ST-LSTM-SA:A New Ocean Sound Velocity Field Prediction Model Based on Deep Learning

The scarcity of in-situ ocean observations poses a challenge for real-time information acquisition in the ocean.Among the crucial hydroacoustic environmental parameters,ocean sound velocity exhibits significant spatial and temporal variability and it is highly relevant to oceanic research.In this study,we propose a new data-driven approach,leveraging deep learning techniques,for the prediction of sound velocity fields(SVFs).Our novel spatiotemporal prediction model,STLSTM-SA,combines Spatiotemporal Long Short-Term Memory(ST-LSTM) with a self-attention mechanism to enable accurate and real-time prediction of SVFs.To circumvent the limited amount of observational data,we employ transfer learning by first training the model using reanalysis datasets,followed by fine-tuning it using in-situ analysis data to obtain the final prediction model.By utilizing the historical 12-month SVFs as input,our model predicts the SVFs for the subsequent three months.We compare the performance of five models:Artificial Neural Networks(ANN),Long ShortTerm Memory(LSTM),Convolutional LSTM(ConvLSTM),ST-LSTM,and our proposed ST-LSTM-SA model in a test experiment spanning 2019 to 2022.Our results demonstrate that the ST-LSTM-SA model significantly improves the prediction accuracy and stability of sound velocity in both temporal and spatial dimensions.The ST-LSTM-SA model not only accurately predicts the ocean sound velocity field(SVF),but also provides valuable insights for spatiotemporal prediction of other oceanic environmental variables.

Relationship between polyhedral structures formed by tangent planes of ellipsoidal particles and system sound velocity

Internal polyhedral structures of a granular system can be investigated using the Voronoi tessellations.This technique has gained increasing recognition in research of kinetic properties of granular flows.For systems with mono-sized spherical particles,Voronoi tessellations can be utilized,while radial Voronoi tessellations are necessary for analyzing systems with multi-sized spherical particles.However,research about polyhedral structures of non-spherical particle systems is limited.We utilize the discrete element method to simulate a system of ellipsoidal particles,defined by the equation(x a)2+(y1)2+(z 1/a)2=1,where a ranges from 1.1 to 2.0.The system is then dissected by using tangent planes at the contact points,and the geometric quantities of the resulting polyhedra in different shaped systems,such as surface area,volume,number of vertices,number of edges,and number of faces,are calculated.Meanwhile,the longitudinal and transverse wave velocities within the system are calculated with the time-of-flight method.The results demonstrate a strong correlation between the sound velocity of the system and the geometry of the dissected polyhedra.The sound velocity of the system increases with the increase in a,peaking at a=1.3,and then decreases as a continues to increase.The average volume,surface area,number of vertices,number of edges,and number of faces of the polyhedra decrease with the increase in sound velocity.That is,these quantities initially decrease with the increase in a,reaching minima at a=1.3,and then increase with further increase of a.The relationship between sound velocity and the geometric quantities of the dissected polyhedra can serve as a reference for acoustic material design.

The hcp-bcc transition of Be via anisotropy of modulus and sound velocity

Based on ab initio calculations,we utilize the mean-field potential approach with the quantum modification in conjunction with stress–strain relation to investigate the elastic anisotropies and sound velocities of hcp and bcc Be under high-temperature(0–6000 K)and high-pressure(0–500 GPa)conditions.We propose a general definition of anisotropy for elastic moduli and sound velocities.Results suggest that the elastic anisotropy of Be is more significantly influenced by pressure than by temperature.The pressure-induced increase of c/a ratio makes the anisotropy of hcp Be significantly strengthen.Nevertheless,the hcp Be still exhibits smaller anisotropy than bcc Be in terms of elastic moduli and sound velocities.We suggest that measuring the anisotropy in shear sound velocity may be an approach to distinguishing the hcp–bcc phase transition under extreme conditions.

An improved algorithm based on equivalent sound velocity profile method at large incident angle

With the development of ultra-wide coverage technology,multibeam echo-sounder(MBES)system has put forward higher requirements for localization accuracy and computational efficiency of ray tracing method.The classical equivalent sound speed profile(ESSP)method replaces the measured sound velocity profile(SVP)with a simple constant gradient SVP,reducing the computational workload of beam positioning.However,in deep-sea environment,the depth measurement error of this method rapidly increases from the central beam to the edge beam.By analyzing the positioning error of the ESSP method at edge beam,it is discovered that the positioning error increases monotonically with the incident angle,and the relationship between them could be expressed by polynomial function.Therefore,an error correction algorithm based on polynomial fitting is obtained.The simulation experiment conducted on an inclined seafloor shows that the proposed algorithm exhibits comparable efficiency to the original ESSP method,while significantly improving bathymetry accuracy by nearly eight times in the edge beam.

Influence of Microstructure Change of Seafloor Sediments on the Sound Velocity in them in the Course of Stress-strain

Test tools and methods for synchronizing acoustic measurements in the course of stress-strain for seafloor sediment are elaborated and the test data of 45 sediment samples from the seafloor in the South China Sea are analysed. The result shows that the coarser the sediment grains are, the smaller the porosity is and the larger the unconfined compression strength is, the higher the sound velocity is. In the course of stress-strain, the sediment sound velocity varies obviously with the stress. Acoustic characteristics of sediment in different strain phases and the influence of sediment microstructure change on its sound velocity are discussed. This study will be of important significance for surveying wells of petroleum geology and evaluating the base stabilization of seafloor engineering.

Research on Volume Identification with the Method of Discharging at the Velocity of Sound

The method of volume identification in pneumatics was studied through theoretical analysis and experimental investigation. Regarding discharging from a container as a thermodynamic process with invariable index the dependence of the container’s volume on the pressure in the container and the index, during discharging at the velocity of sound, is deduced. Then through a lot of experiments, the value of index n of the process is found with a given precision and a specified volume range. Furthermore, the feasibility and practicability of this method are verified by experiments.

Sound velocity and related properties of seafloor sediments in the Bering Sea and Chukchi Sea

The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 kHz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35-250 kHz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafioor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafioor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given.

Influence of Environmental Conditions on the Sound Velocity Ratio of Seafloor Surficial Sediment

In this work,we investigated the influences of salinity,temperature,and hydrostatic pressure on the acoustics of seafloor surficial sediment by theoretically and experimentally analyzing the sound velocity ratio of the seafloor sediment to the bottom sea-water in typical environmental conditions.Temperature-and pressure-controlled experiments were conducted to examine the charac-teristics of the sound velocity ratio,the results of which agree with the theoretical analysis using the effective density fluid model.Of the three environmental factors considered,the sound velocity ratio was found to be sensitive to temperature and pressure but not to salinity,with the sound velocity ratio decreasing with temperature and hydrostatic pressure.With respect to surficial sediments,pore water plays a key role in the sound velocity ratio of sediment influenced by different environmental factors.The sound velocities of different types of sediments(sandy,silty,and clayey)change similarly with temperature,but change slightly differently with hydro-static pressure.The influence of environmental factors on the sound velocity ratio of seafloor sediment is independent of the detec-tion frequency.The results show that the sound velocity ratio can change up to 0.0008 per℃ when the temperature ranges from 2℃ to 25℃ and up to 0.00064MPa−1 when the seawater depth pressure ranges from 0MPa to 40MPa.

The sound velocity and bulk properties of sediments in the Bohai Sea and the Yellow Sea of China

In order to investigate the correlation between a sound velocity and sediment bulk properties and explore the influence of frequency dependence of the sound velocity on the prediction of the sediment properties by the sound velocity, a compressional wave velocity is measured at frequencies of 25-250 kHz on marine sediment samples collected from the Bohai Sea and the Yellow Sea in laboratory, together with the geotechnical parameters of sediments. The results indicate that the sound velocity ranges from 1.232 to 1.721 km/s for the collected sediment samples with a significant dispersion within the series measuring frequency. Poorly sorted sediments are highly dispersive nearly with a positive linear relationship. The porosity shows a better negative logarithmic correlation with the sound velocity compared with other geotechnical parameters. Generally, the sound velocity increases with the increasing of the average particle size, sand content, wet and dry bulk densities, and decreasing of the clay content, and water content. An important point should be demonstrated that the higher correlation can be obtained when the measuring frequency is low within the frequency ranges from 25 to 250 kHz since the inhomogeneity of sediment properties has a more remarkably influence on the laboratory sound velocity measurement at the high frequency.

The universal sound velocity formula for the strongly interacting unitary Fermi gas

Due to the scale invariance, the thermodynamic laws of strongly interacting limit unitary Fermi gas can be similar to those of non-interacting ideal gas. For example, the virial theorem between pressure and energy density of the ideal gas P = 2E/aV is still satisfied by the unitary Fermi gas. This paper analyses the sound velocity of unitary Fermi gases with the quasi-linear approximation. For comparison, the sound velocities for the ideal Boltzmann, Bose and Fermi gas are also given. Quite interestingly, the sound velocity formula for the ideal non-interacting gas is found to be satisfied by the unitary Fermi gas in different temperature regions.

Experimental Investigation of Two-Dimensional Velocity on the 90°Double Bend Pipe Flow Using Ultrasound Technique

An experimental investigation was performed to investigate two-dimensional axial velocity field at downstream of the 90°double bend pipe with and without inlet swirling condition. The main objectives are to find separation region and observe the influence of inlet swirling flow on the velocity fluctuation using ultrasound technique. The experiments were carried out in the pipe at Reynolds number Re = 1 × 104. In case of inlet swirling flow condition, a rotary swirler was used as swirling generator, and the swirl number was setup S = 1. The ultrasonic measurements were taken at four downstream locations of the second bend pipe. Phased Array Ultrasonic Velocity Profiler (Phased Array UVP) technique was applied to obtain the two-dimensional velocity of the fluid and the axial and tangential velocity fluctuation. It was found that the secondary reverse flow became smaller at the downstream from the bend when the inlet condition on the first bend was swirling flow. In addition, inlet swirling condition influenced mainly on the tangential velocity fluctuation, and its maximum turbulence intensity was 40%.

Inversion Method for Sound Velocity Profile of Eddy in Deep Ocean

The modal wave number tomography approach is used to obtain sound speed profile of water column in deep ocean. The approach consists of estimation of the local modal eigenvalues from complex pressure field and use of these data as input to modal perturbative inversion method for obtaining the local sound speed profile. The empirical orthonormal function (EOF) is applied to reduce the parameter search space. The ocean environment used for numerical simulations includes the Munk profile as the unperturbed background speed profile and a weak Gaussian eddy as the sound speed profile perturbation. The results of numerical simulations show the method is capable of monitoring the oceanic interior structure.

Relationships of the internodal distance of biological tissue with its sound velocity and attenuation at high frequency in doublet mechanics

In view of the discrete characteristics of biological tissue, doublet mechanics has demonstrated its advantages in the mathematic description of tissue in terms of high frequency （〉 10 MHz） ultrasound. In this paper, we take human breast biopsies as an example to study the influence of the internodal distance, a microscope parameter in biological tissue in doublet mechanics, on the sound velocity and attenuation by numerical simulation. The internodal distance causes the sound velocity and attenuation in biological tissue to change with the increase of frequency. The magnitude of such a change in pathological tissue is distinctly different from that in normal tissue, which can be used to differentiate pathological tissue from normal tissue and can depict the diseased tissue structure by obtaining the sound and attenuation distribution in the sample at high ultrasound frequency. A comparison of sensitivity between the doublet model and conventional continuum model is made, indicating that this is a new method of characterizing ultrasound tissue and diagnosing diseases.

High-Pressure Sound Velocity of Perovskite-Enstatite and Possible Composition of Earth5s Lower Mantle

The compressional sound velocity vp for enstitate of polycrystalline specimens was measured at pressures from 40 to 140 GPa by using the optical analyzer techniques under shock loading. The dependence of vp (in units of km/s) on Hugoniot pressure p (in units of GPa) can be described by: vp = 3.079 - 0.691 lnp + 0.0941n2p. The vp satisfies Birch's law: vp = 6.213 + 1.212 ρ, where ρ is corresponding density, indicating that enstatite is stable throughout the conditions of the lower mantle. Here P wave velocity is 0.5% lower and S wave velocity is 2% higher than those of preliminary reference earth model, respectively. It is concluded that the lower mantle is mainly composed of perovskite-(Mg1-x,Fex)SiO3 and only small amount of (Mg1-x,Fex)O is allowed in it.

Relationship between in situ sound velocity and granular characteristics of seafloor sediments in the Qingdao offshore region

The sound velocity of seafloor sediments from shallow seas can provide important information for harbor design, and ocean and seacoast engineering projects. In this study, in situ measurements were used to obtain accurate sediment sound velocities at 45 stations offshore of Qingdao. The relationships between the sound velocity and granular properties of the seafloor sediments were analyzed. Sound velocity showed an increase with the sand content, sand-clay ratio, and sorting coefficient; and a nonlinear decreasing trend with increasing mean grain size and clay content. We plotted a sound velocity distribution map, which shows that the sound velocity was closely related to the geological environment. Previous empirical equations suggested by Hamilton, Anderson, and Liu were used to calculate the velocity with grain size. A comparison between the measured and calculated velocities indicates that the empirical equations have territorial limitations, and extensive data are essential to establish global empirical equations. Future work includes the calibration of the laboratory acoustic measurements with an in situ technique.

Pressure calibration and sound velocity measurement to 12 GPa in multi-anvil apparatus

We performed the pressure calibration to 12 GPa for 14/6 type(octahedron edge length/WC truncated edge length,in mm) cell assembly in DS 6 × 1400 multi-anvil apparatus by using the phase transitions in Bi(Ⅰ-Ⅱ2.55 GPa,Ⅲ-Ⅴ 7.67 GPa) and ZnTe(LPP-HPP Ⅰ 9.6 GPa,HPP Ⅰ-Ⅱ 12.0 GPa).As verification and application,sound velocity measurements on poly crystalline Al_(2)O_(3) to 12 GPa at room temperature were conducted and the ultrasonic result is in good agreement with previous reports.It demonstrates the feasibility of performing sound velocity measurements close to the mantle transition zone pressure condition in our laboratory.

Influences of Medium Structure of Three-Phase Seabed Deposit on Sound Velocity

Based on the former research, the mechanism of the influence of the medium structure on the sound velocity of the three-phase seabed deposit is discussed by theoretical method. Through analysis of several structure models of three-phase seabed deposit, an equation of sound velocity is presented, which can describe the effect of structure of three-phase deposit on its acoustic velocity. Seen form the derived equation, the equations of the sound velocity of the deposits with different medium structures are different, the influence of the medium structure on the sound velocity is apparent. The equation in the paper provides the theoretical basis to understand the mechanics properties through sound velocity test, and it can be easily adopted in engineering. The influences of the parameters of deposits, void ratio, gas concentration and modulus on sound velocity through the deposit are investigated by numerical analysis of the acoustic velocity. Numerical result shows that the sound velocity of three-phase medium is affected by void ratio, gas concentration and body modulus, and the sound velocity generally increases with the gas concentration increasing. The results of the paper can be helpful to the acoustic method.

Ultrasonic Resonator Techniques for Broad-band Spectroscopy and for High-resolution Sound Velocity Measurement of Liquids

This review gives a short introduction into the principles of ultrasonic measurement techniques for liquids, using cavity resonators. Guidelines for the resonator design in broad-band ultrasonic stxctroscopy as well as in high-resolution single-frequncy or narrowband applications are presented. Deviations of the field configuration in real cells frtxn that in an ideal resonator are discussed and relations for the mode spectrum of cavity fields are given. Recent resonator measurement procedures and methods of data evaluation are mentioned briefly. Some examples of measurements show the extended usability of ultrasonic resonator techniques in basic science and in a wide range of applications for rrkaterials characterization, in manufacturing processes, as well as in control routines.

Vertical Sound Velocity Transition in the Coral Reef Core and its Significance of Indicating Facies

On the basis of the sound velocity measurements of the coral reef core from Nanyong No. 1 Well of Yongshu Reef in the Nansha Islands, the paper studies the relations between the vertical sound velocity transition features in the coral reef core and the corresponding stratigraphic depositional facies change as well as stratigraphic gap of erosion, analyses the cause of the sound velocity transition, expounds the concrete process of the sea level change resulting in the stratigraphic gap of erosion and facies change in the coral reef and explains the relations between the vertical sound velocity transition in the coral reef core and the corresponding stratigraphic paleoclimate and the sea level change. This study is of important practical value and theoretical significance to the island and reef engineering construction and the acoustic logging for oil exploration in the reef limestone area as well as the paleoceanographic study of the marginal sea in the western Pacific Ocean.

Sound Velocity in Soap Foams

The velocity of sound in soap foams at high gas volume fractions is experimentally studied by using the time difference method.It is found that the sound velocities increase with increasing bubble diameter,and asymptotically approach to the value in air when the diameter is larger than 12.5 mm.We propose a simple theoretical model for the sound propagation in a disordered foam.In this model,the attenuation of a sound wave due to the scattering of the bubble wall is equivalently described as the effect of an additional length.This simplicity reasonably reproduces the sound velocity in foams and the predicted results are in good agreement with the experiments.Further measurements indicate that the increase of frequency markedly slows down the sound velocity,whereas the latter does not display a strong dependence on the solution concentration.