The solvent debinding of water soluble binder in powder injection moulding (MIM) was investigated systematically, including the effects of solvent types, temperature and the thickness of green parts on the solvent deb...The solvent debinding of water soluble binder in powder injection moulding (MIM) was investigated systematically, including the effects of solvent types, temperature and the thickness of green parts on the solvent debinding rate. After studying the debinding of a green part with a thickness of 4.26 mm, it was found that, the debinding rate of polyethylene glycol(PEG) in water and alcohol was high initially, and then decreased; however, it would increase with temperature increasing. At room temperature, the dissolution rate of PEG in water was higher than that in alcohol, but the latter would be much faster with temperature increasing because the debinding activation energy in alcohol was 51.44 kJ·mol -1 ·K -1 , much higher than 24.23 kJ·mol -1 ·K -1 in water. With a green part thickness larger than 4.26 mm, the debinding was controlled by diffusion; but with that smaller than 2.36 mm, the debinding was controlled by both dissolution and diffusion.展开更多
Powder metallurgy is a powerful method for the preparation of materials with superior properties.This work aimed to investigate the effect of powder size on the microstructure,mechanical,and corrosion properties of ad...Powder metallurgy is a powerful method for the preparation of materials with superior properties.This work aimed to investigate the effect of powder size on the microstructure,mechanical,and corrosion properties of advanced WE43(Mg-4Y-3REE-Zr)alloy prepared by spark plasma sintering(SPS).At the same time,the effect of HF pre-treatment of the powder on the properties of final compacted products is studied.Smaller powder particles yielded microstructure with more interfaces formed by Y_(2)O_(3),or MgF_(2) and YF_(3).These interfaces work as barriers against corrosion,which greatly improves corrosion resistance.The suggested pre-treatment of powder in HF further reduced the corrosion rate of the compacted materials.On the contrary,fragile interfaces of YF_(3) decreased mechanical properties as the crack primarily propagates through these interfaces.The original powder containing the mixture of all powder fractions exerted the best combination of mechanical properties.Powder size has also shown to affect ignition temperature.The highest ignition temperature was measured for the finest powder fraction.展开更多
A high performance liquid chromatographic method for the simultaneous determination of four fat soluble vitamins: retinol (vitamin A), cholecalciferol(vitamin D), tocopherol(vitamin E) and phylloquinone(vitamin K_1) i...A high performance liquid chromatographic method for the simultaneous determination of four fat soluble vitamins: retinol (vitamin A), cholecalciferol(vitamin D), tocopherol(vitamin E) and phylloquinone(vitamin K_1) in fortified milk powders and egg yolk has been developed. The method requires enzymatic hydrolysis of lipid component of the sample as a pretreatment. Several factors which influence the enzymatic hydrolysis were studied-Separation was achieved using μ-Bondapak C-18 column(3.9×300mm), 98% methanol as mobile phase, a double channel detection was selected; vitamins D_3 E_1 K_1 were detected by UV spectrophotometry (265 nm) first, then vitamin A by fluorometry (EX 325nm, EM 480mm). The retention times of vitamin A_1 D_3, E and K_1 4.87, 9.00, 10.58 and 15.45 min respectively. Detection limit were 0.64, 0.25, 0.50 and 0.07 ng; and the recoveries were 90.5%～103.6% 90.0%～95.6%, 91.7%～98.8%, 91.5%～98.6%, respectively. The vitamins A, D_0, E, K_1 contents in foods were determined satisfactorily.展开更多
A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness...A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness of TiAl alloy at room temperature. The microstructure, phase constitute, fracture surface and fracture toughness were determined by X-ray diffractometry, electron probe micro-analysis, scanning and transmission electron microscopy and mechanical testing. The results show that the sintered samples mainly consist of γ phase, O phase, niobium solid solution （Nbss） phase and B2 phase. The fracture toughness is as high as 28.7 MPa？m1/2 at room temperature. The ductile Nbss phase plays an important role in absorbing the fracture energy in front of the cracks. Moreover, B2 phase can branch the propagation of the cracks. The microhardness of each phase of the composite was also tested.展开更多
TiAl alloy bulk samples with the composition of Ti-45Al-5.5(Cr,Nb,B,Ta) (mole fraction, %) were prepared by high energy mechanical milling and spark plasma sintering (SPS) and then heat treatment. The microstructure a...TiAl alloy bulk samples with the composition of Ti-45Al-5.5(Cr,Nb,B,Ta) (mole fraction, %) were prepared by high energy mechanical milling and spark plasma sintering (SPS) and then heat treatment. The microstructure and mechanical properties after heat treatment of TiAl alloy prepared by SPS at different temperatures were studied. The results showed that the morphology of high energy mechanically milled powder was irregular and the average grain size was about decades micrometers. X-ray diffraction analysis showed that the mechanically milled powder was composed of two phases of TiAl and Ti3Al. The main phase of TiAl and few phases of Ti3Al and TiB2 were observed in the SPS bulk samples of Ti-45Al-5.5(Cr,Nb,B,Ta) alloy. For samples sintered at 900 °C and 1000 °C, the microstructure was duplex structure with some fine equiaxed gamma grains and thin needly TiB2 phases. With the SPS temperature increasing from 900 °C to 1000 °C, the micro-hardness was changed little, the compression strength increased from 1812 MPa to 2275 MPa and the compression ratio increased from 22.66% to 25.59%. The fractography results showed that the compression fracture transform of the SPS Ti-45Al-5.5(Cr,Nb,B,Ta) alloy was rgranular rupture.展开更多
In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distributi...In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distribution of nanocrystalline WC-10Co composite powder and the sintered specimens prepared by SPS plus HIP and by vacuum sintering plus HIP by means of atomic force microscopy （AFM）. The mechanical properties of the sintered specimens were also investigated. It is very easy to find cobalt lakes in the specimen prepared by vacuum sintering plus HIP process. But the microstructure of the specimen prepared by SPS plus HIP is more homogeneous, and the grain size is smaller than that prepared by vacuum sintering plus HIP. The WC-10Co ultrafine cemented carbide consolidated by SPS plus HIP can reach a relative density of 99.4%, and the transverse rupture strength （TRS） is higher than 3540 MPa, the Rockwell A hardness （HRA） is higher than 92.8, the average grain size is smaller than 300 nm, and the WC-10Co ultrafine cemented carbide with excellent properties is achieved. The specimen prepared by SPS with HIP has better properties and microstructure than that prepared by vacuum sintering with HIP.展开更多
The dynamic changes in membrane permeability, activities of disease-related enzymes, and contents of pathogenesis-relevant chemical compounds and photosynthetic pigments in root cells of three watermelon cultivars wer...The dynamic changes in membrane permeability, activities of disease-related enzymes, and contents of pathogenesis-relevant chemical compounds and photosynthetic pigments in root cells of three watermelon cultivars were studied after inoculation with Fusarium oxysporum f. sp. niveum at seedling stage. The results showed that the capacity of self-regulating and returning to normal status of cultivar Kelunsheng (resistant) was greater than that of a susceptible cultivar, Zaohua, in terms of malonaldehyde (MDA) content, relative conductivity, and activity of superoxide dismutase (SOD) and catalase (CAT). The resistant cultivar maintained a higher activity of dehydrogenase, higher content of vitamin C(Vc) , and relatively lower content of soluble sugar than the susceptible cultivar. The content of soluble protein was higher in the resistant cultivar than that in the susceptible one at day 1 after inoculation. The capacities of the resistant cultivar to inhibit chlorophyll deterioration and maintain a higher carotenoid content were significantly stronger than those of the susceptible cultivar.展开更多
Calcium hypochlorite commercially known as bleaching powder is used as a bleaching agent in shrimp processing industries in many countries and known to effect biochemical alteration in shrimp muscle. Studies were, the...Calcium hypochlorite commercially known as bleaching powder is used as a bleaching agent in shrimp processing industries in many countries and known to effect biochemical alteration in shrimp muscle. Studies were, therefore, undertaken to determine their effect in different concentrations viz., 10, 20, 30, 40 and 50 ppm with different time intervals on the quality of head-on, headless shell-on and peeled giant freshwater prawn (Macrobrachium rosenbergii) by determining biochemical and organoleptic aspects. Myofibrillar protein solubility of fresh head-on, headless shell-on and peeled samples were 90.5%, 90% and 88%, respectively indicating a gradual decrease in protein solubility with increasing concentration of bleaching powder. Decrease in protein solubility was also higher in samples kept at longer duration in different concentration of bleaching powder. At a given concentration of 50 ppm for 30 min treatment, the loss of myofibrillar protein was higher (26.14%) in peeled samples than those of head-on and headless shell-on samples (20.44% and 21.11%). Shelf life of bleaching powder treated prawn samples was found to be reduced to 4 - 5 days in iced condition compared to 6 - 7 days for control samples. Peeled samples were also found to be more susceptible to bleaching powder than that of head-on and headless shell-on samples.展开更多
[Objectives]This study was conducted to optimize the soaking conditions of Miao medicine Xiange Zuyu Powder.[Methods]With the water-soluble extract as an investigation index,an L_(9)(3^(4))orthogonal test was carried ...[Objectives]This study was conducted to optimize the soaking conditions of Miao medicine Xiange Zuyu Powder.[Methods]With the water-soluble extract as an investigation index,an L_(9)(3^(4))orthogonal test was carried out to investigate the amount of water added,soaking temperature,soaking times and soaking time,and the best soaking conditions for Xiange Zuyu Powder were screened.[Results]The optimal soaking conditions were as follows:adding 1000 ml of boiling water at 100℃,soaking for 20 min each time,3 times in total.[Conclusions]The soaking scheme is reasonable and can provide a reasonable basis for clinical medication.展开更多
文摘The solvent debinding of water soluble binder in powder injection moulding (MIM) was investigated systematically, including the effects of solvent types, temperature and the thickness of green parts on the solvent debinding rate. After studying the debinding of a green part with a thickness of 4.26 mm, it was found that, the debinding rate of polyethylene glycol(PEG) in water and alcohol was high initially, and then decreased; however, it would increase with temperature increasing. At room temperature, the dissolution rate of PEG in water was higher than that in alcohol, but the latter would be much faster with temperature increasing because the debinding activation energy in alcohol was 51.44 kJ·mol -1 ·K -1 , much higher than 24.23 kJ·mol -1 ·K -1 in water. With a green part thickness larger than 4.26 mm, the debinding was controlled by diffusion; but with that smaller than 2.36 mm, the debinding was controlled by both dissolution and diffusion.
基金The authors wish to thank the Czech Science Foundation(Project No.GA19-08937S)specific university research(A2_FCHT_2020_027 and A1_FCHT_2020_003)for the financial support of this research.
文摘Powder metallurgy is a powerful method for the preparation of materials with superior properties.This work aimed to investigate the effect of powder size on the microstructure,mechanical,and corrosion properties of advanced WE43(Mg-4Y-3REE-Zr)alloy prepared by spark plasma sintering(SPS).At the same time,the effect of HF pre-treatment of the powder on the properties of final compacted products is studied.Smaller powder particles yielded microstructure with more interfaces formed by Y_(2)O_(3),or MgF_(2) and YF_(3).These interfaces work as barriers against corrosion,which greatly improves corrosion resistance.The suggested pre-treatment of powder in HF further reduced the corrosion rate of the compacted materials.On the contrary,fragile interfaces of YF_(3) decreased mechanical properties as the crack primarily propagates through these interfaces.The original powder containing the mixture of all powder fractions exerted the best combination of mechanical properties.Powder size has also shown to affect ignition temperature.The highest ignition temperature was measured for the finest powder fraction.
文摘A high performance liquid chromatographic method for the simultaneous determination of four fat soluble vitamins: retinol (vitamin A), cholecalciferol(vitamin D), tocopherol(vitamin E) and phylloquinone(vitamin K_1) in fortified milk powders and egg yolk has been developed. The method requires enzymatic hydrolysis of lipid component of the sample as a pretreatment. Several factors which influence the enzymatic hydrolysis were studied-Separation was achieved using μ-Bondapak C-18 column(3.9×300mm), 98% methanol as mobile phase, a double channel detection was selected; vitamins D_3 E_1 K_1 were detected by UV spectrophotometry (265 nm) first, then vitamin A by fluorometry (EX 325nm, EM 480mm). The retention times of vitamin A_1 D_3, E and K_1 4.87, 9.00, 10.58 and 15.45 min respectively. Detection limit were 0.64, 0.25, 0.50 and 0.07 ng; and the recoveries were 90.5%～103.6% 90.0%～95.6%, 91.7%～98.8%, 91.5%～98.6%, respectively. The vitamins A, D_0, E, K_1 contents in foods were determined satisfactorily.
基金Project (2011CB605505) supported by the National Basic Research Program of ChinaProject (2008AA03A233) supported by the Hi-tech Research and Development Program of China
文摘A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness of TiAl alloy at room temperature. The microstructure, phase constitute, fracture surface and fracture toughness were determined by X-ray diffractometry, electron probe micro-analysis, scanning and transmission electron microscopy and mechanical testing. The results show that the sintered samples mainly consist of γ phase, O phase, niobium solid solution （Nbss） phase and B2 phase. The fracture toughness is as high as 28.7 MPa？m1/2 at room temperature. The ductile Nbss phase plays an important role in absorbing the fracture energy in front of the cracks. Moreover, B2 phase can branch the propagation of the cracks. The microhardness of each phase of the composite was also tested.
基金Project (51001040) supported by the National Natural Science Foundation of ChinaProject (HITQNJS.2009.022) supported by Development Program for Outstanding Young Teachers in Harbin Institute of TechnologyProject (2012RFQXG109) supported by the Youth Science and Technology Innovation Talents
文摘TiAl alloy bulk samples with the composition of Ti-45Al-5.5(Cr,Nb,B,Ta) (mole fraction, %) were prepared by high energy mechanical milling and spark plasma sintering (SPS) and then heat treatment. The microstructure and mechanical properties after heat treatment of TiAl alloy prepared by SPS at different temperatures were studied. The results showed that the morphology of high energy mechanically milled powder was irregular and the average grain size was about decades micrometers. X-ray diffraction analysis showed that the mechanically milled powder was composed of two phases of TiAl and Ti3Al. The main phase of TiAl and few phases of Ti3Al and TiB2 were observed in the SPS bulk samples of Ti-45Al-5.5(Cr,Nb,B,Ta) alloy. For samples sintered at 900 °C and 1000 °C, the microstructure was duplex structure with some fine equiaxed gamma grains and thin needly TiB2 phases. With the SPS temperature increasing from 900 °C to 1000 °C, the micro-hardness was changed little, the compression strength increased from 1812 MPa to 2275 MPa and the compression ratio increased from 22.66% to 25.59%. The fractography results showed that the compression fracture transform of the SPS Ti-45Al-5.5(Cr,Nb,B,Ta) alloy was rgranular rupture.
基金This work was financially supported by the Postdoctoral Science Foundation of China (No.2003034504),the Open Foundation ofState Key Laboratory of Advanced Technology for Materials Synthesis & Processing, Wuhan University of Technology (2004-2005)and the National High-Tech Research and Development Program of China (No.2002AA302504).
文摘In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distribution of nanocrystalline WC-10Co composite powder and the sintered specimens prepared by SPS plus HIP and by vacuum sintering plus HIP by means of atomic force microscopy （AFM）. The mechanical properties of the sintered specimens were also investigated. It is very easy to find cobalt lakes in the specimen prepared by vacuum sintering plus HIP process. But the microstructure of the specimen prepared by SPS plus HIP is more homogeneous, and the grain size is smaller than that prepared by vacuum sintering plus HIP. The WC-10Co ultrafine cemented carbide consolidated by SPS plus HIP can reach a relative density of 99.4%, and the transverse rupture strength （TRS） is higher than 3540 MPa, the Rockwell A hardness （HRA） is higher than 92.8, the average grain size is smaller than 300 nm, and the WC-10Co ultrafine cemented carbide with excellent properties is achieved. The specimen prepared by SPS with HIP has better properties and microstructure than that prepared by vacuum sintering with HIP.
文摘The dynamic changes in membrane permeability, activities of disease-related enzymes, and contents of pathogenesis-relevant chemical compounds and photosynthetic pigments in root cells of three watermelon cultivars were studied after inoculation with Fusarium oxysporum f. sp. niveum at seedling stage. The results showed that the capacity of self-regulating and returning to normal status of cultivar Kelunsheng (resistant) was greater than that of a susceptible cultivar, Zaohua, in terms of malonaldehyde (MDA) content, relative conductivity, and activity of superoxide dismutase (SOD) and catalase (CAT). The resistant cultivar maintained a higher activity of dehydrogenase, higher content of vitamin C(Vc) , and relatively lower content of soluble sugar than the susceptible cultivar. The content of soluble protein was higher in the resistant cultivar than that in the susceptible one at day 1 after inoculation. The capacities of the resistant cultivar to inhibit chlorophyll deterioration and maintain a higher carotenoid content were significantly stronger than those of the susceptible cultivar.
文摘Calcium hypochlorite commercially known as bleaching powder is used as a bleaching agent in shrimp processing industries in many countries and known to effect biochemical alteration in shrimp muscle. Studies were, therefore, undertaken to determine their effect in different concentrations viz., 10, 20, 30, 40 and 50 ppm with different time intervals on the quality of head-on, headless shell-on and peeled giant freshwater prawn (Macrobrachium rosenbergii) by determining biochemical and organoleptic aspects. Myofibrillar protein solubility of fresh head-on, headless shell-on and peeled samples were 90.5%, 90% and 88%, respectively indicating a gradual decrease in protein solubility with increasing concentration of bleaching powder. Decrease in protein solubility was also higher in samples kept at longer duration in different concentration of bleaching powder. At a given concentration of 50 ppm for 30 min treatment, the loss of myofibrillar protein was higher (26.14%) in peeled samples than those of head-on and headless shell-on samples (20.44% and 21.11%). Shelf life of bleaching powder treated prawn samples was found to be reduced to 4 - 5 days in iced condition compared to 6 - 7 days for control samples. Peeled samples were also found to be more susceptible to bleaching powder than that of head-on and headless shell-on samples.
基金Supported by Intra-college Scientific Research Project of Guizhou University of Traditional Chinese Medicine(3040-040210084,3040-04020001406)。
文摘[Objectives]This study was conducted to optimize the soaking conditions of Miao medicine Xiange Zuyu Powder.[Methods]With the water-soluble extract as an investigation index,an L_(9)(3^(4))orthogonal test was carried out to investigate the amount of water added,soaking temperature,soaking times and soaking time,and the best soaking conditions for Xiange Zuyu Powder were screened.[Results]The optimal soaking conditions were as follows:adding 1000 ml of boiling water at 100℃,soaking for 20 min each time,3 times in total.[Conclusions]The soaking scheme is reasonable and can provide a reasonable basis for clinical medication.
