Electrogenerated chemiluminescence(electrochemiluminescence, ECL) generates species at electrode surfaces, which undergoes electron-transfer reactions and forms excited states to emit light. It has become a very power...Electrogenerated chemiluminescence(electrochemiluminescence, ECL) generates species at electrode surfaces, which undergoes electron-transfer reactions and forms excited states to emit light. It has become a very powerful analytical technique and has been widely used in such as clinical testing, biowarfare agent detection, and pharmaceutical analysis. This review focuses on the current trends of molecular recognition-based biosensing methods for pharmaceutical analysis since 2010. It introduces a background of ECL and presents the recent ECL developments in ECL immunoassay(ECLIA), immunosensors, enzyme-based biosensors, aptamer-based biosensors, and molecularly imprinted polymers(MIP)-based sensors. At last, the future perspective for these analytical methods is briefly discussed.展开更多
A novel electrogenerated chemiluminescence(ECL)sensor for the determination of metoclopramide was developed by employing ruthenium complex as an ECL signal producer and an ordered mesoporous carbon(OMC)material as mod...A novel electrogenerated chemiluminescence(ECL)sensor for the determination of metoclopramide was developed by employing ruthenium complex as an ECL signal producer and an ordered mesoporous carbon(OMC)material as modified material.The ECL sensor was fabricated by adsorption ruthenium complex into a mixture of OMC and Nafion,which showed good electrochemical and ECL behaviors.It was found that the ECL intensity of the sensor fabricated was greatly enhanced in the presence of metoclopramide.Based on this finding,a highly sensitive and reproducible ECL method was developed for the determination of metoclopramide.The result showed that the ECL intensity was linear with the concentration of metoclopramide in the range from 1.0×10-10 to 5.0×10-7M and the detection limit was 3×10-11M.The ECL sensor exhibited a long-term stability and a fine reproducibility with relative standard deviation of 1.0 % for 1.0×10-10M metoclopramide in 18 continuous determinations.The developed method has been applied to the determination of metoclopramide in tablet samples with satisfactory results.展开更多
A simple and sensitive flow injection method is presented for the determination of histidine based on its enhancement of electrogenerated chemiluminescence (ECL) of luminol. After optimization of the experimental para...A simple and sensitive flow injection method is presented for the determination of histidine based on its enhancement of electrogenerated chemiluminescence (ECL) of luminol. After optimization of the experimental parameters, the working range for histidine was in 1.0 x 10-6 to 1.0 x 10 -3 mol/L with a detection limit (S/N = 3) of 0.56 mmol/L. The relative standard deviation was 1.6% for 11 measurements of 5 x 10 5 mol/L histidine solution. The proposed method has been successfully applied to the determination of histidine in real pharmaceutical preparation.展开更多
A novel chemiluminescence (CL) sensor for NH4+ combined with flow injection analysis is presented in this paper. It is based on the inhibition effect of NH4+ on the CL reaction between luminol, immobilized electrostat...A novel chemiluminescence (CL) sensor for NH4+ combined with flow injection analysis is presented in this paper. It is based on the inhibition effect of NH4+ on the CL reaction between luminol, immobilized electrostatically on an anion-exchange column, and hypochlorous acid electrogenerated on-line. The sensor responds linearly to NH4+ concentration in 1.0x10(-6)-4.0x10(-9) g/ml range. A complete analysis could be performed in 1 min. The system is stable for 200 determination.展开更多
In this paper, studies on chemiluminescence (CL) systems with electrogenerated reagents, including BrO -, ClO -, Br_2, [Cu^(HIO_6)_2] 5- , H_2O_2, Mn 3+ , Co 3+ and Ag 2+ , are described. The analytical ...In this paper, studies on chemiluminescence (CL) systems with electrogenerated reagents, including BrO -, ClO -, Br_2, [Cu^(HIO_6)_2] 5- , H_2O_2, Mn 3+ , Co 3+ and Ag 2+ , are described. The analytical applications of the CL system with electrogenerated reagents are reviewed.展开更多
A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC...A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC） reaction as well as the subsequent chemiluminescence （CL） reaction not only could be separated spatially, but also presented high efficiency for analytical purpose. In this case, the core-shell luminol-based SiO2 nanoparticles offered more potential to avoid the contradiction between the EC and the CL reaction conditions. A new ECL method based on the nanoparticle was developed, and isoniazid was selected as a model analyte to illustrate the characteristics of this new ECL method. Under the selected conditions, the proposed ECL response to isoniazid concentration was linear in the range of 1.0 ×10^-10 to 1.0 × 10^-6 g/mL with 2 × 10^-11g/mL detection limit.展开更多
Electrogenerated chemiluminescence(ECL)has been extensively used in ultrasensitive electroanalysis because it can be generated electrochemically without using expensive optics and light sources.Visible ECL emission ca...Electrogenerated chemiluminescence(ECL)has been extensively used in ultrasensitive electroanalysis because it can be generated electrochemically without using expensive optics and light sources.Visible ECL emission can be obtained with a reasonable quantum yield and stability.Blue ECL is rare and often suffers from stability and poor quantum efficiency.Blue ECL emission at 473 nm from organometallic halide perovskite nanocrystals(PNCs),CH_(3)NH_(3)PbCl_(1.08)Br_(1.92),is reported here for the first time using tripropylamine(TPrA)as co-reactant.The blue ECL emission peak resembles its photoluminescence peak position.In addition to this blue emission peak,the ECL spectra of CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs also showed a broad ECL peak at 745 nm.Generation of the second ECL peak at 745 nm from CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs was can be explained by the existence of surface trap states on as-synthesized PNC due to incomplete surface passivation.Halide anion tunability of ECL emission from CH3NH3PbX3(X:Cl,Br,I)PNCs is also demonstrated.The fluorescence microscopy image of single PNC and stability of selected single PNCs are presented in this with simultaneous acquisition of fluorescence spectra using 405-nm laser excitation.The photoluminescence(PL)decay was described by PL lifetime(τ)of 1.2 ns.The effect of the addition of surfactants(oleic acid and n-octylamine)on the fluorescence intensity and stability of CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs is also discussed.展开更多
A novel electrogenerated chemiluminescence （ECL） aptasensor for highly sensitive detection of thrombin was developed on the basis of poly（pyrrole-co-pyrrole propylic acid） nanoparticles loaded with aptamer and rut...A novel electrogenerated chemiluminescence （ECL） aptasensor for highly sensitive detection of thrombin was developed on the basis of poly（pyrrole-co-pyrrole propylic acid） nanoparticles loaded with aptamer and ruthenium complex. Thrombin binding aptamers served as the molecular recognition elements and ruthenium bis（2,2＇-bipyridine） （2,2＇-bipyridine-4,4＇-dicarboxylic acid）-ethylenediamine （Rul） was used as an ECL signal complex. Novel electroactive polymers poly（pyrrole-co-pyr- role propylic acid） nanoparticles （Ppy-pa NPs） were synthesized by a simple alcohol-assisted microemulsion polymerization. Rul-Ppy-pa NPs were synthesized by covalently coupling Rul with the Ppy-pa NPs. Ppy-pa NPs and Rul-Ppy-pa NPs were characterized using a fourier transform infrared spectrometer, super-conducting fourier digital NMR spectrometer, and trans- mission electron microscope. One ECL chemical sensor fabricated by immobilizing the Rul-Ppy-pa NPs on PIGE was developed for the determination of TprA with a high sensitivity and stability. The ECL aptasensor was fabricated by covalenfly coupling the thrombin binding aptamer-I （TBA-I） onto the surface of the paraffin-impregnated graphite electrode, which had been covalently modified with a monolayer of 4-aminobenzene sulfonic acid via electrochemical oxidations, for capturing thrombin onto the electrode and then the TBA-II labeled with Rul-Ppy-pa NPs was bound with epitope of thrombin. The ECL aptasensot showed an extremely low detection limit of 3.0×10^-16 mol/L for thrombin and a good selectivity. This work demonstrated that using Ppy-pa NPs as a carrier of ruthenium complex and molecular recognition element was a promising approach for the fabrication of ECL biosensor with high sensitivity.展开更多
In ion-annihilation electrochemiluminescence(ECL),luminophore ions are generated by oxidation as well as reduction at electrodes surfaces,and subsequently recombine into an electronically excited state,which emits lig...In ion-annihilation electrochemiluminescence(ECL),luminophore ions are generated by oxidation as well as reduction at electrodes surfaces,and subsequently recombine into an electronically excited state,which emits light.The intensity of the emitted light is often limited by the kinetic rate of recombination of the luminophore ion species.Recombination or annihilation rates are high ranging up to approximately 10^(10) M^(−1) s^(−1) and can be difficult to determine using scanning electrochemical microscopy or high-frequency oscillations of an electrode potential.Here,we propose determining annihilation kinetics by measuring the relative change of the emitted light intensity as a function of luminophore concentration.Using finite element simulations of annihilation ECL in a geometry of two closely spaced electrodes biased at constant potentials,we show that,with increasing concentrations,luminescence intensity crosses over from a quadratic dependence on concentration to a linear regime-depending on the rate of annihilation.Our numerical results are applicable to scanning electrochemical microscopy as well as nanofluidic electrochemical devices to determine fast ion-annihilation kinetics.展开更多
文摘Electrogenerated chemiluminescence(electrochemiluminescence, ECL) generates species at electrode surfaces, which undergoes electron-transfer reactions and forms excited states to emit light. It has become a very powerful analytical technique and has been widely used in such as clinical testing, biowarfare agent detection, and pharmaceutical analysis. This review focuses on the current trends of molecular recognition-based biosensing methods for pharmaceutical analysis since 2010. It introduces a background of ECL and presents the recent ECL developments in ECL immunoassay(ECLIA), immunosensors, enzyme-based biosensors, aptamer-based biosensors, and molecularly imprinted polymers(MIP)-based sensors. At last, the future perspective for these analytical methods is briefly discussed.
基金supported by the National Natural Science Foundation of China(No.20805028)
文摘A novel electrogenerated chemiluminescence(ECL)sensor for the determination of metoclopramide was developed by employing ruthenium complex as an ECL signal producer and an ordered mesoporous carbon(OMC)material as modified material.The ECL sensor was fabricated by adsorption ruthenium complex into a mixture of OMC and Nafion,which showed good electrochemical and ECL behaviors.It was found that the ECL intensity of the sensor fabricated was greatly enhanced in the presence of metoclopramide.Based on this finding,a highly sensitive and reproducible ECL method was developed for the determination of metoclopramide.The result showed that the ECL intensity was linear with the concentration of metoclopramide in the range from 1.0×10-10 to 5.0×10-7M and the detection limit was 3×10-11M.The ECL sensor exhibited a long-term stability and a fine reproducibility with relative standard deviation of 1.0 % for 1.0×10-10M metoclopramide in 18 continuous determinations.The developed method has been applied to the determination of metoclopramide in tablet samples with satisfactory results.
文摘A simple and sensitive flow injection method is presented for the determination of histidine based on its enhancement of electrogenerated chemiluminescence (ECL) of luminol. After optimization of the experimental parameters, the working range for histidine was in 1.0 x 10-6 to 1.0 x 10 -3 mol/L with a detection limit (S/N = 3) of 0.56 mmol/L. The relative standard deviation was 1.6% for 11 measurements of 5 x 10 5 mol/L histidine solution. The proposed method has been successfully applied to the determination of histidine in real pharmaceutical preparation.
文摘A novel chemiluminescence (CL) sensor for NH4+ combined with flow injection analysis is presented in this paper. It is based on the inhibition effect of NH4+ on the CL reaction between luminol, immobilized electrostatically on an anion-exchange column, and hypochlorous acid electrogenerated on-line. The sensor responds linearly to NH4+ concentration in 1.0x10(-6)-4.0x10(-9) g/ml range. A complete analysis could be performed in 1 min. The system is stable for 200 determination.
基金ProjectsupportedbytheNationalScienceFoundationofChina (No .2 0 175 0 3 9) ,YouthFoundationofHouYingdong (No .810 13 )andtheFoundationofStateKeyLaboratoryofChemo/BiosensingandChemometrics (No .2 0 0 2 17)
文摘In this paper, studies on chemiluminescence (CL) systems with electrogenerated reagents, including BrO -, ClO -, Br_2, [Cu^(HIO_6)_2] 5- , H_2O_2, Mn 3+ , Co 3+ and Ag 2+ , are described. The analytical applications of the CL system with electrogenerated reagents are reviewed.
基金Project supported by the National Natural Science Foundation of China （No. 2057040）.
文摘A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC） reaction as well as the subsequent chemiluminescence （CL） reaction not only could be separated spatially, but also presented high efficiency for analytical purpose. In this case, the core-shell luminol-based SiO2 nanoparticles offered more potential to avoid the contradiction between the EC and the CL reaction conditions. A new ECL method based on the nanoparticle was developed, and isoniazid was selected as a model analyte to illustrate the characteristics of this new ECL method. Under the selected conditions, the proposed ECL response to isoniazid concentration was linear in the range of 1.0 ×10^-10 to 1.0 × 10^-6 g/mL with 2 × 10^-11g/mL detection limit.
基金We would like to thank the financial support from the National Science Foundation(NSF award CHE 1508192 and OIA-1539035).
文摘Electrogenerated chemiluminescence(ECL)has been extensively used in ultrasensitive electroanalysis because it can be generated electrochemically without using expensive optics and light sources.Visible ECL emission can be obtained with a reasonable quantum yield and stability.Blue ECL is rare and often suffers from stability and poor quantum efficiency.Blue ECL emission at 473 nm from organometallic halide perovskite nanocrystals(PNCs),CH_(3)NH_(3)PbCl_(1.08)Br_(1.92),is reported here for the first time using tripropylamine(TPrA)as co-reactant.The blue ECL emission peak resembles its photoluminescence peak position.In addition to this blue emission peak,the ECL spectra of CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs also showed a broad ECL peak at 745 nm.Generation of the second ECL peak at 745 nm from CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs was can be explained by the existence of surface trap states on as-synthesized PNC due to incomplete surface passivation.Halide anion tunability of ECL emission from CH3NH3PbX3(X:Cl,Br,I)PNCs is also demonstrated.The fluorescence microscopy image of single PNC and stability of selected single PNCs are presented in this with simultaneous acquisition of fluorescence spectra using 405-nm laser excitation.The photoluminescence(PL)decay was described by PL lifetime(τ)of 1.2 ns.The effect of the addition of surfactants(oleic acid and n-octylamine)on the fluorescence intensity and stability of CH_(3)NH_(3)PbCl_(1.08)Br_(1.92) PNCs is also discussed.
基金supported by the National Natural Science Foundation of China (21027007, 20975065 & 20775046)
文摘A novel electrogenerated chemiluminescence （ECL） aptasensor for highly sensitive detection of thrombin was developed on the basis of poly（pyrrole-co-pyrrole propylic acid） nanoparticles loaded with aptamer and ruthenium complex. Thrombin binding aptamers served as the molecular recognition elements and ruthenium bis（2,2＇-bipyridine） （2,2＇-bipyridine-4,4＇-dicarboxylic acid）-ethylenediamine （Rul） was used as an ECL signal complex. Novel electroactive polymers poly（pyrrole-co-pyr- role propylic acid） nanoparticles （Ppy-pa NPs） were synthesized by a simple alcohol-assisted microemulsion polymerization. Rul-Ppy-pa NPs were synthesized by covalently coupling Rul with the Ppy-pa NPs. Ppy-pa NPs and Rul-Ppy-pa NPs were characterized using a fourier transform infrared spectrometer, super-conducting fourier digital NMR spectrometer, and trans- mission electron microscope. One ECL chemical sensor fabricated by immobilizing the Rul-Ppy-pa NPs on PIGE was developed for the determination of TprA with a high sensitivity and stability. The ECL aptasensor was fabricated by covalenfly coupling the thrombin binding aptamer-I （TBA-I） onto the surface of the paraffin-impregnated graphite electrode, which had been covalently modified with a monolayer of 4-aminobenzene sulfonic acid via electrochemical oxidations, for capturing thrombin onto the electrode and then the TBA-II labeled with Rul-Ppy-pa NPs was bound with epitope of thrombin. The ECL aptasensot showed an extremely low detection limit of 3.0×10^-16 mol/L for thrombin and a good selectivity. This work demonstrated that using Ppy-pa NPs as a carrier of ruthenium complex and molecular recognition element was a promising approach for the fabrication of ECL biosensor with high sensitivity.
文摘In ion-annihilation electrochemiluminescence(ECL),luminophore ions are generated by oxidation as well as reduction at electrodes surfaces,and subsequently recombine into an electronically excited state,which emits light.The intensity of the emitted light is often limited by the kinetic rate of recombination of the luminophore ion species.Recombination or annihilation rates are high ranging up to approximately 10^(10) M^(−1) s^(−1) and can be difficult to determine using scanning electrochemical microscopy or high-frequency oscillations of an electrode potential.Here,we propose determining annihilation kinetics by measuring the relative change of the emitted light intensity as a function of luminophore concentration.Using finite element simulations of annihilation ECL in a geometry of two closely spaced electrodes biased at constant potentials,we show that,with increasing concentrations,luminescence intensity crosses over from a quadratic dependence on concentration to a linear regime-depending on the rate of annihilation.Our numerical results are applicable to scanning electrochemical microscopy as well as nanofluidic electrochemical devices to determine fast ion-annihilation kinetics.
