Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynami...Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.展开更多
According to the tensile failure of rock bolt in weakly cemented soft rock, this paper presents a new segmented anchoring style in order to weaken the cumulative effect of anchoring force associated with the large def...According to the tensile failure of rock bolt in weakly cemented soft rock, this paper presents a new segmented anchoring style in order to weaken the cumulative effect of anchoring force associated with the large deformation. Firstly, a segmented mechanical model was established in which free and anchoring section of rock bolt were respectively arranged in different deformation zones. Then, stress and displacement in elastic non-anchoring zone, elastic anchoring zone, elastic sticking zone, softening sticking zone and broken zone were derived respectively based on neural theory and tri-linear strain softening constitutive model of soft rock. Results show that the anchoring effect can be characterized by a supporting parameter b. With its increase, the peak value of tangential stress gradually moves to the roadway wall, and the radial stress significantly increases, which means the decrease of equivalent plastic zone and improvement of confining effect provided by anchorage body. When b increases to 0.72, the equivalent plastic zone disappears, and stresses tend to be the elastic solutions. In addition, the anchoring effect on the displacement of surrounding rock can be quantified by a normalization factor δ.展开更多
A series of butylene terephthalate-E-caprolactone copolyesters (BCL) with different hard segment content were successfully synthesized and characterized by 1H-NMR. DSC. PLM and U viscometer, The sequence structure and...A series of butylene terephthalate-E-caprolactone copolyesters (BCL) with different hard segment content were successfully synthesized and characterized by 1H-NMR. DSC. PLM and U viscometer, The sequence structure and crystallization characteristics of BCL copolyesters were carefully investigated.展开更多
Six kinds of polyurethane （PU） elastomers were prepared based on different polyesters, polyethers and chain extenders. The structure, mechanical properties and cold resistant properties of PU were systematically inv...Six kinds of polyurethane （PU） elastomers were prepared based on different polyesters, polyethers and chain extenders. The structure, mechanical properties and cold resistant properties of PU were systematically investigated by FTIR, XRD, DMTA,universal testing machine and flex ductility machine. The results show that Tg of soft segment is the main factor of the cold resistant properties of polyurethane elastomer. Compared with the same relative molecular mass of the polyester and the polyether, the polyether flexibility is better, the glass transition temperature （Tg） is lower and the cold resistant properties is remarkable, for example the cold resistant properties of PU based on poly （tetramethylene glycol）, 1, 4-BG and MDI achieves the fifth level. The physics performances of polyurethane elastomers, such as breakdown strength, Young＇s modulus and the cold resistant properties, are all superior.展开更多
文摘Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.
基金Financial support for this work was provided by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents of China(No.2015RCJJ042)the National Natural Science Foundation of China(Nos.41472280,51274133)+1 种基金the Promotive Research Fund for Excellent Young and Middle-aged Scientisits of Shandong Province of China(No.BS2015SF005)the Opening Project Fund of Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation(No.CDPM2013KF05)
文摘According to the tensile failure of rock bolt in weakly cemented soft rock, this paper presents a new segmented anchoring style in order to weaken the cumulative effect of anchoring force associated with the large deformation. Firstly, a segmented mechanical model was established in which free and anchoring section of rock bolt were respectively arranged in different deformation zones. Then, stress and displacement in elastic non-anchoring zone, elastic anchoring zone, elastic sticking zone, softening sticking zone and broken zone were derived respectively based on neural theory and tri-linear strain softening constitutive model of soft rock. Results show that the anchoring effect can be characterized by a supporting parameter b. With its increase, the peak value of tangential stress gradually moves to the roadway wall, and the radial stress significantly increases, which means the decrease of equivalent plastic zone and improvement of confining effect provided by anchorage body. When b increases to 0.72, the equivalent plastic zone disappears, and stresses tend to be the elastic solutions. In addition, the anchoring effect on the displacement of surrounding rock can be quantified by a normalization factor δ.
文摘A series of butylene terephthalate-E-caprolactone copolyesters (BCL) with different hard segment content were successfully synthesized and characterized by 1H-NMR. DSC. PLM and U viscometer, The sequence structure and crystallization characteristics of BCL copolyesters were carefully investigated.
基金Funded by the Key Laboratory of Enviroment-friendly Polymer Materials of Anhui ProvinceNational Laboratory for Physical Sciences at the Microscale and Anli Artificial Leather co. ltd, China
文摘Six kinds of polyurethane （PU） elastomers were prepared based on different polyesters, polyethers and chain extenders. The structure, mechanical properties and cold resistant properties of PU were systematically investigated by FTIR, XRD, DMTA,universal testing machine and flex ductility machine. The results show that Tg of soft segment is the main factor of the cold resistant properties of polyurethane elastomer. Compared with the same relative molecular mass of the polyester and the polyether, the polyether flexibility is better, the glass transition temperature （Tg） is lower and the cold resistant properties is remarkable, for example the cold resistant properties of PU based on poly （tetramethylene glycol）, 1, 4-BG and MDI achieves the fifth level. The physics performances of polyurethane elastomers, such as breakdown strength, Young＇s modulus and the cold resistant properties, are all superior.
