The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and parti...The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and particle size analysis methods. It was found that LSMCs were all of single phase and the synthesis process might be divided into three stages: the decomposition of reactants, the formation of LaMn(Co)O 3 based oxides, and the formation of LSMC solid solution. Typical average and the peak value of particle size, and the specific surface area are 14.65?μm, 16.4?μm and 1.38?m 2/mL, respectively, for mixed reactants and are 23.81?μm, 32.11?μm and 0.5?m 2/mL, respectively, for powder synthesized at 1?200?℃ for 8?h in air.展开更多
A mathematical model has been developed to handle the reactions in Poly(ethylene terephthalate) (PET) undergoing polycondensation reactions in the solid state. The effect of temperature on chain mobility was considere...A mathematical model has been developed to handle the reactions in Poly(ethylene terephthalate) (PET) undergoing polycondensation reactions in the solid state. The effect of temperature on chain mobility was considered to estimate the rate constants of chemical reactions. The polymer crystalline fraction is modeled as containing only repeat units, thus concentrating end groups and conden-sates in the amorphous fraction. This model is compared with PET reaction data with good results.展开更多
A new coordination polymer, {[Cd(OPY)(tdc)(HO)]·H2 O}n(OPY = 4,4?-(oxybis(4,1-phenylene))dipyridine, H2 tdc = thiophene-2,5-dicarboxylic acid), has been synthesized hydrothermally based on a V-shaped ligand OPY. ...A new coordination polymer, {[Cd(OPY)(tdc)(HO)]·H2 O}n(OPY = 4,4?-(oxybis(4,1-phenylene))dipyridine, H2 tdc = thiophene-2,5-dicarboxylic acid), has been synthesized hydrothermally based on a V-shaped ligand OPY. The structure was fully characterized by elemental analysis, FT-IR spectroscopy, and X-ray single-crystal diffraction analysis. In1, two OPY ligands and one water molecule acted as terminal ligands coordinating to Cdcation to form [Cd(OPY)HO]units, which are then linked by tdc2-ligands to generate a one-dimensional chain. Every two adjacent chains linked by extensive O–H···O hydrogen bonds constitute one-dimensional double-chains, and such chains are extended into two-dimensional layers via O–H···N hydrogen bonds. These layers are further connected to form a three-dimensional supramolecular architecture via π-π stacking interactions. In addition, the thermal stability and solid state fluorescence property of 1 were also investigated.展开更多
Although tuning band structure of optoelectronic semiconductor-based materials by means of doping single defect is an important approach for potential photocatalysis application,C-doping or oxygen vacancy(Vo)as a sing...Although tuning band structure of optoelectronic semiconductor-based materials by means of doping single defect is an important approach for potential photocatalysis application,C-doping or oxygen vacancy(Vo)as a single defect in ZnO still has limitations for photocatalytic activity.Meanwhile,the influence of co-existence of various defects in ZnO still lacks sufficient studies.Therefore,we investigate the photocatalytic properties of ZnOx C0.0625(x=0.9375,0.875,0.8125),confirming that the co-effect of various defects has a greater enhancement for photocatalytic activity driven by visible-light than the single defect in ZnO.To clarify the underlying mechanism of co-existence of various defects in ZnO,we perform systematically the electronic properties calculations using density functional theory.It is found that the coeffect of C-doping and Vo in ZnO can achieve a more controllable band gap than doping solely in ZnO.Moreover,the impact of the effective masses of ZnO_(x)C_(0.0625)(x=0.9375,0.875,0.8125)is also taken into account.In comparison with heavy Vo concentrations,the light Vo concentration(x=0.875)as the optimal component together with C-doping in ZnO,can significantly improve the visible-light absorption and benefit photocatalytic activity.展开更多
文摘The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and particle size analysis methods. It was found that LSMCs were all of single phase and the synthesis process might be divided into three stages: the decomposition of reactants, the formation of LaMn(Co)O 3 based oxides, and the formation of LSMC solid solution. Typical average and the peak value of particle size, and the specific surface area are 14.65?μm, 16.4?μm and 1.38?m 2/mL, respectively, for mixed reactants and are 23.81?μm, 32.11?μm and 0.5?m 2/mL, respectively, for powder synthesized at 1?200?℃ for 8?h in air.
文摘A mathematical model has been developed to handle the reactions in Poly(ethylene terephthalate) (PET) undergoing polycondensation reactions in the solid state. The effect of temperature on chain mobility was considered to estimate the rate constants of chemical reactions. The polymer crystalline fraction is modeled as containing only repeat units, thus concentrating end groups and conden-sates in the amorphous fraction. This model is compared with PET reaction data with good results.
基金Supported by the National Natural Science Foundation of China(Nos.21361023 and 21461023)
文摘A new coordination polymer, {[Cd(OPY)(tdc)(HO)]·H2 O}n(OPY = 4,4?-(oxybis(4,1-phenylene))dipyridine, H2 tdc = thiophene-2,5-dicarboxylic acid), has been synthesized hydrothermally based on a V-shaped ligand OPY. The structure was fully characterized by elemental analysis, FT-IR spectroscopy, and X-ray single-crystal diffraction analysis. In1, two OPY ligands and one water molecule acted as terminal ligands coordinating to Cdcation to form [Cd(OPY)HO]units, which are then linked by tdc2-ligands to generate a one-dimensional chain. Every two adjacent chains linked by extensive O–H···O hydrogen bonds constitute one-dimensional double-chains, and such chains are extended into two-dimensional layers via O–H···N hydrogen bonds. These layers are further connected to form a three-dimensional supramolecular architecture via π-π stacking interactions. In addition, the thermal stability and solid state fluorescence property of 1 were also investigated.
基金Project supported by the National Natural Science Foundation of China(Grant No.11874038)the State Key Laboratory of Advanced Metallurgy Foundation in China(Grant No.KF19-03)。
文摘Although tuning band structure of optoelectronic semiconductor-based materials by means of doping single defect is an important approach for potential photocatalysis application,C-doping or oxygen vacancy(Vo)as a single defect in ZnO still has limitations for photocatalytic activity.Meanwhile,the influence of co-existence of various defects in ZnO still lacks sufficient studies.Therefore,we investigate the photocatalytic properties of ZnOx C0.0625(x=0.9375,0.875,0.8125),confirming that the co-effect of various defects has a greater enhancement for photocatalytic activity driven by visible-light than the single defect in ZnO.To clarify the underlying mechanism of co-existence of various defects in ZnO,we perform systematically the electronic properties calculations using density functional theory.It is found that the coeffect of C-doping and Vo in ZnO can achieve a more controllable band gap than doping solely in ZnO.Moreover,the impact of the effective masses of ZnO_(x)C_(0.0625)(x=0.9375,0.875,0.8125)is also taken into account.In comparison with heavy Vo concentrations,the light Vo concentration(x=0.875)as the optimal component together with C-doping in ZnO,can significantly improve the visible-light absorption and benefit photocatalytic activity.
