Extraction of Cinnamomum longepaniculatum deciduous leaves essential oil using solvent-free microwave extraction: Process optimization and quality evaluation

The optimal process conditions for solvent-free microwave extraction(SFME)of essential oils from Cinnamomum longepaniculatum deciduous leaves after moisture conditioning were established by response surface methodology(RSM).A Box-Behnken design(BBD)was applied to evaluate the effects of three independent variables:moisture content(A:54%–74%),microwave power(B:300–500 W)and microwave time(C:20–40 min),on the extraction yield of essential oil.The compounds of the essential oils obtained by SFME,hydro-distillation and microwaveassisted hydro-distillation(MADE)were identified by gas chromatography-mass spectrometry(GC-MS),and the total lipids of C.longepaniculatum fresh leaves and deciduous leaves were analyzed.The correlation analysis of the response regression model indicated that quadratic polynomial model could be employed to optimize the extraction of essential oil.The optimal extraction condition was A:58%,B:400 W and C:28 min.In the optimal condition,the maximum extraction yield was 4.475 mL/100 g dw and higher than that by MADE.The main compound of the essential oil was eucalyptol(63.54%),and total oxygenated compounds was 78.95%,mainly caused by SFME and the metabolism of endophytic bacteria with decreasing content of phospholipids and fatty acids.Analysis of variance under the extraction condition illustrated high fitness of the model and the success of RSM for optimizing and reflecting the expected process condition.SFME combined with moisture regulation was an effective method for extracting essential oil from C.longepaniculatum deciduous leaves.

Antioxidant and Antimicrobial Activities of Essential Oils Extracted from Laurus nobilis L.Leaves by Using Solvent-Free Microwave and Hydrodistillation

In this study, laurel essential oils were obtained by using solvent-free microwave extraction (SFME) and hydrodistillation (HD) methods from Laurus nobilis leaves and determined their antioxidant and antimicrobial activity. Extraction time was reduced by about 43% in SFME at 622 W and 67% in SFME at 249 W compared to hydrodistillation. Essential oil of laurel was extracted by SFME at 622 W (100%) and 249 W (40%) power levels and HD inhibited oxidation generated by ABTS radical by 93.88%, 94.13% and 92.06%, respectively. Trolox equivalent antioxidant capacities (TEAC) of essential oils were 0.18 mM/mL oil for SFME at 622 W, 1.36 mM/mL oil for SFME at 249 W and 2.40 mM/mL oil for HD (p < 0.05). Essential oils of L. nobilis were extracted by SFME at 100% and 40% power levels and HD inhibited linoleic acid peroxidation by 70.57%, 63.53% and 89.18% respectively. Inhibition effects of laurel essential oils obtained by SFME at different power levels and HD on DPPH radical cation oxidation were not significantly different. The strongest antioxidant activity against DPPH radical was found in the essential oil obtained by SFME at 100% power level. Essential oils displayed antimicrobial activity against Staphylococcus aureus 6538P, Escherichia coli O157:H7 and Salmonella typhimurium NRRL E 4463 except for Listeria monocytogenes. The inhibitory effect on Staphylococcus aureus 6538P survival of laurel oil obtained from SFME by using lower power level was found to be lower than that obtained from SFME at 100% power level and HD

Kinetic Mechanisms for Preparing Silymarin via Microwave-assisted Extraction

The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thistle seeds increased with the microwave output power and temperature during MAE processing. The apparent extraction rate constant k （s-1） was 1.2028×10-2 , 1.2248×10-2 , and 1.2485×10-2 , and diffusion coefficient D （m2·s-1 ） was 4.21×10-10, 4.29×10-10 , and 4.37×10-10 at the microwave temperatures of 383, 393, and 403 K, respectively, in the silymarin MAE process. With the help of scanning electron microscopy （SEM）, the microstructures of the samples extracted by MAE were observed. The results revealed that the increased efficiency and rate of MAE of silymarin could be attributed mainly to the subsequent cell change resulting from superheating effects during MAE.

Effect of Process Parameters of Microwave Assisted Extraction (MAE) on Polysaccharides Yield from Pumpkin

Process parameters of microwave assisted extraction （MAE） of the polysaccharides from pumpkin viz. extraction temperature, time and liquid-solid ratio were studied by using single factor and response surface methodology method. The results showed that the liquid-solid ratio was the most important factor in polysaccharides yield, followed the extraction temperature was the least important factor. The optimum microwave assisted extraction co by ndi extraction time, and tions for the highest polysaccharides yield from pumpkin （16.76%-4-0.38%） were obtained by using the response surface methodology with extraction time of 29 min, an extraction temperature of 79 ℃ and a liquid-solid ratio of 22 mL·g^-1. Validation experiment result well agreed with predicted value.

Comparison of the mechanisms of microwave roasting and conventional roasting and of their effects on vanadium extraction from stone coal

Experiments comparing microwave blank roasting and conventional blank roasting for typical vanadium-bearing stone coal from Hubei Province in central China, in which vanadium is present in muscovite, were conducted to investigate the effects of roasting tempera- ture, roasting time, H2SO4 concentration, and leaching time on vanadium extraction. The results show that the vanadium leaching efficiency is 84% when the sample is roasted at 800℃ for 30 min by microwave irradiation and the H2SO4 concentration, liquid/solid ratio, leaching temperature, and leaching time are set as 20vo1%, 1.5：1 mL.g-1, 95℃, and 8 h, respectively. However, the vanadium leaching efficiency achieved for the sample subjected to conventional roasting at 900℃ for 60 min is just 71% under the same leaching conditions. Scanning electron microscopy （SEM） analysis shows that the microwave roasted samples contain more cracks and that the particles are more porous compared to the conventionally roasted samples. According to the results of X-ray diffraction （XRD） and Fourier-transform infrared （FTIR） analyses, neither of these roasting methods could completely destroy the mica lattice structure under the experimental conditions; however, both methods deformed the muscovite structure and facilitated the leaching process. Comparing with conventional roasting, microwave roasting causes a greater deformation of the mineral structure at a lower temperature for a shorter roasting time.

Solvent-Free Synthesis of Ultrafine Tungsten Carbide Nanoparticles-Decorated Carbon Nanosheets for Microwave Absorption

Carbides/carbon composites are emerging as a new kind of binary dielectric systems with good microwave absorption performance.Herein,we obtain a series of tungsten carbide/carbon composites through a simple solvent-free strategy,where the solid mixture of dicyandiamide(DCA)and ammonium metatungstate(AM)is employed as the precursor.Ultrafine cubic WC1-x nanoparticles(3-4 nm)are in situ generated and uniformly dispersed on carbon nanosheets.This configuration overcomes some disadvantages of conventional carbides/carbon composites and is greatly helpful for electromagnetic dissipation.It is found that the weight ratio of DCA to AM can regulate chemical composition of these composites,while less impact on the average size of WC1-x nanoparticles.With the increase in carbon nanosheets,the relative complex permittivity and dielectric loss ability are constantly enhanced through conductive loss and polarization relaxation.The different dielectric properties endow these composites with distinguishable attenuation ability and impedance matching.When DCA/AM weight ratio is 6.0,the optimized composite can produce good microwave absorption performance,whose strongest reflection loss intensity reaches up to-55.6 dB at 17.5 GHz and qualified absorption bandwidth covers 3.6-18.0 GHz by manipulating the thickness from 1.0 to 5.0 mm.Such a performance is superior to many conventional carbides/carbon composites.

Microwave-assisted synthesis of asymmetric thiocarbonohydrazones under solvent-free conditions

Six new asymmetric thiocarbonohydrazones 3a-3f were synthesized from following steps： firstly hydrazine hydrate reacted with carbon disulfide to form thiocarbonohydrazide （1） under microwave irradiation. Then compound （1） reacted with ketone and different aldehydes step by step to give 3a-3f with excellent yields under solvent-free conditions using microwave irradiation. Their structures have been determined by elemental analysis, IR, MS and ^1H NMR data. 2009 Qing Han Li. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

An efficient and solvent-free one-pot synthesis of dihydropyrimidinones under microwave irradiation

An efficient synthesis of 3,4-dihydropyrimidin-2(1H)-one derivatives using formic acid as catalyst, from aldehydes, β-ketoester and urea(thiourea) without solvent under the irradiation of microwave is described. Compared with the classical Biginelli reaction, this new method has the advantage of good yields (77–94% for aromatic aldehydes) and short reaction time (3–8 min).

Microwave-assisted synthesis of new N^4-[bi-(4-fluorophenyl)-methyl]-piperazine thiosemicarbazones under solvent-free conditions

Six new N4-[bi-（4-fluorophenyl）-methyl]-piperazine thiosemicarbazones 3a-f have been prepared starting from [bi-（4-fluorophenyl）-methyl]-piperazine in solvent-free condition under microwave irradiation with excellent yields. Their structures have been determined by elemental analysis, IR, MS and 1H NMR data.

An expeditious and one-pot synthesis of unsymmetrical 2,5-disubstituted-1,3,4-oxadiazoles under microwave irradiation and solvent-free conditions

A one-pot synthesis of some unsymmetrical 2,5-disubstituted-1,3,4-oxadiazoles via cyclocondensation of benzoylhydrazines with orthoesters under solvent-free and microwave conditions are described here. The reaction is efficiently catalyzed by silica- supported sulfuric acid as it provided the title compounds in high yields and relatively short times. The catalyst is reusable and can be applied several times without considerable decrease in the yields and rates of the reactions.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Microwave assisted-semi bionic extraction of lignan compounds from Fructus Forsythiae by orthogonal design

Microwave assisted-semi bionic extraction (MASBE) process for lignans from Fructus Forsythiae was studied. The influences of solvent pH value, microwave power, dosage of solvent and irradiation time were investigated. Optimum extracting parameters were determined by orthogonal experiments as follows: pH value of solvent at first extraction is 5.5-6.0, that at the second extraction is 7-8; microwave power is 700 W; mass ratio of Fructus Forsythiae to water is 1-12; irradiation time is 10 min, and extracting times is two. Under these optimal conditions, the yield of lignans reaches 0.364%. Compared with the conventional extraction methods, the MASBE process has the advantages of high extraction rate, high extraction selectivity.

A Rapid and Efficient Synthesis of Diaryl Thioureas via Solvent-Free Reaction Using Microwave

A rapid and efficient method for the preparation of diaryl thiourea compounds was reported for the first time. Twelve diaryl thiourea compounds that possessing biological activity have been synthesized in excellent yields (91-97%). The reaction proved to be extremely simple and highly efficient (in 1.5-4.5 min).

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Application and research advancement on the microwave-assisted extraction

This paper summarized application and research advancement of the microwave-assisted extraction in the agriculture, food industry, environmental analytical chemistry, traditional Chinese medicine industry, and so on. The microwave-assisted extraction was manifested to be a simple device, wide area of application, high extraction efficiency, good reproducibility and low consumption of agent and time as well as low environmental pollution. At present, industrialization question of the microwave-assisted extraction technology has been attached importance, which will impel the microwave-assisted extraction technology to more development in the future

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.