Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data...Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data processing method and software have been applied to the Tahe oilfield in Northern West China to provide guidance to acid hydraulic fracturing design and evaluation. In this paper, we present the field examples of such data processing and applications to demonstrate the validity and advantages of our method and software package.展开更多
This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous v...This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous values of the Poisson’s ratio derived from the velocity profiles suggested that the boreholes might have traversed slow formations(i.e.with shear wave velocity smaller than the borehole fluid compressional wave velocity or“mud-wave speed”)and that conventional processing of the sonic logs might have misinterpreted the direct arrivals of fluid acoustic waves as arrivals caused by shear wave propagation in the rock.Consequently,the shear wave velocity profiles provided by the contractor were considered to be unreliable by the project team.To address these problems,a non-conventional determination of the shear wave velocity was implemented,based on the relationship between the Poisson’s ratio of the rock formation and the shape of the first train of sonic waves which arrived to the receivers in the sonic probe.The relationship was determined based on several hundreds of finite element simulations of the acoustic wave propagation in boreholes with the same diameter as used in the perforations.The present article describes how this non-conventional approach was developed and implemented to obtain the shear wave velocity profiles from the raw sonic logs.The approach allows an extension of the range of applicability of full-wave sonic logging to determination of shear wave velocity profiles in formations with low compressional wave velocities.The method could be used to obtain shear wave velocity profiles where compressional wave velocity is as low as slightly larger than the mud-wave speed.A sample sonic log in Log ASCII Standard(LAS)format is provided as supplementary material to this paper via Mendeley Data,together with the FORTRAN source code used to process the log following the approach described in this study.展开更多
Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole resp...Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole response law of the Qingshankou shale were studied using experimental measurements.Analyses show that the anisotropy parametersϵandγin the study region are greater than 0.4,whereas the anisotropy parameterδis smaller,generally 0.1.Numerical simulations show that the longitudinal and transverse wave velocities of these strong anisotropic rocks vary significantly with inclination angle,and significant differences in group velocity and phase velocity are also present.Acoustic logging measures the group velocity in dipped boreholes;this differs from the phase velocity to some extent.As the dip angle increases,the longitudinal and SH wave velocities increase accordingly,while the qSV-wave velocity initially increases and then decreases,reaching its maximum value at a dip of approximately 40°.These results provide an effective guide for the correction and modeling of acoustic logging time differences in the region.展开更多
During the Indian National Gas Hydrate Program(NGHP)Expedition 02,Logging-while-drilling(LWD)logs were acquired at three sites(NGHP-02-11,NGHP-02-12,and NGHP-02-13)across the Mahanadi Basin in area A.We applied rock p...During the Indian National Gas Hydrate Program(NGHP)Expedition 02,Logging-while-drilling(LWD)logs were acquired at three sites(NGHP-02-11,NGHP-02-12,and NGHP-02-13)across the Mahanadi Basin in area A.We applied rock physics theory to available sonic velocity logs to know the distribution of gas hydrate at site NGHP-02-11 and NGHP-02-13.Rock physics modeling using sonic velocity at well location shows that gas hydrate is distributed mainly within the depth intervals of 150-265 m and 100 -215 mbsf at site NGHP-02-11 and NGHP-02-13,respectively,with an average saturation of about 4%of the pore space and the maximum concentration of about 40%of the pore space at 250 m depth at site NGHP-02-11,and at site NGHP-02-13 an average saturation of about 2%of the pore space and the maximum concentration of about 20%of the pore space at 246 m depth,as gas hydrate is distributed mainly within 100-246 mbsf at this site.Saturation of gas hydrate estimated from the electrical resistivity method using density derived porosity and electrical resistivity logs from Archie's empirical formula shows high saturation compared to that from the sonic log.However,estimates of hydrate saturation based on sonic P-wave velocity may differ significantly from that based on resistivity,because gas and hydrate have higher resistivity than conductive pore fluid and sonic P-wave velocity shows strong effect on gas hydrate as a small amount of gas reduces the velocity significantly while increasing velocity due to the presence of hydrate.At site NGHP-02-11,gas hydrate saturation is in the range of 15%e30%,in two zones between 150-180 and 245-265 mbsf.Site NGHP-02-012 shows a gas hydrate saturation of 20%e30%in the zone between 100 and 207 mbsf.Site NGHP-02-13 shows a gas hydrate saturation up to 30%in the zone between 215 and 246 mbsf.Combined observations from rock physics modeling and Archie’s approximation show the gas hydrate concentrations are relatively low(<4%of the pore space)at the sites of the Mahanadi Basin in the turbidite channel system.展开更多
基金This project is sponsored by Natural Science Foundation of China supported project No. 50674098.
文摘Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data processing method and software have been applied to the Tahe oilfield in Northern West China to provide guidance to acid hydraulic fracturing design and evaluation. In this paper, we present the field examples of such data processing and applications to demonstrate the validity and advantages of our method and software package.
文摘This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous values of the Poisson’s ratio derived from the velocity profiles suggested that the boreholes might have traversed slow formations(i.e.with shear wave velocity smaller than the borehole fluid compressional wave velocity or“mud-wave speed”)and that conventional processing of the sonic logs might have misinterpreted the direct arrivals of fluid acoustic waves as arrivals caused by shear wave propagation in the rock.Consequently,the shear wave velocity profiles provided by the contractor were considered to be unreliable by the project team.To address these problems,a non-conventional determination of the shear wave velocity was implemented,based on the relationship between the Poisson’s ratio of the rock formation and the shape of the first train of sonic waves which arrived to the receivers in the sonic probe.The relationship was determined based on several hundreds of finite element simulations of the acoustic wave propagation in boreholes with the same diameter as used in the perforations.The present article describes how this non-conventional approach was developed and implemented to obtain the shear wave velocity profiles from the raw sonic logs.The approach allows an extension of the range of applicability of full-wave sonic logging to determination of shear wave velocity profiles in formations with low compressional wave velocities.The method could be used to obtain shear wave velocity profiles where compressional wave velocity is as low as slightly larger than the mud-wave speed.A sample sonic log in Log ASCII Standard(LAS)format is provided as supplementary material to this paper via Mendeley Data,together with the FORTRAN source code used to process the log following the approach described in this study.
基金supported by Major Science and Technology Special Project of China National Petroleum Corporation"Research on Large scale Storage and Production Increase and Exploration and Development Technology of Continental Shale Oil"(2023ZZ15)。
文摘Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole response law of the Qingshankou shale were studied using experimental measurements.Analyses show that the anisotropy parametersϵandγin the study region are greater than 0.4,whereas the anisotropy parameterδis smaller,generally 0.1.Numerical simulations show that the longitudinal and transverse wave velocities of these strong anisotropic rocks vary significantly with inclination angle,and significant differences in group velocity and phase velocity are also present.Acoustic logging measures the group velocity in dipped boreholes;this differs from the phase velocity to some extent.As the dip angle increases,the longitudinal and SH wave velocities increase accordingly,while the qSV-wave velocity initially increases and then decreases,reaching its maximum value at a dip of approximately 40°.These results provide an effective guide for the correction and modeling of acoustic logging time differences in the region.
文摘During the Indian National Gas Hydrate Program(NGHP)Expedition 02,Logging-while-drilling(LWD)logs were acquired at three sites(NGHP-02-11,NGHP-02-12,and NGHP-02-13)across the Mahanadi Basin in area A.We applied rock physics theory to available sonic velocity logs to know the distribution of gas hydrate at site NGHP-02-11 and NGHP-02-13.Rock physics modeling using sonic velocity at well location shows that gas hydrate is distributed mainly within the depth intervals of 150-265 m and 100 -215 mbsf at site NGHP-02-11 and NGHP-02-13,respectively,with an average saturation of about 4%of the pore space and the maximum concentration of about 40%of the pore space at 250 m depth at site NGHP-02-11,and at site NGHP-02-13 an average saturation of about 2%of the pore space and the maximum concentration of about 20%of the pore space at 246 m depth,as gas hydrate is distributed mainly within 100-246 mbsf at this site.Saturation of gas hydrate estimated from the electrical resistivity method using density derived porosity and electrical resistivity logs from Archie's empirical formula shows high saturation compared to that from the sonic log.However,estimates of hydrate saturation based on sonic P-wave velocity may differ significantly from that based on resistivity,because gas and hydrate have higher resistivity than conductive pore fluid and sonic P-wave velocity shows strong effect on gas hydrate as a small amount of gas reduces the velocity significantly while increasing velocity due to the presence of hydrate.At site NGHP-02-11,gas hydrate saturation is in the range of 15%e30%,in two zones between 150-180 and 245-265 mbsf.Site NGHP-02-012 shows a gas hydrate saturation of 20%e30%in the zone between 100 and 207 mbsf.Site NGHP-02-13 shows a gas hydrate saturation up to 30%in the zone between 215 and 246 mbsf.Combined observations from rock physics modeling and Archie’s approximation show the gas hydrate concentrations are relatively low(<4%of the pore space)at the sites of the Mahanadi Basin in the turbidite channel system.
