Ethyl methacrylate (EMA) doped with luminescent ternary terbium complex (Tb(acac) 3·dam) with acetylacetone (Hacac) and diantipylmethane (dam) was incorporated into the microporous silica gel. With the polymeriz...Ethyl methacrylate (EMA) doped with luminescent ternary terbium complex (Tb(acac) 3·dam) with acetylacetone (Hacac) and diantipylmethane (dam) was incorporated into the microporous silica gel. With the polymerization of EMA, the hybrid material containing Tb(acac) 3·dam was obtained. The hybrid material exhibited good toughness and transparency and higher thermal stability than that of the pure complex and pure polymer matrix. In the range of doping concentration of Tb(acac) 3·dam (0.05%, 0.1%, 0.2%, 0.5%, 1.0%, 2.0% and 5.0%), emission intensity increases with the increasing of corresponding doping concentration and concentration quenching effect has not taken place.展开更多
The rare earth complex Eu(TTA) 3 was successfully encapsulated into MCM 41 mesoporous molecular sieve by the addition of the complex into the sol gel mixture for the synthesis of MCM 41 mesoporous material under m...The rare earth complex Eu(TTA) 3 was successfully encapsulated into MCM 41 mesoporous molecular sieve by the addition of the complex into the sol gel mixture for the synthesis of MCM 41 mesoporous material under microwave radiation. The as synthesized MCM 41 hosted Eu(TTA) 3 mesophase was confirmed to possess hexagonally ordered mesostructure and a uniform crystal size of about 30 nm with XRD and HRTEM techniques. Moreover, the IR spectrum, photoluminescence effect and fluorescence lifetime of the Eu(TTA) 3/MCM 41 hybrid were also studied. An increase in Stokes' shift and no change in luminescence lifetime were observed to the resultant mesophase in comparison with Eu(TTA) 3 in ethanol solution.展开更多
With InCl 3·4H 2O being used as raw materials, the precursor of nano sized In 2O 3 powder was prepared by hydrolysis, peptization and gelation of InCl 3·4H 2O. After calcination, nano sized In 2O 3...With InCl 3·4H 2O being used as raw materials, the precursor of nano sized In 2O 3 powder was prepared by hydrolysis, peptization and gelation of InCl 3·4H 2O. After calcination, nano sized In 2O 3 powder was obtained. The powder was characterized by thermo gravimetric and differential thermal analysis (TG DTA), X ray diffractometry (XRD) and transmission electron microscopy (TEM), respectively. Calculation revealed that the mean crystalline size increased with increasing the calcination temperature, but crystal lattice distortion rate decreased with the increasing in the average crystalline size. This indicated that the smaller the particle size, the bigger the crystal lattice distortion, the worse the crystal growing. The activation energies for growth of nano sized In 2O 3 were calculated to be 4.75 kJ·mol -1 at the calcination temperature up to 500℃ and 66.40 kJ·mol -1 at the calcination temperature over 600℃. TEM photos revealed that the addition of the chemical additive (OP-10) greatly influenced the morphology and size of In 2O 3 particles.展开更多
Ru Sn binary oxide is one of the most frequently used anode coating material in electrochemical industry, but its composition distribution and microstructure are not homogeneous, so the nanoscale RuO 2 SnO 2 binary ox...Ru Sn binary oxide is one of the most frequently used anode coating material in electrochemical industry, but its composition distribution and microstructure are not homogeneous, so the nanoscale RuO 2 SnO 2 binary oxide was prepared for improvement by a sol gel technique. The morphology, microstructure, crystal structure and other properties of the new oxide were studied by EPMA, DTA,XRD,TEM, and electrochemical analysis. The results showed that the Ru Sn oxide nanomaterial has excellent electrocatalytical properties.展开更多
This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & sil...This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.展开更多
文摘Ethyl methacrylate (EMA) doped with luminescent ternary terbium complex (Tb(acac) 3·dam) with acetylacetone (Hacac) and diantipylmethane (dam) was incorporated into the microporous silica gel. With the polymerization of EMA, the hybrid material containing Tb(acac) 3·dam was obtained. The hybrid material exhibited good toughness and transparency and higher thermal stability than that of the pure complex and pure polymer matrix. In the range of doping concentration of Tb(acac) 3·dam (0.05%, 0.1%, 0.2%, 0.5%, 1.0%, 2.0% and 5.0%), emission intensity increases with the increasing of corresponding doping concentration and concentration quenching effect has not taken place.
文摘The rare earth complex Eu(TTA) 3 was successfully encapsulated into MCM 41 mesoporous molecular sieve by the addition of the complex into the sol gel mixture for the synthesis of MCM 41 mesoporous material under microwave radiation. The as synthesized MCM 41 hosted Eu(TTA) 3 mesophase was confirmed to possess hexagonally ordered mesostructure and a uniform crystal size of about 30 nm with XRD and HRTEM techniques. Moreover, the IR spectrum, photoluminescence effect and fluorescence lifetime of the Eu(TTA) 3/MCM 41 hybrid were also studied. An increase in Stokes' shift and no change in luminescence lifetime were observed to the resultant mesophase in comparison with Eu(TTA) 3 in ethanol solution.
文摘With InCl 3·4H 2O being used as raw materials, the precursor of nano sized In 2O 3 powder was prepared by hydrolysis, peptization and gelation of InCl 3·4H 2O. After calcination, nano sized In 2O 3 powder was obtained. The powder was characterized by thermo gravimetric and differential thermal analysis (TG DTA), X ray diffractometry (XRD) and transmission electron microscopy (TEM), respectively. Calculation revealed that the mean crystalline size increased with increasing the calcination temperature, but crystal lattice distortion rate decreased with the increasing in the average crystalline size. This indicated that the smaller the particle size, the bigger the crystal lattice distortion, the worse the crystal growing. The activation energies for growth of nano sized In 2O 3 were calculated to be 4.75 kJ·mol -1 at the calcination temperature up to 500℃ and 66.40 kJ·mol -1 at the calcination temperature over 600℃. TEM photos revealed that the addition of the chemical additive (OP-10) greatly influenced the morphology and size of In 2O 3 particles.
文摘Ru Sn binary oxide is one of the most frequently used anode coating material in electrochemical industry, but its composition distribution and microstructure are not homogeneous, so the nanoscale RuO 2 SnO 2 binary oxide was prepared for improvement by a sol gel technique. The morphology, microstructure, crystal structure and other properties of the new oxide were studied by EPMA, DTA,XRD,TEM, and electrochemical analysis. The results showed that the Ru Sn oxide nanomaterial has excellent electrocatalytical properties.
文摘This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.
