Nowadays, chemical safety has attracted considerable attention, and chemical gas leakage monitoring and source term estimation(STE) have become hot spots. However, few studies have focused on sensor layouts in scenari...Nowadays, chemical safety has attracted considerable attention, and chemical gas leakage monitoring and source term estimation(STE) have become hot spots. However, few studies have focused on sensor layouts in scenarios with multiple potential leakage sources and wind conditions, and studies on the risk information(RI) detection and prioritization order of sensors have not been performed. In this work, the monitoring area of a chemical factory is divided into multiple rectangles with a uniform mesh. The RI value of each grid node is calculated on the basis of the occurrence probability and normalized concentrations of each leakage scenario. A high RI value indicates that a sensor at a grid node has a high chance of detecting gas concentrations in different leakage scenarios. This situation is beneficial for leakage monitoring and STE. The methods of similarity redundancy detection and the maximization of sensor RI detection are applied to determine the sequence of sensor locations. This study reveals that the RI detection of the optimal sensor layout with eight sensors exceeds that of the typical layout with 12 sensors. In addition, STE with the optimized placement sequence of the sensor layout is numerically simulated. The statistical results of each scenario with various numbers of sensors reveal that STE is affected by sensor number and scenarios(leakage locations and winds). In most scenarios, appropriate STE results can be retained under the optimal sensor layout even with four sensors. Eight or more sensors are advised to improve the performance of STE in all scenarios. Moreover, the reliability of the STE results in each scenario can be known in advance with a specific number of sensors. Such information thus provides a reference for emergency rescue.展开更多
A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay ...A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay arrivals of surface-bottom reflection and bottom-surface reflection intersect at the source depth. Two hydrophones deployed vertically with a certain interval are required at least. If the receiver depths are known, the pair of time delays can be used to estimate the source depth. With the proposed method the source depth can be estimated successfully in a moderate range in the deep ocean without complicated matched-field calculations in the simulations and experiments.展开更多
In order to estimate the number of coherent sources, a Hankel matrix with the size of half the number of the received arrays is constructed using snapshot data of observed vectors. And the rank of the Hankel matrix is...In order to estimate the number of coherent sources, a Hankel matrix with the size of half the number of the received arrays is constructed using snapshot data of observed vectors. And the rank of the Hankel matrix is only related with the number of signal sources, no matter the signals are uncorrelated or coherent. We can get the signal and noise eigenvalues by conducting the singular value decomposition (SVD) to the Hankel matrix, the source number can be obtained by calculating the maximum ratio of each eigenvalue pair. The complexity of the algorithm is reduced greatly as only part of the observed data (single snapshot) is used. The Monte-Carlo simulation results demonstrate the feasibility of the algorithm.展开更多
An approach of source range estimation in an ocean environment with sloping bottom is presented. The approach is based on pulse waveform correlation matching between the received and simulated signals. An acoustic pro...An approach of source range estimation in an ocean environment with sloping bottom is presented. The approach is based on pulse waveform correlation matching between the received and simulated signals. An acoustic prop- agation experiment is carried out in a slope environment. The pulse signal is received by the vertical line array, and the depth structure can be obtained. For the experimental data, the depth structures of pulse waveforms are different, which depends on the source range. For a source with unknown range, the depth structure of pulse waveform can be first obtained from the experimental data. Next, the depth structures of pulse waveforms in dif- ferent ranges are numerically calculated. After the process of correlating the experimental and simulated signals, the range corresponding to the maximum value of the correlation coefficient is the estimated source range. For the explosive sources in the experiment with two depths, the mean relative errors of range estimation are both less than 7%.展开更多
This paper focuses on the high intensity filaments (dye patches) embedded in dye plumes in a wall-bounded shear flow, to investigate the shear effect on the dye patch distribution. Motivated by the widely concerned in...This paper focuses on the high intensity filaments (dye patches) embedded in dye plumes in a wall-bounded shear flow, to investigate the shear effect on the dye patch distribution. Motivated by the widely concerned inverse estimation of the source location, we try extracting useful information to know the source location from down-stream dye patches. Accordingly, we changed the dye injection location at different distances from the wall and made observations at different downstream (diffusion) distances from the source. The orientation angle and roundness of dye patches were concerned to examine the shear effect and dye patch characteristics. To capture the dye plume images, a planar laser induced fluorescence (PLIF) technique was used. The orientation and roundness of each dye patch were calculated by least-square fitting. The statistics of both the orientation angle and the roundness were compared with those in homogeneous turbulent cases to reveal the shear effect. Different from uniformly-orientated dye patches in the homogeneous flow, larger occurrence probabilities with positive orientation angles of dye patches are observed in wall-bounded shear flow, in particular, when the injection location is near the wall. As with information extraction for the inverse estimation of source location, it is found that the orientation distribution of dye patches is independent of the diffusion distance, but related with the injection location from the wall. While for the homogeneous flow cases, a strong dependence on the diffusion distance is observed in the orientation distribution profiles. As for the roundness, similar aspects are found regarding the dependencies on the injection location in shear flow and on diffusion distance in homogeneous flow.展开更多
The inverse estimation of a source location of pollutant released into a turbulent flow is a probability problem instead of a deterministic one, as the turbulent flow is chaotic and irreversible. However, researches c...The inverse estimation of a source location of pollutant released into a turbulent flow is a probability problem instead of a deterministic one, as the turbulent flow is chaotic and irreversible. However, researches can be conducted to provide helpful instructions to the possible source location with corresponding uncertainty. This study aims to propose a method of inverse estimation of a passive-scalar source location. Experimental investigation of the dye plume characteristics released into a fully-developed turbulent flow is performed in a water channel. A planar laser-induced fluorescence (PLIF) technique is used to obtain two-dimensional images of spreading dye plumes at a bulk Reynolds number of 20,000. The distributions of high concentration areas in the PLIF images are chosen as features that characterize the traveling (diffusion) distance or time from the dye source. Graphical analysis is used to extract these high concentration areas. The procedure of graphical analysis has three steps: 1) binarization using a threshold to extract high concentration dye patches;2) labeling individual high-concentration dye patches in the binarized images;and 3) pixel-counting to measure the area and perimeter of each dye patch. We examine the variations of fractal dimension of patches, and the fractal dimension is observed to be almost constant irrespective of the distance from the source. The kurtosis of the probability density function curve of the logarithm dimensionless dye patch areas is found to be related with the downstream diffusion distance, based on which an inverse estimation method to locate a passive-scalar point source is proposed and evaluated.展开更多
A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power al...A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power along some simple paths on the surfaces such as rectangle, disc and hemisphere is analyzed. It is argued that the accuracy of estimating sound power is strongly depended on a suitable selection of scan path. The accurate estdriation of sound power can be made by scanning along some simple paths.展开更多
Underwater target localization and parameters(azimuth and range) estimation by the method of utilizing explosions as underwater sound sources are described in this paper.The narrow beam reverberation model of the targ...Underwater target localization and parameters(azimuth and range) estimation by the method of utilizing explosions as underwater sound sources are described in this paper.The narrow beam reverberation model of the target echo signal is researched to estimate the target azimuth in reverberation background.Estimation errors of target azimuth and range are studied and proved to approximately meet Gauss distribution.Then the variance formula of target range error is deduced.Simulation experiments are applied to research the target range error and its standard deviation,and a series of measures to improve the estimation accuracy of target range are proposed.It is confirmed by the data processing results of simulations and lake experiments that the proposed method can accurately locate underwater target at a long distance on the condition of a certain underwater explosion range error.展开更多
Abrupt air pollution accidents can endanger people’s health and destroy the local ecological environment.The appropriate emergency response can minimize the harmful effects of accidents and protect people’s lives an...Abrupt air pollution accidents can endanger people’s health and destroy the local ecological environment.The appropriate emergency response can minimize the harmful effects of accidents and protect people’s lives and property.This paper provides an overview of the key emergency response technologies for abrupt air pollution accidents around the globe with emphasis on the major achievements that China has obtained in recent years.With decades of effort,China has made significant progress in emergency monitoring technologies and equipment,source estimation technologies,pollutant dispersion simulation technologies and others.Many effective domestic emergency monitoring instruments(e.g.,portable DOAS/FT-IR systems,portable FID/PID systems,portable GC-MS systems,scanning imaging remote sensing systems,and emergency monitoring vehicles)had been developed which can meet the demands for routine emergency response activities.A monitoring layout technique combining air dispersion simulation,fuzzy comprehensive evaluation,and a post-optimality analysis was proposed to identify the optimal monitoring layout scheme under the constraints of limited monitoring resources.Multiple source estimation technologies,including the forward method and the inversion method,have been established and evaluated under various scenarios.Multi-scale dynamic pollution dispersion simulation systems with high temporal and spatial resolution were further developed.A comprehensive emergency response platform integrating database support,source estimation,monitoring schemes,fast monitoring of pollutants,pollution predictions and risk assessment was developed based on the technical idea of"source identification-model simulation-environmental monitoring"dynamic interactive feedback.It is expected that the emergency response capability for abrupt air pollution accidents will gradually improve in China.展开更多
An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transf...An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transform. For an ideal waveguide, there are invariable frequency features both in the frequency spectrum of the warped signal corresponding to modal cut-off frequencies and the warped signal autocorrelation function due to modal interference. These intrinsic frequency features can be used to passive source ranging. So, the approximate rela- tionship between the frequency of warped signal at an unknown source range and the intrinsic frequency extracted by the time warping transform is derived. These rules can be generalized to an actual shallow water waveguide. Employing an acoustic model to offer the invariable frequency spectrum features, the impulsive signal data collected by a single hydrophone in the North Yellow Sea in December 2011 are analyzed to verify the proposed source ranging ap- proach. The estimated ranges are in good agreement with the ranges measured by GPS, and the mean relative error of range estimation is less than 10%.展开更多
A uniform array of scalar-sensors with intersensor spacings over a large aperture size generally offers enhanced resolution and source localization accuracy,but it may also lead to cyclic ambiguity.By exploiting the p...A uniform array of scalar-sensors with intersensor spacings over a large aperture size generally offers enhanced resolution and source localization accuracy,but it may also lead to cyclic ambiguity.By exploiting the polarization information of impinging waves,an electromagnetic vector-sensor array outperforms the unpolarized scalar-sensor array in resolving this cyclic ambiguity.However,the electromagnetic vector-sensor array usually consists of cocentered orthogonal loops and dipoles(COLD),which is easily subjected to mutual coupling across these cocentered dipoles/loops.As a result,the source localization performance of the COLD array may substantially degrade rather than being improved.This paper proposes a new source localization method with a non-cocentered orthogonal loop and dipole(NCOLD)array.The NCOLD array contains only one dipole or loop on each array grid,and the intersensor spacings are larger than a half-wavelength.Therefore,unlike the COLD array,these well separated dipoles/loops minimize the mutual coupling effects and extend the spatial aperture as well.With the NCOLD array,the proposed method can effciently exploit the polarization information to offer high localization precision.展开更多
基金supported by National Natural Science Foundation of China (61988101)National Natural Science Fund for Distinguished Young Scholars (61725301)Fundamental Research Funds for the Central Universities。
文摘Nowadays, chemical safety has attracted considerable attention, and chemical gas leakage monitoring and source term estimation(STE) have become hot spots. However, few studies have focused on sensor layouts in scenarios with multiple potential leakage sources and wind conditions, and studies on the risk information(RI) detection and prioritization order of sensors have not been performed. In this work, the monitoring area of a chemical factory is divided into multiple rectangles with a uniform mesh. The RI value of each grid node is calculated on the basis of the occurrence probability and normalized concentrations of each leakage scenario. A high RI value indicates that a sensor at a grid node has a high chance of detecting gas concentrations in different leakage scenarios. This situation is beneficial for leakage monitoring and STE. The methods of similarity redundancy detection and the maximization of sensor RI detection are applied to determine the sequence of sensor locations. This study reveals that the RI detection of the optimal sensor layout with eight sensors exceeds that of the typical layout with 12 sensors. In addition, STE with the optimized placement sequence of the sensor layout is numerically simulated. The statistical results of each scenario with various numbers of sensors reveal that STE is affected by sensor number and scenarios(leakage locations and winds). In most scenarios, appropriate STE results can be retained under the optimal sensor layout even with four sensors. Eight or more sensors are advised to improve the performance of STE in all scenarios. Moreover, the reliability of the STE results in each scenario can be known in advance with a specific number of sensors. Such information thus provides a reference for emergency rescue.
基金Supported by the National Natural Science Foundation of China under Grant No 11174235
文摘A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay arrivals of surface-bottom reflection and bottom-surface reflection intersect at the source depth. Two hydrophones deployed vertically with a certain interval are required at least. If the receiver depths are known, the pair of time delays can be used to estimate the source depth. With the proposed method the source depth can be estimated successfully in a moderate range in the deep ocean without complicated matched-field calculations in the simulations and experiments.
基金Project supported by the Research and Innovation Project of Education Commission of Shanghai Municipality (Grant No.11YZ14)the Science and Technology Commission of Shanghai Municipality (Grant No.08DZ2231100)the Shanghai Leading Academic Discipline Project (Grant No.S30108)
文摘In order to estimate the number of coherent sources, a Hankel matrix with the size of half the number of the received arrays is constructed using snapshot data of observed vectors. And the rank of the Hankel matrix is only related with the number of signal sources, no matter the signals are uncorrelated or coherent. We can get the signal and noise eigenvalues by conducting the singular value decomposition (SVD) to the Hankel matrix, the source number can be obtained by calculating the maximum ratio of each eigenvalue pair. The complexity of the algorithm is reduced greatly as only part of the observed data (single snapshot) is used. The Monte-Carlo simulation results demonstrate the feasibility of the algorithm.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11434012 and 41561144006
文摘An approach of source range estimation in an ocean environment with sloping bottom is presented. The approach is based on pulse waveform correlation matching between the received and simulated signals. An acoustic prop- agation experiment is carried out in a slope environment. The pulse signal is received by the vertical line array, and the depth structure can be obtained. For the experimental data, the depth structures of pulse waveforms are different, which depends on the source range. For a source with unknown range, the depth structure of pulse waveform can be first obtained from the experimental data. Next, the depth structures of pulse waveforms in dif- ferent ranges are numerically calculated. After the process of correlating the experimental and simulated signals, the range corresponding to the maximum value of the correlation coefficient is the estimated source range. For the explosive sources in the experiment with two depths, the mean relative errors of range estimation are both less than 7%.
文摘This paper focuses on the high intensity filaments (dye patches) embedded in dye plumes in a wall-bounded shear flow, to investigate the shear effect on the dye patch distribution. Motivated by the widely concerned inverse estimation of the source location, we try extracting useful information to know the source location from down-stream dye patches. Accordingly, we changed the dye injection location at different distances from the wall and made observations at different downstream (diffusion) distances from the source. The orientation angle and roundness of dye patches were concerned to examine the shear effect and dye patch characteristics. To capture the dye plume images, a planar laser induced fluorescence (PLIF) technique was used. The orientation and roundness of each dye patch were calculated by least-square fitting. The statistics of both the orientation angle and the roundness were compared with those in homogeneous turbulent cases to reveal the shear effect. Different from uniformly-orientated dye patches in the homogeneous flow, larger occurrence probabilities with positive orientation angles of dye patches are observed in wall-bounded shear flow, in particular, when the injection location is near the wall. As with information extraction for the inverse estimation of source location, it is found that the orientation distribution of dye patches is independent of the diffusion distance, but related with the injection location from the wall. While for the homogeneous flow cases, a strong dependence on the diffusion distance is observed in the orientation distribution profiles. As for the roundness, similar aspects are found regarding the dependencies on the injection location in shear flow and on diffusion distance in homogeneous flow.
文摘The inverse estimation of a source location of pollutant released into a turbulent flow is a probability problem instead of a deterministic one, as the turbulent flow is chaotic and irreversible. However, researches can be conducted to provide helpful instructions to the possible source location with corresponding uncertainty. This study aims to propose a method of inverse estimation of a passive-scalar source location. Experimental investigation of the dye plume characteristics released into a fully-developed turbulent flow is performed in a water channel. A planar laser-induced fluorescence (PLIF) technique is used to obtain two-dimensional images of spreading dye plumes at a bulk Reynolds number of 20,000. The distributions of high concentration areas in the PLIF images are chosen as features that characterize the traveling (diffusion) distance or time from the dye source. Graphical analysis is used to extract these high concentration areas. The procedure of graphical analysis has three steps: 1) binarization using a threshold to extract high concentration dye patches;2) labeling individual high-concentration dye patches in the binarized images;and 3) pixel-counting to measure the area and perimeter of each dye patch. We examine the variations of fractal dimension of patches, and the fractal dimension is observed to be almost constant irrespective of the distance from the source. The kurtosis of the probability density function curve of the logarithm dimensionless dye patch areas is found to be related with the downstream diffusion distance, based on which an inverse estimation method to locate a passive-scalar point source is proposed and evaluated.
文摘A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power along some simple paths on the surfaces such as rectangle, disc and hemisphere is analyzed. It is argued that the accuracy of estimating sound power is strongly depended on a suitable selection of scan path. The accurate estdriation of sound power can be made by scanning along some simple paths.
基金supported by the National Natural Science Foundation of China(61431020,61571434)
文摘Underwater target localization and parameters(azimuth and range) estimation by the method of utilizing explosions as underwater sound sources are described in this paper.The narrow beam reverberation model of the target echo signal is researched to estimate the target azimuth in reverberation background.Estimation errors of target azimuth and range are studied and proved to approximately meet Gauss distribution.Then the variance formula of target range error is deduced.Simulation experiments are applied to research the target range error and its standard deviation,and a series of measures to improve the estimation accuracy of target range are proposed.It is confirmed by the data processing results of simulations and lake experiments that the proposed method can accurately locate underwater target at a long distance on the condition of a certain underwater explosion range error.
基金supported by the National Key Research and Development Program of China(No.2017YFC0209900)Beijing Nova Program from Beijing Municipal Science&Technology Commission(No.Z201100006820098)the Youth Science and Technology Talents Support Program(2020)by Anhui Association for Science and Technology(No.RCTJ202002)。
文摘Abrupt air pollution accidents can endanger people’s health and destroy the local ecological environment.The appropriate emergency response can minimize the harmful effects of accidents and protect people’s lives and property.This paper provides an overview of the key emergency response technologies for abrupt air pollution accidents around the globe with emphasis on the major achievements that China has obtained in recent years.With decades of effort,China has made significant progress in emergency monitoring technologies and equipment,source estimation technologies,pollutant dispersion simulation technologies and others.Many effective domestic emergency monitoring instruments(e.g.,portable DOAS/FT-IR systems,portable FID/PID systems,portable GC-MS systems,scanning imaging remote sensing systems,and emergency monitoring vehicles)had been developed which can meet the demands for routine emergency response activities.A monitoring layout technique combining air dispersion simulation,fuzzy comprehensive evaluation,and a post-optimality analysis was proposed to identify the optimal monitoring layout scheme under the constraints of limited monitoring resources.Multiple source estimation technologies,including the forward method and the inversion method,have been established and evaluated under various scenarios.Multi-scale dynamic pollution dispersion simulation systems with high temporal and spatial resolution were further developed.A comprehensive emergency response platform integrating database support,source estimation,monitoring schemes,fast monitoring of pollutants,pollution predictions and risk assessment was developed based on the technical idea of"source identification-model simulation-environmental monitoring"dynamic interactive feedback.It is expected that the emergency response capability for abrupt air pollution accidents will gradually improve in China.
基金supported by the Program of One Hundred Talented People of the Chinese Academy of Sciencesthe National Natural Science Foundation of China(11174312,10974218,11125420)
文摘An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transform. For an ideal waveguide, there are invariable frequency features both in the frequency spectrum of the warped signal corresponding to modal cut-off frequencies and the warped signal autocorrelation function due to modal interference. These intrinsic frequency features can be used to passive source ranging. So, the approximate rela- tionship between the frequency of warped signal at an unknown source range and the intrinsic frequency extracted by the time warping transform is derived. These rules can be generalized to an actual shallow water waveguide. Employing an acoustic model to offer the invariable frequency spectrum features, the impulsive signal data collected by a single hydrophone in the North Yellow Sea in December 2011 are analyzed to verify the proposed source ranging ap- proach. The estimated ranges are in good agreement with the ranges measured by GPS, and the mean relative error of range estimation is less than 10%.
基金supported by the Scientifc Research Fund of Zhejiang Provincial Education Department(No.Y201225848)the Scientifc and Technological Innovation Programs of Higher Education Institutions in Shanxi(No.2013124)
文摘A uniform array of scalar-sensors with intersensor spacings over a large aperture size generally offers enhanced resolution and source localization accuracy,but it may also lead to cyclic ambiguity.By exploiting the polarization information of impinging waves,an electromagnetic vector-sensor array outperforms the unpolarized scalar-sensor array in resolving this cyclic ambiguity.However,the electromagnetic vector-sensor array usually consists of cocentered orthogonal loops and dipoles(COLD),which is easily subjected to mutual coupling across these cocentered dipoles/loops.As a result,the source localization performance of the COLD array may substantially degrade rather than being improved.This paper proposes a new source localization method with a non-cocentered orthogonal loop and dipole(NCOLD)array.The NCOLD array contains only one dipole or loop on each array grid,and the intersensor spacings are larger than a half-wavelength.Therefore,unlike the COLD array,these well separated dipoles/loops minimize the mutual coupling effects and extend the spatial aperture as well.With the NCOLD array,the proposed method can effciently exploit the polarization information to offer high localization precision.