Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy

Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84.

Synthesis of a highly hydrophobic cyclic decapeptide by solid-phase synthesis of linear peptide and cyclization in solution

A general method was described to synthesize a highly hydrophobic cyclic peptide,cyclo[LWLWLWLWLQ]where underlines indicate D-configuration of the amino acid,by a two-step solid-phase/solution synthesis strategy.The linear decapeptide was assembled by standard Boc chemistry on solid-phase and subsequently cyclized in solution with high efficiency and reproducibility. In subsequent purification by semi-preparative HPLC,50%(v/v) DMF/H_2O was employed as the solvent to overcome the difficulty of solubilization...

Mssbauer Effect in Ultrafine Particles with Fe-C Solid Solution,γ-Fe and Fe_3C Phases

Ultrafine particles prepared by evaporating pure Fe in CH4 atmosphere using arc-dischargeheating method, were found to consist of Fe-C solid solution, γ-Fe and Fe3C phases. EfFect of annealing temperature on phase transformation and hyperfine interactions has been investigated by Mossbauer spectroscopy, X-ray diffraction (XRD), differential thermal analysis and thermogravimetry (DTA-TG), transmission electron microscopy (TEM), oxygen determination and vibrating sample magnetometer (VSM) measurements. It was observed that phase transformation of γ-Fe to α-Fe occurs during annealing in vacuum. The mechanism causing the change of hyperfine interactions with annealing temperature differs for Fe-C solution and interstitial compounds. DifFerence of hyperfine interactions of Fe-C solid solution in the starting sample and its annealed samples is ascribed to the improvement of activation of interstitial carbon atoms. Stress-relieving in structure of annealed Fe3C particle can result in a weak influence on hyperfine interactions. Parameters fitted to the Mossbauer spectra show the existence of superparamagnetism in all the samples. Absorbed and combined oxygen on particle surface of the starting sample were determined.

Synthesis of dimethyl carbonate by gas-phase oxidative carbonylation of methanol in the presence of solid catalyst I. Catalyst preparation and catalytic Properties

The gas-phase synthesis of dimethyl carbonate (DMC) from methanol, carbon monoxide and oXygen has here Studied in a flow system at atomspheric Pressure. A series of Catalyst used in this reaCtion have been prepared and evaluated. The influence of trivared carbon supporters, alkaline metal Promoters and operation conditions on DMC opthesis reaction has been discussed. Under the conditions of 130℃, CO/O2=1 .96, SV=3340h-1, the space-time yield (STY) of DMC over PdCl2-CuCl2-CH3COOK/ac. catalyst is 217g/l-cat h,which is higher than what is published in the literatUre so far.

Solid-phase Synthesis of Acyl-plasminogen-Streptokinase Activator Composite(APSAC) and Its Thrombolytic Properties

The dialysis method has been traditionally used for the conversion of native human plasminogen(Glu-Hpg) to lys-plasminogen(Lys-Hpg). Here is described a solid-phase synthesis method for the preparation of an acyl-plasminogen-streptokinase activator complex(APSAC) from Lys-Hpg, streptokinase(SK) and chemical modification (agent(4-amidinophenyl-4′-aminobenzoate hydrochloride)) with the L-lysine-Sepharose 4B Column as the carrier. The new method significantly increases the product yield and purity over the liquid-phase methods. The APSAC prepared with the new method exhibits a significant thrombolytic effect with a long half-life of about 8.8 h in rabbits.

Liquid-phase synthesis of Li_(2)S and Li_(3)PS_(4) with lithium-based organic solutions

Sulfide solid electrolytes are widely regarded as one of the most promising technical routes to realize all-solid-state batteries(ASSBs)due to their high ionic conductivity and favorable deformability.However,the relatively high price of the crucial starting material,Li_(2)S,results in high costs of sulfide solid electrolytes,limiting their practical application in ASSBs.To solve this problem,we develop a new synthesis route of Li_(2)S via liquid-phase synthesis method,employing lithium and biphenyl in 1,2-dimethoxyethane(DME)ether solvent to form a lithium solution as the lithium precursor.Because of the comparatively strong reducibility of the lithium solution,its reaction with sulfur proceeds effectively even at room temperature.This new synthesis route of Li_(2)S starts with cheap precursors of lithium,sulfur,biphenyl and DME solvent,and the only remaining byproduct(DME solution of biphenyl)after the collection of Li_(2)S product can be recycled and reused.Besides,the reaction can proceed effectively at room temperature with mild condition,reducing energy cost to a great extent.The as-synthesized Li_(2)S owns uniform and extremely small particle size,proved to be feasible in synthesizing sulfide solid electrolytes(such as the solid-state synthesis of Li_(6)PS_(5)C_(l)).Spontaneously,this lithium solution can be directly employed in the synthesis of Li_(3)PS_(4) solid electrolytes via liquid-phase synthesis method,in which the centrifugation and heat treatment processes of Li_(2)S are not necessary,providing simplified production process.The as-synthesized Li_(3)PS_(4) exhibits typical Li+conductivity of 1.85×10^(-4) S·cm^(-1) at 30℃.

Design and Solid-Phase Synthesis of Multiple Muramyl Dipeptide (MMD)

As a non-specific modulator of macrophage, multiplied muramyl dipeptide (MMD) is solid-phase synthesized by application of standard Fmoc chemistry strategy. Tarn's multiple antigen system (MAS) is used as our four branched-linker on Lysine.

Structure Based Library Approach to Photosynthesis Inhibitors:The Solid Phase Synthesis of Hydro-Uracils and Thiouracils

A general method for the solid phase synthesis of hydro-uracils and thiouracils is described. Resino ester 2 reacts with various primary amines to give secondary amines 3, which are converted to the resino ureas (thioureas) 4 by treatment with isocyanates (isothiocyanates). Preparation of the hydro-uracils and thiouracils 5 is achieved by acidic cyclization-cleavage from the resin. The synthesis is designed to be amenable for structure based library approach to photosystem II D1 protein inhibitors.

Synthesis of steel slag ceramics: chemical composition and crystalline phases of raw materials

Two types of porcelain tiles with steel slag as the main raw material （steel slag ceramics） were synthesized based on the CaO-A1203-SiO2 and CaO--MgO-SiO2 systems, and their bending strengths up to 53.47 MPa and 99.84 MPa, respectively, were obtained. The presence of anorthite, a-quartz, magnetite, and pyroxene crystals （augite and diopside） in the steel slag ceramics were very different from the composition of traditional ceramics. X-ray diffraction （XRD） and electron probe X-ray microanalysis （EPMA） results illustrated that the addition of steel slag reduced the temperature of extensive liquid generation and further decreased the firing temperature. The considerable contents of glass-modifying oxide liquids with rather low viscosities at high temperature in the steel slag ceramic adobes promoted element diffusion and crystallization. The results of this study demonstrated a new approach for extensive and effective recycling of steel slag.

Synthesis and Characterization of Magnetic MAX Phase(Cr2-xMnx)GaC

The solid solution of (Cr2-xMnx)GaC with magnetic properties was synthesized by pressureless sintering.The composition,morphology,and magnetic properties of products were characterized by X-ray diffraction (XRD),scanning electron microscopy (SEM),transmission electron microscopy (TEM),and vibrating sample magnetometer (VSM).The experimental results indicate that the solid solubility of Mn is related to the value of x,which reaches the maximum at x=0.4 and the characteristic peaks shift effect is most obvious.After the solution treatments,the samples of (Cr2-xMnx)GaC still presents the layered structure of MAX phase,and the lattice parameter has decreased slightly.By characterizing the magnetic properties of (Cr2-xMnx)GaC,the successful doping of Mn atoms was confirmed,and the intensity of magnetism was positively correlated with the doping amounts of Mn.

Solid-phase synthesis of Cu2MoS4 nanoparticles for degradation of methyl blue under a halogen-tungsten lamp

The Cu_2MoS_4 nanoparticles were prepared using a relatively simple and convenient solid-phase process, which was applied for the first time. The crystalline structure, morphology, and optical properties of Cu_2MoS_4 nanoparticles were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and UV-vis spectrophotometry. Cu_2MoS_4 nanoparticles having a band gap of 1.66 eV exhibits good photocatalytic activity in the degradation of methylene blue, which indicates that this simple process may be critical to facilitate the cheap production of photocatalysts.

A Solid Phase Synthesis of Chalcones by Claisen-Schmidt Condensations

In order to accelerate the development of relatively inexpensive antimalarials that are effective against chloroquine-resistant strains of Plasmodium falciparum, a methodology for the solid phase synthesis of chalcone (1, 3-diphenyl-2-propen-1-one) analogues in reasonably high yields has been developed.

A Facile Solid-phase Synthesis of 3-Carboxycoumarins

Carboxycoumsrins were synthesized via the solid phase synthesis conviently. The resin bound cyclic malonic ester reacted with o-methoxy or o-hydroxybenzaldehydes. Then cyclization was processed under H2SO4 to afford the products in excellent purities and yields.

Solution-phase Synthesis of One-dimensional Semiconductor Nanostructures

The synthesis of one-dimensional （1D） semiconductor nanostructures has been studied intensively for a wide range of materials due to their unique structural and physical properties and promising potential for future technological applications. Among various strategies for synthesizing 1D semiconductor nanostructures, solution-phase synthetic routes are advantageous in terms of cost, throughput, modulation of composition, and the potential for large-scale and environmentally benign production. This article gives a concise review on the recent developments in the solution-phase synthesis of ID semiconductor nanostructures of different compositions, sizes, shapes, and architectures. We first introduce several typical solution-phase synthetic routes based on controlled precipitation from homogeneous solutions, including hydrothermal/solvothermal process, solution-liquid-solid （SLS） process, high-temperature organic-solution process, and low-temperature aqueous-solution process. Subsequently, we discuss two solution-phase synthetic strategies involving solid tem- plates or substrates, such as the chemical transformation of 1D sacrificial templates and the oriented growth of 1D nanostructure arrays on solid substrates. Finally, prospects of the solution-phase approaches to 1D semiconductor nanostructures will be briefly discussed.

Solid-phase Synthesis of PNA Monomer by Ugi Four-component Condensation Reaction

Peptide nucleic acids (PNA) oligomers were synthesized in most cases by peptide synthesis from N-protected monomers. In this work a new method of obtaining PNA monomer by Ugi four-component condensation reaction was tested by solid-phase synthesis. The Fmoc protected PNA monomer was build up with thymin-1-yl acetic acid, 3-methylbutyl aldehyde, Fmoc protected aminoethyl isocyanide and Gly-Wang resin.

APPLICATION OF THE SULFONATE ESTER GROUP AS A LINKER FOR SOLID PHASE ORGANIC SYNTHESIS

A use of Sulfonate ester as a linker in synthesis of (-aminoalkanols was reported. Diols were tethered onto polystyryl sulfonyl chloride resin, yielding sulfonate resins (2). After cleaved by diethyl amine, diisopropylamine and propylamine respectively, three (-aminoalkanols were obtained.

Solid-phase Synthesis of-Haloaldehydes from Polymer-supported 4-(Phenylseleno)morpholine

Polystyrene-supported 4-(phenylseleno)morpholine was synthesized and could be used as an efficient ?selenenylating agent for saturated aldehydes. ?Haloaldehydes were prepared by reaction of polystyrene-supported ?selenoaldehydes with bromine or sulfuryl chloride in good yield and high purity.

Solid-Phase Stereoselective Synthesis of (E)-1, 2-Disubstituted Ethenes from Polymer-Sopported a-Selenoaldehydes

Reaction of polymer-supported a-selenoaldehydes with Grignard reagents afforded polymer-bound B-hydroxyalkyl selenides, which treated with thionyl chloride and triethylamine leading to (E)-1, 2-disubstituted ethenes in good yield.

Solid Phase Synthesis of 4(1H)Quinolones from Resin-Bound Cyclic Malonic Ester

The solid phase synthesis of 4 (1H) quinolones has been reported.