Compensation for diffusion loss of sound wave in sonar system

Sound pressure amplitude will be attenuated with propagation distance in a certain rule when sound wave is propagated in shallow sea.When processing the attenuated signal,time-variant gain circuit is usually used to compensate its diffusion loss.In this paper,spherical diffusion loss is compensated by digital potentiometer and operational circuit and further investigation is also made on compensation of cylindrical diffusion loss and transition from spherical diffusion loss to cylindrical diffusion loss.Finally,a new compensation model is proposed for unknown propagation loss for the purpose of adjusting the dynamic range of signal to meet the requirement of A/D conversion.

Waveform diversity based sonar system for target localization

A new monostatic array system taking advantage of diverse waveforms to improve the performance of underwater tar- get localization is proposed. Unlike the coherent signals between different elements in common active array, the transmitted signals from different elements here are spatially orthogonal waveforms which allow for array processing in the transit mode and result in an extension of array aperture. The mathematical derivation of Capon estimator for this sonar system is described in detail. And the performance of this orthogonal-waveform based sonar is an- alyzed and compared with that of its phased-array counterpart by water tank experiments. Experimental results show that this sonar system could achieve 12 dB-15 dB additional array gain over its phased-array counterpart, which means a doubling of maximum detection range. Moreover, the angular resolution is significantly improved at lower SNR.

High-resolution swath bathymetry using MIMO sonar system

For increasing the cross-track resolution, the multiple input multiple output （MIMO） technique is introduced into the swath bathymetry system and a new swath bathymetry approach using MIMO sonar is proposed. The MIMO sonar is composed of two parallel transmitting uniform linear arrays （ULAs） and a receiving ULA which is perpendicular to the former. The spacing between the two transmitting ULAs is equal to the product of the receiving sensor number and the receiving inter-sensor spacing. Furthermore, two narrowband linear frequency modulation （LFM） pulses, sharing the same frequency band but with opposite modulation slopes, are used as transmitting waveforms of the two transmitting ULAs. With such an array layout and transmitting signals, the MIMO sonar can sound a swath with the cross-track resolution doubling that of the traditional multibeam sonar using a Mills cross array. Numerical examples are provided to verify the effectiveness of the proposed approach.

An Efficient Acoustic Scattering Model Based on Target Surface Statistical Descriptors for Synthetic Aperture Sonar Systems

Acoustic scattering as the perturbation of an incident acoustic field from an arbitrary object is a critical part of the targetrecognition process in synthetic aperture sonar(SAS)systems.The complexity of scattering models strongly depends on the size and structure of the scattered surface.In accurate scattering models including numerical models,the computational cost significantly increases with the object complexity.In this paper,an efficient model is proposed to calculate the acoustic scattering from underwater objects with less computational cost and time compared with numerical models,especially in 3D space.The proposed model,called texture element method(TEM),uses statistical and structural information of the target surface texture by employing non-uniform elements described with local binary pattern(LBP)descriptors by solving the Helmholtz integral equation.The proposed model is compared with two other well-known models,one numerical and other analytical,and the results show excellent agreement between them while the proposed model requires fewer elements.This demonstrates the ability of the proposed model to work with arbitrary targets in different SAS systems with better computational time and cost,enabling the proposed model to be applied in real environment.

A SIGNAL PROCESSING SCHEME TO IMPROVE THE PERFORMANCE OF SOME SONAR SYSTEMS

Some statistical characteristics of signal and noise in shallow-water acoustical channel were analysed . Based on the differences in some statistical characteristics between the signal and the noise , the authors developed a new kind of signal processing technique-digital time correlative accumulation to operate sonar systems at a low data rate . Theoretical analyses and expermental results show . the false-alarm probability can be reduced to a low value of less than 10 -4 while the detection probability can reach a relatively high value of more than 0.9. By using the statistical averages of the multiple range detection value , the authors can greatly improve the accuracy of the detection . The method can be used for some other related fields, for example , ultrasonic detection in air medium .

An Underwater Robot Inspection Anomaly Localization Feedback System Based on Sonar Technology

This article introduces an underwater robot inspection anomaly localization feedback system comprising a real-time water surface tracking,detection,and positioning system located on the water surface,while the underwater robot inspection anomaly feedback system is housed within the underwater robot.The system facilitates the issuance of corresponding mechanical responses based on the water surface’s real-time tracking,detection,and positioning,enabling recognition and feedback of anomaly information.Through sonar technology,the underwater robot inspection anomaly feedback system monitors the underwater robot in real-time,triggering responsive actions upon encountering anomalies.The real-time tracking,detection,and positioning system from the water surface identifies abnormal conditions of underwater robots based on changes in sonar images,subsequently notifying personnel for necessary intervention.

渔业声学数据后处理软件现状评述与展望:以Sonar5-Pro为例

渔业声学数据解析是渔业资源声学调查研究和应用的关键所在。目前全球渔业声学数据后处理的代表性软件主要有挪威Sonar5-Pro和澳大利亚Echoview。以Sonar5-Pro为例,开展了5个方面的研究:1)回顾了该软件自1994年以来近30年的发展历史;2)介绍了软件对声学数据进行处理的总体思路,即前处理、数据分析和结果展示3个步骤及贯穿始终的数据检视功能,以及软件的5项重要设计理念;3)介绍了该软件9项代表性功能特性的实现思路和具体方法;4)以主流分析应用鱼类生物量分析过程为例,介绍了软件的数据处理流程;5)对该软件的3项核心关键技术,即多目标跟踪(multiple target tracking)、交叉过滤跟踪(crossfilter tracker)和图像分析工具(image analysis)进行了详细介绍。研究发现,一个成熟的渔业声学数据后处理系统庞大而复杂,涉及渔业、物理学和计算机多学科知识的融合,着力加强相关领域交叉学科人才培养,充分借鉴吸收国外已有先进理念和成熟技术,基于各种应用场景需求研发具有自主知识产权的分析软件,采用引进消化吸收再逐点突破最终集成创新的方式,可以作为未来提升中国渔业声学数据解析能力和水平的重要发展途径。

RepDNet:A re-parameterization despeckling network for autonomous underwater side-scan sonar imaging with prior-knowledge customized convolution

Side-scan sonar(SSS)is now a prevalent instrument for large-scale seafloor topography measurements,deployable on an autonomous underwater vehicle(AUV)to execute fully automated underwater acoustic scanning imaging along a predetermined trajectory.However,SSS images often suffer from speckle noise caused by mutual interference between echoes,and limited AUV computational resources further hinder noise suppression.Existing approaches for SSS image processing and speckle noise reduction rely heavily on complex network structures and fail to combine the benefits of deep learning and domain knowledge.To address the problem,Rep DNet,a novel and effective despeckling convolutional neural network is proposed.Rep DNet introduces two re-parameterized blocks:the Pixel Smoothing Block(PSB)and Edge Enhancement Block(EEB),preserving edge information while attenuating speckle noise.During training,PSB and EEB manifest as double-layered multi-branch structures,integrating first-order and secondorder derivatives and smoothing functions.During inference,the branches are re-parameterized into a 3×3 convolution,enabling efficient inference without sacrificing accuracy.Rep DNet comprises three computational operations:3×3 convolution,element-wise summation and Rectified Linear Unit activation.Evaluations on benchmark datasets,a real SSS dataset and Data collected at Lake Mulan aestablish Rep DNet as a well-balanced network,meeting the AUV computational constraints in terms of performance and latency.

如何利用Jenkins与Sonar提升产品内在质量

对于软件工程而言,我们的内外部质量是什么呢?对客户、最终用户、间接用户的需求满足程度即是产品的外部质量。软件的内部质量,即产品架构的合理性,可扩展性,代码的规范性,可读性,简洁度,组件重用等等,这些质量属性往往对客户是不可见的。在公司内对代码的编写要求遵守编码规范,对于设计要求符合基本的设计原则,这些都是软件的内部质量!

Target localization and parameters estimation by sonar system with explosions as underwater sound sources

Underwater target localization and parameters(azimuth and range) estimation by the method of utilizing explosions as underwater sound sources are described in this paper.The narrow beam reverberation model of the target echo signal is researched to estimate the target azimuth in reverberation background.Estimation errors of target azimuth and range are studied and proved to approximately meet Gauss distribution.Then the variance formula of target range error is deduced.Simulation experiments are applied to research the target range error and its standard deviation,and a series of measures to improve the estimation accuracy of target range are proposed.It is confirmed by the data processing results of simulations and lake experiments that the proposed method can accurately locate underwater target at a long distance on the condition of a certain underwater explosion range error.

Target recognition algorithm for passive sonar system with high generalization ability

A new algorithm based on a Supervised Self-Organizing neural network for the pas sive sonar target recognition was proposed. Because of the incompleteness of the passive sonar exemplar set, the algorithm introduced a Multi-Activation-function structure and Supervised Self-Organizing competitive learning algorithm into the classic feed-forward neural networks,and obviously improved the generalization ability in target recognition. Besides, it can effi ciently reduce the learning time and avoid the local optimum. The recognition experiments of realistic passive sonar signals show that this new algorithm has good generalization ability and high recognition rate

Development and application of a pipeline sonar system

Based on the principle of active sonar detection, a pipeline sonar system has been developed for detecting the water accumulated in underground gas-pipelines, and the effectiveness of this system verified through field-testing. The working process, experimental results and some considerations in the determination of sonar parameters are described in this paper.

Optimal configuration of bistatic sonar system using Cramér-Rao lower bound of position estimation

In order to study the optimization configuration problem of bistatic sonar system,the optimal configuration model of bistatic sonar system was established.The positioning accuracy of the dual-base sonar at different dual-base angles was obtained by calculating the Cramér-Rao lower bound(CRLB)accuracy based on the optimal configuration model.The effect of system time measurement error and angle measurement error on positioning accuracy was analyzed by simulation.The transmitting and receiving sonar are deployed on the same circle centered on the target in the simulation.The results showed that the positioning accuracy was the highest at the bistatic angle of 2π/3.This research had certain reference for the optimal configuration of bistatic/multistatic sonar system.

YOLOv5-Based Seabed Sediment Recognition Method for Side-Scan Sonar Imagery

Seabed sediment recognition is vital for the exploitation of marine resources.Side-scan sonar(SSS)is an excellent tool for acquiring the imagery of seafloor topography.Combined with ocean surface sampling,it provides detailed and accurate images of marine substrate features.Most of the processing of SSS imagery works around limited sampling stations and requires manual interpretation to complete the classification of seabed sediment imagery.In complex sea areas,with manual interpretation,small targets are often lost due to a large amount of information.To date,studies related to the automatic recognition of seabed sediments are still few.This paper proposes a seabed sediment recognition method based on You Only Look Once version 5 and SSS imagery to perform real-time sedi-ment classification and localization for accuracy,particularly on small targets and faster speeds.We used methods such as changing the dataset size,epoch,and optimizer and adding multiscale training to overcome the challenges of having a small sample and a low accuracy.With these methods,we improved the results on mean average precision by 8.98%and F1 score by 11.12%compared with the original method.In addition,the detection speed was approximately 100 frames per second,which is faster than that of previous methods.This speed enabled us to achieve real-time seabed sediment recognition from SSS imagery.

A new data acquisition and processing system for profiling sonar

A multi-beam chirp sonar based on IP connections and DSP processing nodes was proposed and designed to provide an expandable system with high-speed processing and mass-storage of real-time signals for multi-beam profiling sonar.The system was designed for seabed petroleum pipeline detection and orientation,and can receive echo signals and process the data in real time,refreshing the display 10 times per second.Every node of the chirp sonar connects with data processing nodes through TCP/IP. Merely by adding nodes,the system’s processing ability can be increased proportionately without changing the software.System debugging and experimental testing proved the system to be practical and stable.This design provides a new method for high speed active sonar.

Sonar Image Processing System for an Autonomous Underwater Vehicle(AUV)

Sonar image processing system is an important intelligent system of Autonomous Un-derwater Vehicle.Based on TMS320C30 high speed DSP,it is used to realize sonar imagecompression and underwater object detections including obstacle recognition in real time.Inthis paper,the software and hardware designs of this system are introduced and the experi-mental results are given.

Digital Beamforming by Multiple Chirp Zeta Transforms for 3-D Sonar Imaging Systems

The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms （MCZT） beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform （CZT） in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.

The San Juan Islands Thrust System： New Perspectives from LIDAR and Sonar Imagery

New LIDAR （Light Detection and Ranging） and sonar imagery have revealed remarkable geomorphic details never seen before and not visible by any other means. Numerous faults and other geologic structures are plainly visible on LIDAR and sonar images. Many previously unknown faults criss-cross the islands and large fault scarps are visible on sonar imagery along the margins of the larger islands. Sonar images of sea floor morphology show many submerged faults as long linear scarps with relief up to 300m （1,000 fl）, some of which visibly truncate geologic structures. The San Juan Lopez fault, the largest fault in the islands, extends for at least 65 km （40 mi） from Stuart Island to Rosario strait with a scarp up to 330m （1,000 it） high. Since 1975, the basic structural framework of the San Juan Islands has been considered to consist of five stacked thrust faults, the Rosario, Orcas, Haro, Lopez, and Buck Bay faults, constituting the San Juan Thrust （Nappe） System that has shuffled together far distant terranes. However, the new LIDAR and sonar imagery shows that most of the mapped extent of these postulated faults are actually segments of high angle, dipslip faults and are not thrust faults at all. Thus, the San Juan Thrust （Nappe） System does not exist. The age of these faults is not accurately known and more than one period of high angle faulting may have occurred. Faults shown on L1DAR images of the surface of the islands appear as visible gashes, etched out by erosion of fault zones with few fault scarps. However, the sea floor faults have bold relief and high scarps. A late Pleistocene moraine lies undisturbed across the San Juan Lopez fault.

Compensating for intensity loss in a large-aperture MIMO sonar imaging system

To reduce the computation burden of a large-aperture multiple-input multiple-output（MIMO） sonar imaging system,the phase-shift beamformer（PSBF） is used at the cost of bringing the intensity loss（IL）.The cause of the IL is analyzed in detail and a variable termed as IL factor is defined to quantify the loss amount.To compensate for the IL,two methods termed as intensity compensation for the PSBF（IC-PSBF） and the hybrid beamforming（HBF）,respectively,are proposed.The IC-PSBF uses previously estimated IL factors to compensate for output intensities of all PSBFs;and the HBF applies the IC-PSBF to the center beam region and the shifted-sideband beamformer（SSBF） to the side beam region,respectively.Numerical simulations demonstrate the effectiveness of the two proposed methods.

Improving Yolo5 for Real-Time Detection of Small Targets in Side Scan Sonar Images

Side scan sonar(SSS)is an important means to detect and locate seafloor targets.Autonomous underwater vehicles(AUVs)carrying SSS stay near the seafloor to obtain high-resolution images and provide the outline of the target for observers.The target feature information of an SSS image is similar to the background information,and a small target has less pixel information;therefore,accu-rately identifying and locating small targets in SSS images is challenging.We collect the SSS images of iron metal balls(with a diameter of 1m)and rocks to solve the problem of target misclassification.Thus,the dataset contains two types of targets,namely,‘ball’and‘rock’.With the aim to enable AUVs to accurately and automatically identify small underwater targets in SSS images,this study designs a multisize parallel convolution module embedded in state-of-the-art Yolo5.An attention mechanism transformer and a convolutional block attention module are also introduced to compare their contributions to small target detection accuracy.The performance of the proposed method is further evaluated by taking the lightweight networks Mobilenet3 and Shufflenet2 as the backbone network of Yolo5.This study focuses on the performance of convolutional neural networks for the detection of small targets in SSS images,while another comparison experiment is carried out using traditional HOG+SVM to highlight the neural network’s ability.This study aims to improve the detection accuracy while ensuring the model efficiency to meet the real-time working requirements of AUV target detection.