Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy

Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84.

Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates

Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.

A Solid Phase Synthesis of Chalcones by Claisen-Schmidt Condensations

In order to accelerate the development of relatively inexpensive antimalarials that are effective against chloroquine-resistant strains of Plasmodium falciparum, a methodology for the solid phase synthesis of chalcone (1, 3-diphenyl-2-propen-1-one) analogues in reasonably high yields has been developed.

A Facile Solid-phase Synthesis of 3-Carboxycoumarins

Carboxycoumsrins were synthesized via the solid phase synthesis conviently. The resin bound cyclic malonic ester reacted with o-methoxy or o-hydroxybenzaldehydes. Then cyclization was processed under H2SO4 to afford the products in excellent purities and yields.

Solid-phase synthesis of Cu2MoS4 nanoparticles for degradation of methyl blue under a halogen-tungsten lamp

The Cu_2MoS_4 nanoparticles were prepared using a relatively simple and convenient solid-phase process, which was applied for the first time. The crystalline structure, morphology, and optical properties of Cu_2MoS_4 nanoparticles were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and UV-vis spectrophotometry. Cu_2MoS_4 nanoparticles having a band gap of 1.66 eV exhibits good photocatalytic activity in the degradation of methylene blue, which indicates that this simple process may be critical to facilitate the cheap production of photocatalysts.

Synthesis of a highly hydrophobic cyclic decapeptide by solid-phase synthesis of linear peptide and cyclization in solution

A general method was described to synthesize a highly hydrophobic cyclic peptide,cyclo[LWLWLWLWLQ]where underlines indicate D-configuration of the amino acid,by a two-step solid-phase/solution synthesis strategy.The linear decapeptide was assembled by standard Boc chemistry on solid-phase and subsequently cyclized in solution with high efficiency and reproducibility. In subsequent purification by semi-preparative HPLC,50%(v/v) DMF/H_2O was employed as the solvent to overcome the difficulty of solubilization...

Synthesis of dimethyl carbonate by gas-phase oxidative carbonylation of methanol in the presence of solid catalyst I. Catalyst preparation and catalytic Properties

The gas-phase synthesis of dimethyl carbonate (DMC) from methanol, carbon monoxide and oXygen has here Studied in a flow system at atomspheric Pressure. A series of Catalyst used in this reaCtion have been prepared and evaluated. The influence of trivared carbon supporters, alkaline metal Promoters and operation conditions on DMC opthesis reaction has been discussed. Under the conditions of 130℃, CO/O2=1 .96, SV=3340h-1, the space-time yield (STY) of DMC over PdCl2-CuCl2-CH3COOK/ac. catalyst is 217g/l-cat h,which is higher than what is published in the literatUre so far.

Solid-phase Synthesis of PNA Monomer by Ugi Four-component Condensation Reaction

Peptide nucleic acids (PNA) oligomers were synthesized in most cases by peptide synthesis from N-protected monomers. In this work a new method of obtaining PNA monomer by Ugi four-component condensation reaction was tested by solid-phase synthesis. The Fmoc protected PNA monomer was build up with thymin-1-yl acetic acid, 3-methylbutyl aldehyde, Fmoc protected aminoethyl isocyanide and Gly-Wang resin.

Solid-phase Synthesis of Acyl-plasminogen-Streptokinase Activator Composite(APSAC) and Its Thrombolytic Properties

The dialysis method has been traditionally used for the conversion of native human plasminogen(Glu-Hpg) to lys-plasminogen(Lys-Hpg). Here is described a solid-phase synthesis method for the preparation of an acyl-plasminogen-streptokinase activator complex(APSAC) from Lys-Hpg, streptokinase(SK) and chemical modification (agent(4-amidinophenyl-4′-aminobenzoate hydrochloride)) with the L-lysine-Sepharose 4B Column as the carrier. The new method significantly increases the product yield and purity over the liquid-phase methods. The APSAC prepared with the new method exhibits a significant thrombolytic effect with a long half-life of about 8.8 h in rabbits.

Solid-phase Synthesis of-Haloaldehydes from Polymer-supported 4-(Phenylseleno)morpholine

Polystyrene-supported 4-(phenylseleno)morpholine was synthesized and could be used as an efficient ?selenenylating agent for saturated aldehydes. ?Haloaldehydes were prepared by reaction of polystyrene-supported ?selenoaldehydes with bromine or sulfuryl chloride in good yield and high purity.

Solid-Phase Stereoselective Synthesis of (E)-1, 2-Disubstituted Ethenes from Polymer-Sopported a-Selenoaldehydes

Reaction of polymer-supported a-selenoaldehydes with Grignard reagents afforded polymer-bound B-hydroxyalkyl selenides, which treated with thionyl chloride and triethylamine leading to (E)-1, 2-disubstituted ethenes in good yield.

Solid Phase Synthesis of β-Carbolines

Synthesis of β-carbolines on solid phase using TCCA as the key reagent is developed.

Solid-Phase Synthesis of Acrylamide Using Polymer-Supported β-Selenopropionic Acid

A novel polystyrene-supported ?selenopropionic acid has been developed and applied to facile synthesis of acrylamides.

Traceless solid-phase synthesis of 3-substituted isoxazoles from polystyrene-supported vinyl selenide

A novel facile procedure for traceless solid-phase synthesis of 3-substituted isoxazoles in good yields and with excellent purities using polymer-supported vinyl selenide has been developed.

Solid Phase Synthesis of 4(1H)Quinolones from Resin-Bound Cyclic Malonic Ester

The solid phase synthesis of 4 (1H) quinolones has been reported.

Solid-phase synthesis of (Z)-allyl iodides from 3-acetoxy-2-methylene-alkanoates with recyclable polymer-supported selenium bromide

Reaction of polystyrene-supported lithium selenide with 3-acetoxy-2-methylene-alkanoates afforded the corresponding allyl selenide resins and subsequent cleavage from the polymer by treating with methyl iodide to furnish （Z）-allyl iodides in good yields and high purities. The polymeric selenium reagent can be regenerated and reused. So it is a environmentally benign reagent.

Solid-phase Synthesis of Unsaturated β-Dicarbonyl Compounds from Polymer-supported 4-(Phenylseleno)morpholine

The solid-phase synthesis of unsaturated ?dicarbonyl compounds has been reported.

Solid Phase Synthesis of 4H-Pyrimido[2,1-b] Benzothiazol-4-ones from Resin-Bound Cyclic Malonic Ester

The solid phase synthesis of 4H-pyrimido[2,1-b] benzothiazol-4-ones has been reported.

Solid-Phase Total Synthesis of 1-β-Methylcarbapenem

A 1-b-methylcarbapenem analogue 6 was synthesized on polystyrene-diethylsilane resin (PS-DES) using 2-azetidinone bearing with 2-oxazolidone chiral auxiliary as starting material.