Research on Energy-Saving Performance of Intermittent Heating for Rooms in Hot Summer&ColdWinter Zone

In the hot summer&cold winter zone in China,intermittent heating space for rooms is widely used.However,in comparison with continuous space heating,the energy-saving performance of intermittent space heating has not been sufficiently investigated.This paper studied the factors influencing the energy performance of intermittent heating for the representativeoffice inhot summer&coldwinter zone.Basedon theheatbalancemethod,adynamic thermalmodel of the intermittent heating roomwas built and tested by experiments.And then,it analyzed the total space heating load,the amount of energy saving and energy saving ratio of the intermittent heating under different preheating hours,occupation hours,required roomtemperatures,air change rates,overall heat transfer coefficients(U-value)of windows and wall materials.If the adjacent rooms were not heated,for a typical room occupied about 10 h a day,the energy-saving ratio of intermittent heating was about 30%compared with continuous heating.But the preheating power was higher than two times of continuous heating.The results also indicated that the occupation hours had a significant effect on energy saving amount and ratio,it should be noted that the energy saving ratio by intermittent heating was much lower than the unoccupied period ratio.Relative to other factors,the heating temperatures,room air change rates and U-value of windows,and room envelope materials had little effect on energy efficiency.If the adjacent rooms were heated in the same manner as the roomin question,the energy-saving ratio of the total load of intermittent heating was heavily reduced to 8.46%.

Research on cognitive load evaluation with subjective method in manual assembly

Subjective scales have different kinds of applicability in diverse fields.This study intends to implement a quantitative approach to determine the applicability of subjective scales in manual as-sembly work and evaluate the cognitive load of assembly workers.A multi-scale research paradigm based on subjective evaluation method is proposed.Three typical task stages are extracted from the process of assembly work.The National Aeronautics and Space Administration Task Load Index(NASA-TLX)scale,PAAS scale and Workload Profile Index Ratings(WP)scale are selected for the design of 3×3 multi-factor mixed experiment.The power spectrum density(PSD)characteris-tics of electroencephalogram(EEG)are utilized to identify the difficulty levels of the three task sta-ges.The relevant indicators of scale applicability are assessed.The results show that in terms of sensitivity,NASA-TLX scale reaches the highest sensitivity(F=999.137,P=0<0.05).In terms of validity,NASA-TLX scale possesses the best concurrent validity(P=0.0255<0.05).In terms of diagnosticity,NASA-TLX scale based on 6 dimensions takes on the best diagnostic performance.In terms of subject acceptability,WP scale performs the worst.According to the analytic hierarchy process(AHP)model,the applicability scores of NASA-TLX scale,PAAS scale and WP scale are determined as 3,2.55 and 1.6714,respectively.Therefore,NASA-TLX scale is regarded as the most suitable subjective evaluation questionnaire for assembly workers,which is also an effective quantitative evaluation method for the cognitive load of assembly workers.

Crack spacing threshold of double cracks propagation for large-module rack

Large-module rack of the Three Gorges shiplift is manufactured by casting and machining, which is unable to avoid slag inclusions and surface cracks. To ensure its safety in the future service, studying on crack propagation rule and the residual life estimation method of large-module rack is of great significance. The possible crack distribution forms of the rack in the Three Gorges shiplift were studied. By applying moving load on the model in FRANC3 D and ANSYS, quantitative analyses of interference effects on double cracks in both collinear and offset conditions were conducted. The variation rule of the stress intensity factor(SIF) influence factor, RK, of double collinear cracks changing with crack spacing ratio, RS, was researched. The horizontal and vertical crack spacing threshold of double cracks within the design life of the shiplift were obtained, which are 24 and 4 times as large as half of initial crack length, c0, respectively. The crack growth rates along the length and depth directions in the process of coalescence on double collinear cracks were also studied.

Static loading and vertical displacement at southern Siberia

Seismic method is usually used for elastic parametric estimation. This is why this method presents dynamic parameters of Earth. Frequency seismic range changes greatly from geodynamic modelling time. Now we have opportunity to use geodesy result for some years for elastic parameters estimation. Static solution from elastic theory may be used for the interpretation of long term results. It presents static elastic parameter. The inverse problem for different types of vertical surface loading on one year period is calculated. Two cases of loading with maximal and minimal area are presented. Results are determined by space geodesy and leveling methods. Current relation between atmospheric pressure and vertical displacements was estimated at the center of Siberian Anti Cyclone with size varied from 2000 km to 3000 kin. Pressure-displacement coefficients （PDC） can be achieved by three years obser- vation （0.997 mm/mbar for NVSK GPS station）. It is used for elastic module study of geology medium with maximum thickness up to 600 km. In the context of elastic model, the modulus of rigidity is estimated to be 113 GPa. Vast expanse of anti-cyclone may relate with rheology of crust and upper mantle. Smaller size of surface loading - local loading is seasonal variation of water reservoir. Annual vertical changes were obtained by leveling near the dam of the reservoir. PDC ratio was 1.15 mm/bar for these places. In elastic theory, the Young modulus E = 80 GPa （Poisson ratio = 0.25, the modulus of rigidity - 32 GPa） was calculated by sixteen years of leveling measurements. This result can effectively be represented for upper crust. Our results were checked by solution for coseismic displacement of Chyia- Altai earthquake （Sep. 27, 2003, M = 7.3）. Coseismic results calculated by static modules agree with experimental coseismic GPS data at 10% level.