The adsorption of decylmethylsulfoxide(DEMS)onto carbon black and the effects of temperature,salt(NaCl)and acid (HCl)have been measured.Typical two plateaux type adsorption isotherms were obtained.Applying the two ste...The adsorption of decylmethylsulfoxide(DEMS)onto carbon black and the effects of temperature,salt(NaCl)and acid (HCl)have been measured.Typical two plateaux type adsorption isotherms were obtained.Applying the two step model of surfactant adsorption on solid/liquld interface and the general adsorption isotherm equation[9]the experimental results were interpreted qualitatively and quantitatively.展开更多
There were several first-order kinetic equations used and cited by previous publications (Do,an et al., 2007; Eftekhari et al., 2010; Lagergren, 1898; Kannan and Sundaram, 2001;Ozcan et al., 2006):
Recently, ling et al. (2013) published the paper entitled as above. In Section 2.3, Adsorption kinetics of MBT, authors noticed that "The pseudo first-order kinetic model (Eq. (1)) and the pseudo second-order k...Recently, ling et al. (2013) published the paper entitled as above. In Section 2.3, Adsorption kinetics of MBT, authors noticed that "The pseudo first-order kinetic model (Eq. (1)) and the pseudo second-order kinetic model (Eq. (2))" were used (Do,an et al., 2007; Eftekhari et al., 2010):展开更多
The adsorption isotherms of phenylalanine from aqueous solution on active carbon and silica gel at varying pH,and the influence of inorganic salt upon the ad rption have been studied (at 25℃).The adsorption amount of...The adsorption isotherms of phenylalanine from aqueous solution on active carbon and silica gel at varying pH,and the influence of inorganic salt upon the ad rption have been studied (at 25℃).The adsorption amount of phcnylalanine on the silica gel is very low due to the strong ad- sorption of water by silica gel.The results on the active carbon show:(1)The adsorption is found to be pH-dependent,within pH 4.1—5.1 it increases with pH,within pH 5.1—11.8 it decreases with pH,at pH 5.1 the adsorption reaches its maximum;(2)The phenylalanine is adsorbed mainly in the form of zwitterion;(3)A certain amount of cations and anions of phenylalanine are also adsorbed with van der Waals interaction;(4)After adding NaCl,the adsorption of phenylalanine increases markedly.展开更多
Al-doped carbon nanotubes(Al-doped CNTs) were prepared as a multifunctional integrated material of adsorbent and coagulant aid for organic pollutant removal from aqueous solution. It was observed that aluminum speci...Al-doped carbon nanotubes(Al-doped CNTs) were prepared as a multifunctional integrated material of adsorbent and coagulant aid for organic pollutant removal from aqueous solution. It was observed that aluminum species were dispersed homogeneously on the surface of CNTs, and mainly anchored onto defect structures of the CNTs. The introduction of aluminium efficiently improved adsorption ability for methyl orange(MO) onto the CNTs,and maximum adsorption capacity calculated from the Langmuir isotherm model can reach 69.7 mg/g. The MO adsorption kinetics can be better described by the pseudo-second-order and pore diffusion kinetic models, and the diffusion of MO anions into pores of the Al-doped CNT adsorbent should be the rate-determining step.Thermodynamic analyses indicated that the adsorption of MO onto Al-CNTs-2.0 was endothermic and spontaneous. Moreover, adsorption capacity for MO on the Al-doped CNTs was evidently dependent on the CNT dose, solution p H and adsorbent dose. From the perspective of low-cost and multifunctional, suspension obtained during the Al-doped CNT adsorbent preparation, was tested as coagulant to remove humic acid(HA). A significant observation is that the suspension exhibited an excellent coagulation performance for HA,because abundant aluminous polymer and Al-doped CNTs existed in the suspension.展开更多
A series of MgO-based adsorbents were prepared through solution–combustion synthesis and ball-milling process.The prepared MgO-based powders were characterized using X-ray diffraction,scanning electron microscopy,N_2...A series of MgO-based adsorbents were prepared through solution–combustion synthesis and ball-milling process.The prepared MgO-based powders were characterized using X-ray diffraction,scanning electron microscopy,N_2 physisorption measurements,and employed as potential adsorbents for CO_2 adsorption.The influence of structural and textural properties of these adsorbents over the CO_2 adsorption behaviour was also investigated.The results showed that MgO-based products prepared by solution–combustion and ball-milling processes,were highly porous,fluffy,nanocrystalline structures in nature,which are unique physico-chemical properties that significantly contribute to enhance their CO_2 adsorption.It was found that the MgO synthesized by solution combustion process,using a molar ratio of urea to magnesium nitrate(2:1),and treated by ball-milling during 2.5 hr(MgO-BM2.5h),exhibited the maximum CO_2 adsorption capacity of 1.611 mmol/g at 25℃ and 1 atm,mainly via chemisorption.The CO_2 adsorption behaviour on the MgO-based adsorbents was correlated to their improved specific surface area,total pore volume,pore size distribution and crystallinity.The reusability of synthesized MgO-BM2.5h was confirmed by five consecutive CO_2adsorption–desorption times,without any significant loss of performance,that supports the potential of MgO-based adsorbent.The results confirmed that the special features of MgO prepared by solution–combustion and treated by ball-milling during 2.5 hr are favorable to be used as effective MgO-based adsorbent in post-combustion CO_2 capture technologies.展开更多
文摘The adsorption of decylmethylsulfoxide(DEMS)onto carbon black and the effects of temperature,salt(NaCl)and acid (HCl)have been measured.Typical two plateaux type adsorption isotherms were obtained.Applying the two step model of surfactant adsorption on solid/liquld interface and the general adsorption isotherm equation[9]the experimental results were interpreted qualitatively and quantitatively.
文摘There were several first-order kinetic equations used and cited by previous publications (Do,an et al., 2007; Eftekhari et al., 2010; Lagergren, 1898; Kannan and Sundaram, 2001;Ozcan et al., 2006):
文摘Recently, ling et al. (2013) published the paper entitled as above. In Section 2.3, Adsorption kinetics of MBT, authors noticed that "The pseudo first-order kinetic model (Eq. (1)) and the pseudo second-order kinetic model (Eq. (2))" were used (Do,an et al., 2007; Eftekhari et al., 2010):
文摘The adsorption isotherms of phenylalanine from aqueous solution on active carbon and silica gel at varying pH,and the influence of inorganic salt upon the ad rption have been studied (at 25℃).The adsorption amount of phcnylalanine on the silica gel is very low due to the strong ad- sorption of water by silica gel.The results on the active carbon show:(1)The adsorption is found to be pH-dependent,within pH 4.1—5.1 it increases with pH,within pH 5.1—11.8 it decreases with pH,at pH 5.1 the adsorption reaches its maximum;(2)The phenylalanine is adsorbed mainly in the form of zwitterion;(3)A certain amount of cations and anions of phenylalanine are also adsorbed with van der Waals interaction;(4)After adding NaCl,the adsorption of phenylalanine increases markedly.
基金supported by the National Natural Science Foundation of China(No.21407152)
文摘Al-doped carbon nanotubes(Al-doped CNTs) were prepared as a multifunctional integrated material of adsorbent and coagulant aid for organic pollutant removal from aqueous solution. It was observed that aluminum species were dispersed homogeneously on the surface of CNTs, and mainly anchored onto defect structures of the CNTs. The introduction of aluminium efficiently improved adsorption ability for methyl orange(MO) onto the CNTs,and maximum adsorption capacity calculated from the Langmuir isotherm model can reach 69.7 mg/g. The MO adsorption kinetics can be better described by the pseudo-second-order and pore diffusion kinetic models, and the diffusion of MO anions into pores of the Al-doped CNT adsorbent should be the rate-determining step.Thermodynamic analyses indicated that the adsorption of MO onto Al-CNTs-2.0 was endothermic and spontaneous. Moreover, adsorption capacity for MO on the Al-doped CNTs was evidently dependent on the CNT dose, solution p H and adsorbent dose. From the perspective of low-cost and multifunctional, suspension obtained during the Al-doped CNT adsorbent preparation, was tested as coagulant to remove humic acid(HA). A significant observation is that the suspension exhibited an excellent coagulation performance for HA,because abundant aluminous polymer and Al-doped CNTs existed in the suspension.
基金the National Institute of Nuclear Research(ININ),México,for financial support through project CB-406 stagesⅠ-Ⅲ
文摘A series of MgO-based adsorbents were prepared through solution–combustion synthesis and ball-milling process.The prepared MgO-based powders were characterized using X-ray diffraction,scanning electron microscopy,N_2 physisorption measurements,and employed as potential adsorbents for CO_2 adsorption.The influence of structural and textural properties of these adsorbents over the CO_2 adsorption behaviour was also investigated.The results showed that MgO-based products prepared by solution–combustion and ball-milling processes,were highly porous,fluffy,nanocrystalline structures in nature,which are unique physico-chemical properties that significantly contribute to enhance their CO_2 adsorption.It was found that the MgO synthesized by solution combustion process,using a molar ratio of urea to magnesium nitrate(2:1),and treated by ball-milling during 2.5 hr(MgO-BM2.5h),exhibited the maximum CO_2 adsorption capacity of 1.611 mmol/g at 25℃ and 1 atm,mainly via chemisorption.The CO_2 adsorption behaviour on the MgO-based adsorbents was correlated to their improved specific surface area,total pore volume,pore size distribution and crystallinity.The reusability of synthesized MgO-BM2.5h was confirmed by five consecutive CO_2adsorption–desorption times,without any significant loss of performance,that supports the potential of MgO-based adsorbent.The results confirmed that the special features of MgO prepared by solution–combustion and treated by ball-milling during 2.5 hr are favorable to be used as effective MgO-based adsorbent in post-combustion CO_2 capture technologies.