As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we asse...As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.展开更多
Instead of the traditional linear model of taking,making,and disposing,the circular bio-economy promotes a regenerative approach.Although there is potential to create valuable products like betulin,lupeol,and suberini...Instead of the traditional linear model of taking,making,and disposing,the circular bio-economy promotes a regenerative approach.Although there is potential to create valuable products like betulin,lupeol,and suberinic acids(SA)from outer birch bark,many industries,such as plywood and pulp,often choose to incinerate substan-tial amounts of leftover birch bark to meet their energy needs.This highlights the importance of obtaining valu-able products from wood.The objective of this study was to examine various fractions of SA and assess their potential for wood impregnation.The fractions included SA potassium salts in ethanol(SAK-EtOH)and water(SAK-H2O),SA suspension in water(SAS-H2O)and dried SA,which was subsequently diluted in ethanol(DSA-EtOH).There is significant potential for utilizing SA in wood treatment formulations as a sustainable alternative to harmful petroleum-derived chemicals.This approach not only addresses environmental concerns but also enhances the functionality of wood in construction applications,such as improving impregnation for moisture and fungal protection.Among the solutions tested,the ethanol solution of SA,specifically DSA-EtOH,showed the highest weight percent gain(WPG)and the greatest leaching resistance.GPC analysis showed that SA salts in ethanol(SAK-EtOH)and water(SAK-H2O)predominantly consist of low molecular fractions and each process(acidification and drying)reduces the low molecular content in the sample.This suggests that SA polymerizes after drying,making it necessary to dissolve it in ethanol to meet the requirements for impregnation.Further opti-mization,including adjustments in the concentration of the SA ethanol solution and the curing temperature,is essential to identify the optimal conditions for more in-depth impregnation studies.展开更多
To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development o...To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development of processing and manufacturing technologies to promote production of value-added wood products from eucalypts plantations. This project will also facilitate the formulation of forest management strategy in China to supplement the diminishing supply of timber from the natural forests. The sp...展开更多
In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW wer...In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW were pyrolyzed/gasified to propose an expert system for raw MSW. In this paper, wood, which was a prevalent component in MSW, was pyrolyzed and gasified in fluidized-bed reactors at different apparent excess air ratios （EARs）, temperatures and fluidizing velocities. For pyrolysis, with tem- perature increasing from 400℃ to 700℃, the yield of pyrolysis char decreased while that of pyrolysis gas increased （in this paper respectively from 28% to 20% and from 10% to 35%）, and when temperature was 500℃, the yield of pyrolysis tar reached the highest, up to 38% in this paper. It was the optimum for gasification when temperature was 600℃ and apparent EAR was 0.4. Under the experimental conditions of this paper, gasification efficiency achieved 73%, lower heat value（LHV） reached 5800 kJ/（Nm^3） and yield of syngas was 2.01 Nm^3/kg. Lower fluidizing velocity was useful to upgrade gasification efficiency and LHV of syngas for wood gasification. Based on the results, the reactive courses and mechanism were analyzed respectively for wood pyrolysis and gasification.展开更多
基金supported by the Science and Technology Support Project for the Twelfth Five-year Grant in China(Grant No.2015BAD14B05)
文摘As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.
基金supported according to contract No.5.1.1.2.i.0/1/22/A/CFLA/007 between“Forest Sector Competence Centre of Latvia”Ltd.the Central Finance and Contracting Agency which dated 20th January of 2023.
文摘Instead of the traditional linear model of taking,making,and disposing,the circular bio-economy promotes a regenerative approach.Although there is potential to create valuable products like betulin,lupeol,and suberinic acids(SA)from outer birch bark,many industries,such as plywood and pulp,often choose to incinerate substan-tial amounts of leftover birch bark to meet their energy needs.This highlights the importance of obtaining valu-able products from wood.The objective of this study was to examine various fractions of SA and assess their potential for wood impregnation.The fractions included SA potassium salts in ethanol(SAK-EtOH)and water(SAK-H2O),SA suspension in water(SAS-H2O)and dried SA,which was subsequently diluted in ethanol(DSA-EtOH).There is significant potential for utilizing SA in wood treatment formulations as a sustainable alternative to harmful petroleum-derived chemicals.This approach not only addresses environmental concerns but also enhances the functionality of wood in construction applications,such as improving impregnation for moisture and fungal protection.Among the solutions tested,the ethanol solution of SA,specifically DSA-EtOH,showed the highest weight percent gain(WPG)and the greatest leaching resistance.GPC analysis showed that SA salts in ethanol(SAK-EtOH)and water(SAK-H2O)predominantly consist of low molecular fractions and each process(acidification and drying)reduces the low molecular content in the sample.This suggests that SA polymerizes after drying,making it necessary to dissolve it in ethanol to meet the requirements for impregnation.Further opti-mization,including adjustments in the concentration of the SA ethanol solution and the curing temperature,is essential to identify the optimal conditions for more in-depth impregnation studies.
文摘To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development of processing and manufacturing technologies to promote production of value-added wood products from eucalypts plantations. This project will also facilitate the formulation of forest management strategy in China to supplement the diminishing supply of timber from the natural forests. The sp...
文摘In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW were pyrolyzed/gasified to propose an expert system for raw MSW. In this paper, wood, which was a prevalent component in MSW, was pyrolyzed and gasified in fluidized-bed reactors at different apparent excess air ratios （EARs）, temperatures and fluidizing velocities. For pyrolysis, with tem- perature increasing from 400℃ to 700℃, the yield of pyrolysis char decreased while that of pyrolysis gas increased （in this paper respectively from 28% to 20% and from 10% to 35%）, and when temperature was 500℃, the yield of pyrolysis tar reached the highest, up to 38% in this paper. It was the optimum for gasification when temperature was 600℃ and apparent EAR was 0.4. Under the experimental conditions of this paper, gasification efficiency achieved 73%, lower heat value（LHV） reached 5800 kJ/（Nm^3） and yield of syngas was 2.01 Nm^3/kg. Lower fluidizing velocity was useful to upgrade gasification efficiency and LHV of syngas for wood gasification. Based on the results, the reactive courses and mechanism were analyzed respectively for wood pyrolysis and gasification.
