the inhibitive properties of sodium dodecyl sulphate (SDS) on the corrosion of copper (Cu) in nitric acid using gasometric methods. The inhibition efficiency increases with time and concentratio...This work investigates the inhibitive properties of sodium dodecyl sulphate (SDS) on the corrosion of copper (Cu) in nitric acid using gasometric methods. The inhibition efficiency increases with time and concentration of SDS. The corrosion rate of copper decreases as concentration of SDS increases. Adsorption of the SDS on the surface obeyed the Langmuir adsorption isotherm. The high negative values of the kinetic parameter B suggest that the inhibitor’s effectiveness increases with temperature. The equilibrium constant and the free energy of adsorption of SDS to copper are negative and large. This observation implies that the adsorption mechanism maybe chemisorption. The quantum chemical calculation of copper dodecyl sulphate shows that the energy change in the HOMO-LUMO energy of the moiety is positive and small. This observation implies that the SDS is an efficient inhibitor. The high dipole moment obtained implies that corrosion inhibition of Cu is enhanced by adsorption of SDS and this observation correlates with the observed experimental inhibition efficiency.展开更多
This study is to prepare chitosan beads modified with sodium dodecyl sulfate (SDS) to effectively remove Cr(III) from an aqueous solution. The characterizations of SDS-chitosan by scanning electron microscopy-energy d...This study is to prepare chitosan beads modified with sodium dodecyl sulfate (SDS) to effectively remove Cr(III) from an aqueous solution. The characterizations of SDS-chitosan by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transform-infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) proved the successful synthesis of the adsorbent. The adsorption of Cr(III) on the SDS material was investigated by varying experimental conditions such as pH, contact time and adsorbent dosage. The maximum adsorption capacity of SDS-chitosan for Cr(III) was estimated to be 3.42 mg?g<sup>-1</sup>. The results of adsorption kinetics and isothermal models show that the adsorption process conforms to the pseudo-second-order and Langmuir isotherm models, indicating that the adsorption is single-layer chemical adsorption. Thermodynamic analyses indicate that the adsorption of Cr(III) is an endothermic reaction. These results show that the new adsorbent has obvious application prospect to eliminate Cr(III).展开更多
Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechani...Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.展开更多
目的:建立快速、简便测定鲜牛奶、转基因牛奶和人乳中乳铁蛋白的方法。方法:在对样品脱脂和去除酪蛋白时,水洗乳脂、酪蛋白以提高乳铁蛋白的回收率。通过十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(sodiumdodecyl sulfate-polyacrylamide gel e...目的:建立快速、简便测定鲜牛奶、转基因牛奶和人乳中乳铁蛋白的方法。方法:在对样品脱脂和去除酪蛋白时,水洗乳脂、酪蛋白以提高乳铁蛋白的回收率。通过十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(sodiumdodecyl sulfate-polyacrylamide gel electrophoresis,SDS-PAGE)分离乳清蛋白,薄层扫描法定量。对电泳和薄层扫描的条件进行优化,电泳使用1.0mm×10齿的试样格、分离胶质量浓度12g/mL、分离电压100V、上样量5μL、染色3h、脱色2h;薄层扫描采取锯齿、双波长、透射的扫描方式,Y步长和摆幅宽分别为0.1mm和8mm。结果:可以分离不同来源乳中的乳铁蛋白、α-乳白蛋白和β-乳球蛋白;乳铁蛋白加标回收率分别为104.53%、108.37%,同板精密度RSD值为3.1003%和1.8151%,在100～2000μg/mL范围内呈线性关系,相关系数为0.9988和0.9990。结论:此方法可以用于3种乳中乳铁蛋白的测定。展开更多
甲烷水合物蓄冷量的确定是甲烷水合物蓄冷降温技术实现工业化的关键.为探究SDS对甲烷水合物蓄冷量的影响,根据Clausius-Clapeyron方程及三参数对应态原理,建立甲烷水合物蓄冷量的计算模型.利用可视化水合物蓄冷实验系统,结合定温压力搜...甲烷水合物蓄冷量的确定是甲烷水合物蓄冷降温技术实现工业化的关键.为探究SDS对甲烷水合物蓄冷量的影响,根据Clausius-Clapeyron方程及三参数对应态原理,建立甲烷水合物蓄冷量的计算模型.利用可视化水合物蓄冷实验系统,结合定温压力搜索法测定四组不同SDS浓度体系下甲烷水合物的相平衡条件.依据实验数据和该模型计算得到不同体系、不同相平衡参数下甲烷水合物的蓄冷量.结果表明：甲烷水合物具有较高的蓄冷密度,蓄冷量达40～ 60 k J/mol;甲烷水合物的蓄冷量不但与相平衡条件有关,还与SDS的添加浓度有关.相平衡温度越高、SDS添加浓度越高,甲烷气体生成水合物时蓄冷量越低.该研究为甲烷水合物蓄冷降温系统的研制提供了参考.展开更多
文摘Sodium deoxycholate (NaDOC) could induce 1-bromo-4-(bromoacetyl) naphthalene (BBAN) to emit strong room temperature phosphorescence (RTP). Measurements of phosphore- scence spectra, peak intensity and polarization were used to investigate the solubilization of BBAN as a function of NaDOC concentration.
文摘A sensitive and simple solid phase extraction method for the simultaneous determination of trace and toxic metals in environmental samples has been reported. The method is based on the adsorption of Zinc, Iron and Copper on SDS-coated alumina nanoparticles, which is also modified with 3-mercapto-D-valine. The retained analyte ions on modified solid phase were eluted using 5 mL of 4 mol·L﹣1 HNO3. The analyte determination was carried out by flame atomic absorption spectrometry. The influences of some metal ion and anions on the recoveries of understudy analyte ion were investigated. The influences of the analytical parameters including pH, ligand and SDS amount, eluting solution (type and concentrations) and sample volume on metal ions recoveries were investigated. The extraction efficiency was > 98% with relative standard deviation lower than 3% the method has been successfully applied for the extraction and determination of these ions content in some real samples. Prepared adsorbent was characterized by SEM and FT-IR measurements.
文摘This work investigates the inhibitive properties of sodium dodecyl sulphate (SDS) on the corrosion of copper (Cu) in nitric acid using gasometric methods. The inhibition efficiency increases with time and concentration of SDS. The corrosion rate of copper decreases as concentration of SDS increases. Adsorption of the SDS on the surface obeyed the Langmuir adsorption isotherm. The high negative values of the kinetic parameter B suggest that the inhibitor’s effectiveness increases with temperature. The equilibrium constant and the free energy of adsorption of SDS to copper are negative and large. This observation implies that the adsorption mechanism maybe chemisorption. The quantum chemical calculation of copper dodecyl sulphate shows that the energy change in the HOMO-LUMO energy of the moiety is positive and small. This observation implies that the SDS is an efficient inhibitor. The high dipole moment obtained implies that corrosion inhibition of Cu is enhanced by adsorption of SDS and this observation correlates with the observed experimental inhibition efficiency.
文摘This study is to prepare chitosan beads modified with sodium dodecyl sulfate (SDS) to effectively remove Cr(III) from an aqueous solution. The characterizations of SDS-chitosan by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transform-infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) proved the successful synthesis of the adsorbent. The adsorption of Cr(III) on the SDS material was investigated by varying experimental conditions such as pH, contact time and adsorbent dosage. The maximum adsorption capacity of SDS-chitosan for Cr(III) was estimated to be 3.42 mg?g<sup>-1</sup>. The results of adsorption kinetics and isothermal models show that the adsorption process conforms to the pseudo-second-order and Langmuir isotherm models, indicating that the adsorption is single-layer chemical adsorption. Thermodynamic analyses indicate that the adsorption of Cr(III) is an endothermic reaction. These results show that the new adsorbent has obvious application prospect to eliminate Cr(III).
文摘Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.
文摘目的:建立快速、简便测定鲜牛奶、转基因牛奶和人乳中乳铁蛋白的方法。方法:在对样品脱脂和去除酪蛋白时,水洗乳脂、酪蛋白以提高乳铁蛋白的回收率。通过十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(sodiumdodecyl sulfate-polyacrylamide gel electrophoresis,SDS-PAGE)分离乳清蛋白,薄层扫描法定量。对电泳和薄层扫描的条件进行优化,电泳使用1.0mm×10齿的试样格、分离胶质量浓度12g/mL、分离电压100V、上样量5μL、染色3h、脱色2h;薄层扫描采取锯齿、双波长、透射的扫描方式,Y步长和摆幅宽分别为0.1mm和8mm。结果:可以分离不同来源乳中的乳铁蛋白、α-乳白蛋白和β-乳球蛋白;乳铁蛋白加标回收率分别为104.53%、108.37%,同板精密度RSD值为3.1003%和1.8151%,在100～2000μg/mL范围内呈线性关系,相关系数为0.9988和0.9990。结论:此方法可以用于3种乳中乳铁蛋白的测定。
文摘甲烷水合物蓄冷量的确定是甲烷水合物蓄冷降温技术实现工业化的关键.为探究SDS对甲烷水合物蓄冷量的影响,根据Clausius-Clapeyron方程及三参数对应态原理,建立甲烷水合物蓄冷量的计算模型.利用可视化水合物蓄冷实验系统,结合定温压力搜索法测定四组不同SDS浓度体系下甲烷水合物的相平衡条件.依据实验数据和该模型计算得到不同体系、不同相平衡参数下甲烷水合物的蓄冷量.结果表明：甲烷水合物具有较高的蓄冷密度,蓄冷量达40～ 60 k J/mol;甲烷水合物的蓄冷量不但与相平衡条件有关,还与SDS的添加浓度有关.相平衡温度越高、SDS添加浓度越高,甲烷气体生成水合物时蓄冷量越低.该研究为甲烷水合物蓄冷降温系统的研制提供了参考.
