Electronegativity-Induced Single-Ion Conducting Polymer Electrolyte for Solid-State Lithium Batteries

The application of solid polymer electrolytes(SPEs)is severely impeded by the insufficient ionic conductivity and low Li^(+)transference numbers(t_(Li)^(+)).Here,we report an iodine-driven strategy to address both the two longstanding issues of SPEs simultaneously.Electronegative lodine-containing groups introduced on polymer chains effectively attract Li^(+)ions,facilitate Li^(+)transport,and promote the dissociation of Li salts.Meanwhile,iodine is also favorable to alleviate the strong O-Li^(+)coordination through a Lewis acidbase interaction,further improving the ionic conductivity and t_(Li)^(+).As a proof of concept,an iodinated single-ion conducting polymer electrolyte(IPE)demonstrates a high ionic conductivity of 0.93 mS cm^(-1)and a high t_(Li)^(+)of 0.86 at 25℃,which is among the best results ever reported for SPEs.Moreover,symmetric Li/Li cells with IPE achieve a long-term stability over 2600 h through the in-situ formed LiF-rich interphase.As a result,Li-S battery with IPE maintains a high capacity of 623.7 mAh g^(-1)over 300 cycles with an average Coulombic efficiency of 99%.When matched with intercalation cathode chemistries,Li/IPE/LiFePO_(4)and Li/IPE/LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)solid-state batteries also deliver high-capacity retentions of 95%and 97%at 0.2 C after 120 cycles,respectively.

Revealing the specific role of sulfide and nano-alumina in composite solid-state electrolytes for performance-reinforced ether-nitrile copolymers

Composite solid-state electrolytes represent a critical pathway that balances the interface compatibility and lithium-ion conductivity in all-solid-state batteries.The quest for stable and highly ion-conductive combinations between polymers and fillers is vital,but blind attempts are often made due to a lack of understanding of the mechanisms involved in the interaction between polymers and fillers.Herein,we employ in-situ polymerization to prepare a polymer based on an ether-nitrile copolymer with high cathode stability as the foundation and discuss the performance enhancement mechanisms of argyrodite and nano-alumina.With 1%content of sulfide interacting with the polymer at the two-phase interface,the local enhancement of lithium-ion migration capability can be achieved,avoiding the reduction in capacity due to the low ion conductivity of the passivation layer during cycling.The capacity retention after 50cycles at 0.5 C increases from 83.5%to 94.4%.Nano-alumina,through anchoring the anions and interface inhibition functions,eventually poses an initial discharge capacity of 136.8 m A h g^(-1)at 0.5 C and extends the cycling time to 1000 h without short-circuiting in lithium metal batteries.Through the combined action of dual fillers on the composite solid-state electrolyte,promising insights are provided for future material design.

A dynamic database of solid-state electrolyte(DDSE)picturing all-solid-state batteries

All-solid-state batteries(ASSBs)are a class of safer and higher-energy-density materials compared to conventional devices,from which solid-state electrolytes(SSEs)are their essential components.To date,investigations to search for high ion-conducting solid-state electrolytes have attracted broad concern.However,obtaining SSEs with high ionic conductivity is challenging due to the complex structural information and the less-explored structure-performance relationship.To provide a solution to these challenges,developing a database containing typical SSEs from available experimental reports would be a new avenue to understand the structureperformance relationships and find out new design guidelines for reasonable SSEs.Herein,a dynamic experimental database containing>600 materials was developed in a wide range of temperatures(132.40–1261.60 K),including mono-and divalent cations(e.g.,Li^(+),Na^(+),K^(+),Ag^(+),Ca^(2+),Mg^(2+),and Zn^(2+))and various types of anions(e.g.,halide,hydride,sulfide,and oxide).Data-mining was conducted to explore the relationships among different variates(e.g.,transport ion,composition,activation energy,and conductivity).Overall,we expect that this database can provide essential guidelines for the design and development of high-performance SSEs in ASSB applications.This database is dynamically updated,which can be accessed via our open-source online system.

A Room-Temperature Chloride-Conducting Metal-Organic Crystal[Al(DMSO)_(6)]Cl_(3) for Potential Solid-State Chloride-Shuttle Batteries

The growing demand for substitutes of lithium chemistries in battery leads to a surge in budding novel anion-based electrochemical energy storage,where the chloride ion batteries(CIBs)take over the role.The application of CIBs is limited by the dissolution and side reaction of chloride-based electrode materials in a liquid electrolyte.On the flipside,its solid-state electrolytes are scarcely reported due to the challenge in realizing fast Cl^(-)conductivity.The present study reports[Al(DMSO)_(6)]Cl_(3),a solid-state metal-organic material,allows chloride ion transfer.The strong Al-Cl bonds in AlCl_(3)are broken down after coordinating of Al^(3+)by ligand DMSO,and Cl^(-)in the resulting compound is weakly bound to complexions[Al(DMSO)_(6)]^(3+),which may facilitate Cl^(-)migration.By partial replacement of Cl^(-)with PF_(6)^(-),the room-temperature ionic conductivity of as-prepared electrolyte is increased by one order of magnitude from 2.172×10^(-5)S cm^(-1)to 2.012×10^(-4)S cm^(-1).When they are assembled with Ag(anode)/Ag-AgCl(cathode)electrode system,reversible electrochemical redox reactions occur on both sides,demonstrating its potential for solid-state chloride ion batteries.The strategy by weakening the bonding interaction using organic ligands between Cl^(-)and central metallic ions may provide new ideas for developing solid chloride-ion conductors.

Polymer dispersed ionic liquid electrolytes with high ionic conductivity for ultrastable solid-state lithium batteries

Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for building solid-state lithium batteries due to their excellent flexibility,scalability,and interfacial compatibility with electrodes.However,the low ionic conductivity and poor cyclic stability of SPEs do not meet the requirements for practical applications of lithium batteries.Here,a novel polymer dispersed ionic liquid-based solid polymer electrolyte(PDIL-SPE)is fabricated using the in situ polymerization-induced phase separation(PIPS)method.The as-prepared PDIL-SPE possesses both outstanding ionic conductivity(0.74 mS cm^(-1) at 25℃)and a wide electrochemical window(up to 4.86 V),and the formed unique three-dimensional(3D)co-continuous structure of polymer matrix and ionic liquid in PDIL-SPE can promote the transport of lithium ions.Also,the 3D co-continuous structure of PDIL-SPE effectively accommodates the severe volume expansion for prolonged lithium plating and stripping processes over 1000 h at 0.5 mA cm^(-2) under 25℃.Moreover,the LiFePO_(4)//Li coin cell can work stably over 150 cycles at a 1 C rate under room temperature with a capacity retention of 90.6%from 111.1 to 100.7 mAh g^(-1).The PDIL-SPE composite is a promising material system for enabling the ultrastable operation of solid-state lithium-metal batteries.

3D spiny AlF_(3)/Mullite heterostructure nanofiber as solid-state polymer electrolyte fillers with enhanced ionic conductivity and improved interfacial compatibility

Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are widely used in lithium metal solid-state batteries due to their unique properties.However,there are still some defects such as low ionic conductivity at room temperature and weak inhibition of lithium dendrite growth.Herein,the spiny inorganic nanofibers heterostructure with mullite whiskers grown on the surface of aluminum fluoride(AlF_(3))nanofibers are introduced into the PEOLi TFSI electrolytes for the first time to prepare composite solid-state electrolytes.The AlF_(3)as a strong Lewis acid can adsorb anions and promote the dissociation of Li salts.Besides,the specially threedimensional(3D)structure enlarges the effective contacting interface with the PEO polymer,which allows the lithium ions to be transported not only along the large aspect ratio of AlF3nanofibers,but also along the mullite phase in the transmembrane direction rapidly.Thereby,the transport channel of lithium ions at the spiny inorganic nanofibers-polymer interface is further improved.Benefiting from these advantages,the obtained composite solid-state electrolyte has a high ionic conductivity of 1.58×10^(-4)S cm^(-1)at 30℃and the lithium ions transfer number of 0.53.In addition,the AlF3has strong binding energy with anions,low electronic conductivity and wide electrochemical stability window,and reduced nucleation overpotential of lithium during cycling,which is positive for lithium dendrite suppression in solid-state electrolytes.Thus,the assembled symmetric Li/Li symmetric batteries exhibit stable cycling performance at different area capacities of 0.15,0.2,0.3 and 0.4 m A h cm^(-2).More importantly,the LiFePO_(4)(LFP)/Li battery still has 113.5 m A h g-1remaining after 400 cycles at 50℃and the Coulomb efficiency is nearly 100%during the long cycle.Overall,the interconnected structure of 3D spiny inorganic heterostructure nanofiber constitutes fast and uninterrupted lithium ions transport channels,maximizing the synergistic effect of interfacial transport of inorganic fillers and reducing PEO crystallinity,thus providing a novel approach to high performance solid-state electrolytes.

Recent Advances on Polyoxometalate-Based Ion-Conducting Electrolytes for Energy-Related Devices

Solid-state electrolytes have attracted considerable attention in new energyrelated devices due to their high safety and broad application platform.Polyoxometalates(POMs)are a kind of molecular-level cluster compounds with unique structures.In recent years,owing to their abundant physicochemical properties(including high ionic conductivity and reversible redox activity),POMs have shown great potential in becoming a new generation of solid-state electrolytes.In this review,an overview is investigated about how POMs have evolved as ion-conducting materials from basic research to novel solid-state electrolytes in energy devices.First,some expressive POM-based ion-conducting materials in recent years are introduced and classified,mainly inspecting their structural and functional relationship.After that,it is further focused on the application of these ionconducting electrolytes in the fields of proton exchange membranes,supercapacitors,and ion batteries.In addition,some properties of POMs(such as inherent dimension,capable of forming stable hydrogen bonds,and reversible bonding to water molecules)enable these functional POM-based electrolytes to be employed in innovative applications such as ion selection,humidity sensing,and smart materials.Finally,some fundamental recommendations are given on the current opportunities and challenges of POM-based ion-conducting electrolytes.

COF-based single Li^(+)solid electrolyte accelerates the ion diffusionandrestrains dendritegrowthin quasi-solid-state organic batteries

A solid-state electrolyte(SSE),which is a solid ionic conductor and electroninsulating material,is known to play a crucial role in adapting a lithium metal anode to a high-capacity cathode in a solid-state battery.Among the various SSEs,the single Li-ion conductor has advantages in terms of enhancing the ion conductivity,eliminating interfacial side reactions,and broadening the electrochemical window.Covalent organic frameworks(COFs)are optimal platforms for achieving single Li-ion conduction behavior because of wellordered one-dimensional channels and precise chemical modification features.Herein,we study in depth three types of Li-carboxylate COFs(denoted LiOOC-COFn,n=1,2,and 3)as single Li-ion conducting SSEs.Benefiting from well-ordered directional ion channels,the single Li-ion conductor LiOOC-COF3 shows an exceptional ion conductivity of 1.36×10^(-5) S cm^(-1) at room temperature and a high transference number of 0.91.Moreover,it shows excellent electrochemical performance with long-term cycling,high-capacity output,and no dendrites in the quasi-solid-state organic battery,with the organic small molecule cyclohexanehexone(C_(6)O_(6))as the cathode and the Li metal as the anode,and enables effectively avoiding dissolution of the organic electrode by the liquid electrolyte.

Optimized CeO_(2) Nanowires with Rich Surface Oxygen Vacancies Enable Fast Li-Ion Conduction in Composite Polymer Electrolytes

Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.

Empirical decay relationship between ionic conductivity and porosity of garnet type inorganic solid-state electrolytes

Ionic conductivity is one of the crucial parameters for inorganic solid-state electrolytes.To explore the relationship between porosity and ionic conductivity,a series of Li_(6.4)Ga_(0.2)La_(3)Zr_(2)O_(12) garnet type solid-state electrolytes with different porosities were prepared via solid-state reaction.Based on the quantified data,an empirical decay relationship was summarized and discussed by means of mathematical model and dimensional analysis method.It suggests that open porosity causes ionic conductivity to decrease exponentially.The pre-exponential factor obeys the Arrhenius Law quite well with the activation energy of 0.23 eV,and the decay constant is averaged to be 2.62%.While the closed porosity causes ionic conductivity to decrease linearly.The slope and intercept of this linear pattern also obey the Arrhenius Law and the activation energies are 0.24 and 0.27 eV,respectively.Moreover,the total porosity is linearly dependent on the open porosity,and different sintering conditions will lead to different linear patterns with different slopes and intercepts.

Comprehensively-modified polymer electrolyte membranes with multifunctional PMIA for highly-stable all-solid-state lithium-ion batteries

Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion conductance and poor mechanical and thermal properties.Herein,poly(m-phenylene isophthalamide)(PMIA)is employed as a multifunctional additive to improve the overall properties of the PEO-based electrolytes.The hydrogen-bond interactions between PMIA and PEO/TFSI-can effectively prevent the PEO crystallization and meanwhile facilitate the LiTFSI dissociation,and thus greatly improve the ionic conductivity(two times that of the pristine electrolyte at room temperature).With the incorporation of the high-strength PMIA with tough amide-benzene backbones,the PMIA/PEO-LiTFSI composite polymer electrolyte(CPE)membranes also show much higher mechanical strength(2.96 MPa),thermostability(4190℃)and interfacial stability against Li dendrites(468 h at 0.10 mA cm-2)than the pristine electrolyte(0.32 MPa,364℃and short circuit after 246 h).Furthermore,the CPE-based LiFePO4/Li cells exhibit superior cycling stability(137 mAh g^-1 with 93%retention after 100 cycles at 0.5 C)and rate performance(123 mAh g^-1 at 1.0 C).This work provides a novel and effective CPE structure design strategy to achieve comprehensively-upgraded electrolytes for promising solid-state battery applications.

Flexible ion-conducting membranes with 3D continuous nanohybrid networks for high-performance solid-state metallic lithium batteries

Polyethylene oxide(PEO)-based electrolytes are considered as one of the most promising solid-state electrolytes for next-generation lithium batteries with high safety and energy density;however,the drawbacks such as insufficient ion conductance,mechanical strength and electrochemical stability hinder their applications in metallic lithium batteries.To enhance their overall properties,flexible and thin composite polymer electrolyte(CPE)membranes with 3D continuous aramid nanofiber(ANF)–Li_(1.4)Al_(0.4)Ti_(1.6)(PO_(4))_(3)(LATP)nanoparticle hybrid frameworks are facilely prepared by filling PEO–Li TFSI in the 3D nanohybrid scaffolds via a solution infusion way.The construction of the 3D continuous nanohybrid networks can effectively inhibit the PEO crystallization,facilitate the lithium salt dissociation and meanwhile increase the fast-ion transport in the continuous LATP electrolyte phase,and thus greatly improving the ionic conductivity(~3 times that of the pristine one).With the integration of the 3D continuity and flexibility of the 3D ANF networks and the thermostability of the LATP phase,the CPE membranes also show a wider electrochemical window(~5.0 V vs.4.3 V),higher tensile strength(~4–10times that of the pristine one)and thermostability,and better lithium dendrite resistance capability.Furthermore,the CPE-based Li FePO_(4)/Li cells exhibit superior cycling stability(133 m Ah/g after 100 cycles at 0.3 C)and rate performance(100 m Ah/g at 1 C)than the pristine electrolyte-based cell(79 and 29m Ah/g,respectively).This work offers an important CPE design criteria to achieve comprehensivelyupgraded solid-state electrolytes for safe and high-energy metal battery applications.

Effects of Heat Treatment and Additive LiF on the Properties of Solid-State Electrolyte of Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3)

A solid electrolyte of LAGP[Li_(1.5)Al_(0.5)Ge_(1.5)(PO_(4))_(3)]contained 0.5 wt%Li F was prepared by using low-volatile raw materials.The effects of different heat treatment conditions(750–900°C,4–10 h)and additive(Li F)on the ionic conductivity,structural morphology,and crystal transformation process were investigated in detail.EIS(electrochemical impedance spectroscopies)showed that the ionic conductivity of LAGP contained 0.5 wt%Li F had a highest value of 3.17×10^(-4)S cm^(-1)with low activation energy(0.31 e V)after treating 825°C for 6 h,more than LAGP of 2.45×10^(-4)S cm^(-1).DSC analysis and SEM images indicated that adding a small amount of Li F to LAGP not only can lower the glass transition temperature(from 513°C to507°C)and crystallization temperature(from 622°C to 605°C),but also can modify the grain boundary and increase the relative density of LAGP(from 95.8%to 97.7%).

Effects of fluorination on crystal structure and electrochemical performance of antiperovskite solid electrolytes

The development of all-solid-state lithium batteries(ASSLBs)depends on exploiting solid-state electrolytes(SSEs)with high ionic conductivity and electrochemical stability.Fluorination is generally considered to be an effective strategy to improve the ionic conductivity and electrochemical stability of inorganic SSEs.Here,we report the partial fluorination of the chlo rine sites in an antiperovskite,by which the orthorhombic Li_(2)OHCl was transformed into cubic Li_(2)OHCl_(0.9)F_(0.1),resulting in a fourfold increase in ionic conductivity at 30℃.The ab initio molecular dynamics simulations suggest that both the crystal symmetry and the anions electronegativity influence the diffusion of Li+in the antiperovskite structure.Besides,from the perspective of experiments and calculations,it is confirmed that fluorination is a feasible method to improve the electrochemical stability of antiperovskite SSEs.The LiFePO_(4)|Li cell based on Li_(2)OHCl_(0.9)F_(0.1) is also assembled and exhibits stable cycle performance,which indicates that fluorination of antiperovskite SSEs is an effective way to produce high-performance SSEs for practical application of ASSLBs.

Incorporation of Ionic Conductive Polymers into Sulfide Electrolyte-Based Solid-State Batteries to Enhance Electrochemical Stability and Cycle Life

Sulfide-based inorganic solid electrolytes are promising materials for high-performance safe solid-state batteries.The high ion conductivity,mechanical characteristics,and good processability of sulfide-based inorganic solid electrolytes are desirable properties for realizing high-performance safe solid-state batteries by replacing conventional liquid electrolytes.However,the low chemical and electrochemical stability of sulfide-based inorganic solid electrolytes hinder the commercialization of sulfide-based safe solid-state batteries.Particularly,the instability of sulfide-based inorganic solid electrolytes is intensified in the cathode,comprising various materials.In this study,carbonate-based ionic conductive polymers are introduced to the cathode to protect cathode materials and suppress the reactivity of sulfide electrolytes.Several instruments,including electrochemical spectroscopy,X-ray photoelectron spectroscopy,and scanning electron microscopy,confirm the chemical and electrochemical stability of the polymer electrolytes in contact with sulfide-based inorganic solid electrolytes.Sulfide-based solid-state cells show stable electrochemical performance over 100 cycles when the ionic conductive polymers were applied to the cathode.

Polyimide covalent organic frameworks as efficient solid-state Li^(+) electrolytes

Covalent organic frameworks(COFs) are attractive porous crystalline materials with extremely high stability, easy functionalization, and open channels, which are expected to be unique ion conductors/transporters in lithium ion batteries(LIBs). Despite recent advances, low ion conductivity and low transference number, resulting in low charging/discharging rate, low energy density, and short battery life, are the main issues that limit their direct application as solid electrolytes in LIBs. Here, we designed and synthesized a novel polyimide COF, namely, TAPA-PDI-COF, with abundant C=O groups, which has been successfully employed as high-performance solid electrolytes by doping TAPA-PDI-COF and succinonitrile(SN). Both the well-defined nanochannels of COFs and SN confined in the well-aligned channels restricted the free migration of anions, while C=O on COFs and CN groups of SN enhanced Li^(+) transport, thus achieving a high ion conductivity of 0.102 m S cm^(-1)at 80 °C and a high lithium-ion transference number of 0.855 at room temperature. According to density functional theory(DFT)calculations, Li-ion migration mainly adopted in-plane transport rather than the axial pathway, which may be due to the shorter hopping distances in the planar pathway. The results suggest an effective strategy for the design and development of all-solidstate ionic conductors for achieving high-performance LIBs.

Boron nitride nanofibers enhanced composite PEO-based solid-state polymer electrolytes for lithium metal batteries

Polyethylene oxide(PEO)-based solid-state polymer electrolytes(SPEs)are limited by their poor cyclic stability and inferior ionic conductivity for applicating in high-safety,long-cycling and high-energy-density lithium metal batteries.Herein,porous boron nitride nanofibers(BNNFs)are filled into PEO-based SPE,which significantly suppresses Li dendrites growth and enhances the electrochemical performance of Li metal battery.BNNFs with high porosity have more active sites to connect with PEO,which can effectively reduce the crystallinity of the PEO matrix and enhance its ionic conductivity.Moreover,owing to the hardness and good stability of BNNFs,BNNFs/PEO/Li TFSI electrolyte exhibits a wider electrochemical window,better mechanical property and higher thermal stability compared with PEO/Li TFSI electrolyte.Consequently,the Li symmetric cell composed of 1%BNNFs/PEO/Li TFSI performs good cyclic stability(>1800 h),and the Li||1%BNNFs/PEO/Li TFSI||LFP full battery shows obviously improved performances in charge-discharge polarization voltage,discharge specific capacity,rate performance and cyclic stability than the Li||PEO/Li TFSI||LFP battery.

Data-Driven Viewpoint for Developing Next-Generation Mg-Ion Solid-State Electrolytes

Magnesium(Mg)is a promising alternative to lithium(Li)as an anode material in solid-state batteries due to its abundance and high theoretical volumetric capacity.However,the sluggish Mg-ion conduction in the lattice of solidstate electrolytes(SSEs)is one of the key challenges that hamper the development of Mg-ion solid-state batteries.Though various Mg-ion SSEs have been reported in recent years,key insights are hard to be derived from a single literature report.Besides,the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs.In this viewpoint article,we analyze the structural characteristics of the Mg-based SSEs with high ionic conductivity reported in the last four decades based upon data mining-we provide big-data-derived insights into the challenges and opportunities in developing next-generation Mg-ion SSEs.

Li-ion transport in solid-state electrolyte of Li_(1-x)Al_(1-x)Si_(2+x)O_(6):an ab initio study

All-solid-state batteries are considered as nextgeneration technology for energy storage due to their high energy density and excellent s afety.However,only a few solid electrolytes exhibit ionic conductivities comparable to liquid electrolytes.Finding low-cost solid electrolytes with high Liion conductivity is in high demand.Based on the ab initio molecular dynamic simulations,the Li^(+)diffusion inβ-LiAISi_(2)O_(6),a type of cost-effective and naturally-available mineral,and its disordered systems Li_(1-x)Al_(1-x)Si_(2+x)O_(6)with-1.0≤x≤0.5 was studied.Our calculations show that the phases of Li_(1-x)Al_(1-x)Si_(2+x)O_(6)with nonzero x all possess much lower diffusion energy barriers than pristine LiAlSi_(2)O_(6).When x is positive,increased concentration of lithium vacancies accelerates the diffusion of Li-ions.When x is negative,additional Li-ions are inserted into structures and co-migration is stimulated among these Li-ions.In particular,the maximal ionic conductivity at 300 K(1.92×10^(-6)S·cm^(-1))is obtained in Li_(2)Al_(2)SiO_(6)(x=-1.0),which is five orders of magnitude larger than that of pristineβ-LiAlSi_(2)O_(6).In addition,the diffusion barrier can be further reduced to 0.38 eV by replacing Si with Ge,and the ionic conductivity for Li_(2)Al_(2)GeO_(6)can reach 3.08×10~(-5)S·cm^(-1)at 300 K.Our work facilitates the understanding of Li+conduction mechanisms in silicatebased electrolytes and the development of cost-effective and high-performance solid-s ate electrolytes.

Atomistic mechanism of high ionic conductivity in lithium ytterbium-based halide solid electrolytes:A first-principles study

As the next generation of commercial automotive power batteries begins replacing liquid lithium batteries,many look towards all-solid-state batteries to pioneer the future.All-so lid-state batteries have attracted the attention of countless researchers around the world because of their high safety and high energy density.In recent times,halide solid-state electrolytes have become a research hotspot within solid-state electrolytes because of their potentially superior properties.In this paper,in the framework of DFT,we investigated the atomic mechanisms of improving the ionic conductivity and stability of Li_(3)YbCl_(6).Our calculations show that both trigonal and orthorhombic Li_(3)YbCl_(6) exhibit wide electrochemical windows and metastable properties(100 meV/atom>Ehull>0 meV/atom).However,the orthorhombic Li_(3)YbCl_(6) can be stabilized at high temperatures by taking the vibrational entropy into account,which is supported by the experimental results.Moreover,it is expected that because of the Yb/Li synergistic interactions that,due to their strong mutual coulomb repulsion,influence the Li^(+)transport behavior,the orthorhombic Li_(3)YbCl_(6) might have superior ionic conductivities with appropriate Li+migration paths determined by the Yb^(3+) distribution.Also,higher ionic conductivities can be obtained by regulating the random distribution of Li^(+) ions.Further Li^(+)-deficiency can also largely increase the ionic conductivity by invoking vacancies.This study helps gain a deeper understanding of the laws that govern ionic conductivities and stabilities and provides a certain theoretical reference for the experimental development and design of halide solid-state electrolytes.