A two-stage frequency-domain blind source separation method for underdetermined instantaneous mixtures

In order to decrease the probability of missing some data points or noises being added in the inverse truncated mixing matrix （ITMM） algorithm, a two-stage frequency- domain method is proposed for blind source separation of underdetermined instantaneous mixtures. The separation process is decomposed into two steps of ITMM and matrix completion in the view that there are many soft-sparse （not very sparse） sources. First, the mixing matrix is estimated and the sources are recovered by the traditional ITMM algorithm in the frequency domain. Then, in order to retrieve the missing data and remove noises, the matrix completion technique is applied to each preliminary estimated source by the traditional ITMM algorithm in the frequency domain. Simulations show that, compared with the traditional ITMM algorithms, the proposed two-stage algorithm has better separation performances. In addition, the time consumption problem is considered. The proposed algorithm outperforms the traditional ITMM algorithm at a cost of no more than one- fourth extra time consumption.

Source Separation of Diesel Engine Vibration Based on the Empirical Mode Decomposition and Independent Component Analysis

Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its components in the case of multichannel measurements,such as independent component analysis（ICA）.However,the source separation of vibration signal from single-channel is impossible.In order to study the source separation from single-channel signal for the purpose of source extraction,the combination method of empirical mode decomposition（EMD） and ICA is proposed in diesel engine signal processing.The performance of the described methods of EMD-wavelet and EMD-ICA in vibration signal application is compared,and the results show that EMD-ICA method outperforms the other,and overcomes the drawback of ICA in the case of single-channel measurement.The independent source signal components can be separated and identified effectively from one-channel measurement by EMD-ICA.Hence,EMD-ICA improves the extraction and identification abilities of source signals from diesel engine vibration measurements.

RESEARCH OF QUANTUM GENETIC ALGORITH AND ITS APPLICATION IN BLIND SOURCE SEPARATION

This letter proposes two algorithms: a novel Quantum Genetic Algorithm (QGA)based on the improvement of Han's Genetic Quantum Algorithm (GQA) and a new Blind Source Separation (BSS) method based on QGA and Independent Component Analysis (ICA). The simulation result shows that the efficiency of the new BSS method is obviously higher than that of the Conventional Genetic Algorithm (CGA).

Blind source separation by weighted K-means clustering

Blind separation of sparse sources （BSSS） is discussed. The BSSS method based on the conventional K-means clustering is very fast and is also easy to implement. However, the accuracy of this method is generally not satisfactory. The contribution of the vector x（t） with different modules is theoretically proved to be unequal, and a weighted K-means clustering method is proposed on this grounds. The proposed algorithm is not only as fast as the conventional K-means clustering method, but can also achieve considerably accurate results, which is demonstrated by numerical experiments.

FREQUENCY OVERLAPPED SIGNAL IDENTIFICATION USING BLIND SOURCE SEPARATION

The concepts, principles and usages of principal component analysis （PCA） and independent component analysis （ICA） are interpreted. Then the algorithm and methodology of ICA-based blind source separation （BSS）, in which the pre-whitened based on PCA for observed signals is used, are researched. Aiming at the mixture signals, whose frequency components are overlapped by each other, a simulation of BSS to separate this type of mixture signals by using theory and approach of BSS has been done. The result shows that the BSS has some advantages what the traditional methodology of frequency analysis has not.

Neutron-gamma discrimination method based on blind source separation and machine learning

The discrimination of neutrons from gamma rays in a mixed radiation field is crucial in neutron detection tasks.Several approaches have been proposed to enhance the performance and accuracy of neutron-gamma discrimination.However,their performances are often associated with certain factors,such as experimental requirements and resulting mixed signals.The main purpose of this study is to achieve fast and accurate neutron-gamma discrimination without a priori information on the signal to be analyzed,as well as the experimental setup.Here,a novel method is proposed based on two concepts.The first method exploits the power of nonnegative tensor factorization(NTF)as a blind source separation method to extract the original components from the mixture signals recorded at the output of the stilbene scintillator detector.The second one is based on the principles of support vector machine(SVM)to identify and discriminate these components.In addition to these two main methods,we adopted the Mexican-hat function as a continuous wavelet transform to characterize the components extracted using the NTF model.The resulting scalograms are processed as colored images,which are segmented into two distinct classes using the Otsu thresholding method to extract the features of interest of the neutrons and gamma-ray components from the background noise.We subsequently used principal component analysis to select the most significant of these features wich are used in the training and testing datasets for SVM.Bias-variance analysis is used to optimize the SVM model by finding the optimal level of model complexity with the highest possible generalization performance.In this framework,the obtained results have verified a suitable bias–variance trade-off value.We achieved an operational SVM prediction model for neutron-gamma classification with a high true-positive rate.The accuracy and performance of the SVM based on the NTF was evaluated and validated by comparing it to the charge comparison method via figure of merit.The results indicate that the proposed approach has a superior discrimination quality(figure of merit of 2.20).

Source Recovery in Underdetermined Blind Source Separation Based on Artificial Neural Network

We propose a novel source recovery algorithm for underdetermined blind source separation, which can result in better accuracy and lower computational cost. On the basis of the model of underdetermined blind source separation, the artificial neural network with single-layer perceptron is introduced into the proposed algorithm. Source signals are regarded as the weight vector of single-layer perceptron, and approximate ι~0-norm is taken into account for output error decision rule of the perceptron, which leads to the sparse recovery. Then the procedure of source recovery is adjusting the weight vector of the perceptron. What's more, the optimal learning factor is calculated and a descent sequence of smoothed parameter is used during iteration, which improves the performance and significantly decreases computational complexity of the proposed algorithm. The simulation results reveal that the algorithm proposed can recover the source signal with high precision, while it requires lower computational cost.

The Velocity Measurement of Two-phase Flow Based on Particle Swarm Optimization Algorithm and Nonlinear Blind Source Separation

In order to overcome the disturbance of noise,this paper presented a method to measure two-phase flow velocity using particle swarm optimization algorithm,nonlinear blind source separation and cross correlation method.Because of the nonlinear relationship between the output signals of capacitance sensors and fluid in pipeline,nonlinear blind source separation is applied.In nonlinear blind source separation,the odd polynomials of higher order are used to fit the nonlinear transformation function,and the mutual information of separation signals is used as the evaluation function.Then the parameters of polynomial and linear separation matrix can be estimated by mutual information of separation signals and particle swarm optimization algorithm,thus the source signals can be separated from the mixed signals.The two-phase flow signals with noise which are obtained from upstream and downstream sensors are respectively processed by nonlinear blind source separation method so that the noise can be effectively removed.Therefore,based on these noise-suppressed signals,the distinct curves of cross correlation function and the transit times are obtained,and then the velocities of two-phase flow can be accurately calculated.Finally,the simulation experimental results are given.The results have proved that this method can meet the measurement requirements of two-phase flow velocity.

Online blind source separation based on joint diagonalization

A new algorithm is proposed for joint diagonalization. With a modified objective function, the new algorithm not only excludes trivial and unbalanced solutions successfully, but is also easily optimized. In addition, with the new objective function, the proposed algorithm can work well in online blind source separation （BSS） for the first time, although this family of algorithms is always thought to be valid only in batch-mode BSS by far. Simulations show that it is a very competitive joint diagonalization algorithm.

Blind source separation of ship-radiated noise based on generalized Gaussian model

When the distribution of the sources cannot be estimated accurately, the ICA algorithms failed to separate the mixtures blindly. The generalized Gaussian model （GGM） is presented in ICA algorithm since it can model non- Ganssian statistical structure of different source signals easily. By inferring only one parameter, a wide class of statistical distributions can be characterized. By using maximum likelihood （ML） approach and natural gradient descent, the learning rules of blind source separation （BSS） based on GGM are presented. The experiment of the ship-radiated noise demonstrates that the GGM can model the distributions of the ship-radiated noise and sea noise efficiently, and the learning rules based on GGM gives more successful separation results after comparing it with several conventional methods such as high order cumnlants and Gaussian mixture density function.

Blind source separation based on generalized gaussian model

Since in most blind source separation(BSS)algorithms the estimations of probability density function(pdf)of sources are fixed or can only switch between one sup-Gaussian and other sub-Gaussian model,they may not be efficient to separate sources with different distributions.So to solve the problem of pdf mismatch and the separation of hybrid mixture in BSS,the generalized Gaussian model(GGM)is introduced to model the pdf of the sources since it can provide a general structure of univariate distributions.Its great advantage is that only one parameter needs to be determined in modeling the pdf of different sources,so it is less complex than Gaussian mixture model.By using maximum likelihood(ML)approach,the convergence of the proposed algorithm is improved.The computer simulations show that it is more efficient and valid than conventional methods with fixed pdf estimation.

Single channel blind source separation based on ICA feature extraction

A new technique is proposed to solve the blind source separation (BSS) given only a single channel observation. The basis functions and the density of the coefficients of source signals learned by ICA are used as the prior knowledge. Based on the learned prior information the learning rules of single channel BSS are presented by maximizing the joint log likelihood of the mixed sources to obtain source signals from single observation, in which the posterior density of the given measurements is maximized. The experimental results exhibit a successful separation performance for mixtures of speech and music signals.

Blind Source Separation based on Time-Frequency Morphological Characteristics for Rigid Acoustic Scattering by Underwater Objects

Separation of the components of rigid acoustic scattering by underwater objects is essential in obtaining the structural characteristics of such objects. To overcome the problem of rigid structures appearing to have the same spectral structure in the time domain, time-frequency Blind Source Separation （BSS） can be used in combination with image morphology to separate the rigid scattering components of different objects. Based on a highlight model, the separation of the rigid scattering structure of objects with time-frequency distribution is deduced. Using a morphological filter, different characteristics in a Wigner-Ville Distribution （WVD） observed for single auto term and cross terms can be simplified to remove any cross-term interference. By selecting time and frequency points of the auto terms signal, the accuracy of BSS can be improved. A simulation experimental has been used to analyze the feasibility of the new method, with changing the pulse width of the transmitted signal, the relative amplitude and the time delay parameter. And simulation results show that the new method can not only separate rigid scattering components, but can also separate the components when elastic scattering and rigid scattering exist at the same time. Experimental results confirm that the new method can be used in separating the rigid scattering structure of underwater objects.

Blind source separation of multichannel electroencephalogram based on wavelet transform and ICA

Combination of the wavelet transform and independent component analysis （ICA） was employed for blind source separation （BSS） of multichannel electroencephalogram （EEG）. After denoising the original signals by discrete wavelet transform, high frequency components of some noises and artifacts were removed from the original signals. The denoised signals were reconstructed again for the purpose of ICA, such that the drawback that ICA cannot distinguish noises from source signals can be overcome effectively. The practical processing results showed that this method is an effective way to BSS of multichannel EEG. The method is actually a combination of wavelet transform with adaptive neural network, so it is also useful for BBS of other complex signals.

Learning a discriminative high-fidelity dictionary for single channel source separation

Sparse-representation-based single-channel source separation,which aims to recover each source’s signal using its corresponding sub-dictionary,has attracted many scholars’attention.The basic premise of this model is that each sub-dictionary possesses discriminative information about its corresponding source,and this information can be used to recover almost every sample from that source.However,in a more general sense,the samples from a source are composed not only of discriminative information but also common information shared with other sources.This paper proposes learning a discriminative high-fidelity dictionary to improve the separation performance.The innovations are threefold.Firstly,an extra sub-dictionary was combined into a conventional union dictionary to ensure that the source-specific sub-dictionaries can capture only the purely discriminative information for their corresponding sources because the common information is collected in the additional sub-dictionary.Secondly,a task-driven learning algorithm is designed to optimize the new union dictionary and a set of weights that indicate how much of the common information should be allocated to each source.Thirdly,a source separation scheme based on the learned dictionary is presented.Experimental results on a human speech dataset yield evidence that our algorithm can achieve better separation performance than either state-of-the-art or traditional algorithms.

Algorithm for source recovery in underdetermined blind source separation based on plane pursuit

In order to achieve accurate recovery signals under the underdetermined circumstance in a comparatively short time,an algorithm based on plane pursuit(PP) is proposed. The proposed algorithm selects the atoms according to the correlation between received signals and hyper planes, which are composed by column vectors of the mixing matrix, and uses these atoms to recover source signals. Simulation results demonstrate that the PP algorithm has low complexity and higher accuracy as compared with basic pursuit(BP), orthogonal matching pursuit(OMP), and adaptive sparsity matching pursuit(ASMP) algorithms.

New Wavelet Threshold Denoising Method in Noisy Blind Source Separation

In general conditions, most blind source separation algorithms are established on noisy-free model and ignore the noise that affects the quality of separated sources. Firstly, this paper introduces an improved natural gradient algorithm based on bias removal technology to estimate the demixing matrix under noisy environment. Then the discrete wavelet transform technology is applied to the separated signals to further remove noise. In order to improve the separation effect, this paper analyzes the deficiency of hard threshold and soft threshold, and proposes a new wavelet threshold function based on the wavelet decomposition and reconfiguration. The simulations have verified that this method improves the signal noise ratio （SNR） of the separation results and the separation precision.

On-line blind source separation algorithm based on second order statistics

An on-line blind source separation （BSS） algorithm is presented in this paper under the assumption that sources are temporarily correlated signals. By using only some of the observed samples in a recursive calculation, the whitening matrix and the rotation matrix could be approximately obtained through the measurement of only one cost function. SimNations show goad performance of the algorithm.

A WEIGHTED GENERAL DISCRETE FOURIER TRANSFORM FOR THE FREQUENCY-DOMAIN BLIND SOURCE SEPARATION OF CONVOLUTIVE MIXTURES

This letter deals with the frequency domain Blind Source Separation of Convolutive Mixtures (CMBSS). From the frequency representation of the "overlap and save", a Weighted General Discrete Fourier Transform (WGDFT) is derived to replace the traditional Discrete Fourier Transform (DFT). The mixing matrix on each frequency bin could be estimated more precisely from WGDFT coefficients than from DFT coefficients, which improves separation performance. Simulation results verify the validity of WGDFT for frequency domain blind source separation of convolutive mixtures.

The Research of Blind Source Separation (BSS) in Machinery Fault Diagnosis

Blind source separation (BSS) technology is very useful in many fields, such as communication, radar and so on. Because of the advantage of BSS that it can separate multi-sources even not knowing the mix-coefficient and the probability distribution, it can also be used in fault diagnosis. In this paper, we first use the BSS to deal with the sound from the machinery in fault diagnosis. We make a simulation of two sound sources and four sensors to test the result. Each source is a narrow-band source, which is composed of several sine waves. The result shows that the two sources can be well separated from the mixed signals. So we can draw a conclusion that BSS can improve the technology of sound fault diagnosis, especially in rotating machinery.