Effect of sintering temperature on the microstructure and properties of foamed glass-ceramics prepared from high-titanium blast furnace slag and waste glass

Foamed glass-ceramics were prepared via a single-step sintering method using high-titanium blast furnace slag and waste glass as the main raw materials The influence of sintering temperature(900–1060℃) on the microstructure and properties of foamed glass-ceramics was studied. The results show that the crystal shape changed from grainy to rod-shaped and finally turned to multiple shapes as the sintering temperature was increased from 900 to 1060℃. With increasing sintering temperature, the average pore size of the foamed glass-ceramics increased and subsequently decreased. By contrast, the compressive strength and the bulk density decreased and subsequently increased. An excessively high temperature, however, induced the coalescence of pores and decreased the compressive strength. The optimal properties, including the highest compressive strength(16.64 MPa) among the investigated samples and a relatively low bulk density(0.83 g/cm^3), were attained in the case of the foamed glass-ceramics sintered at 1000℃.

Designing for Long Campaign Life Blast Furnace (2)-The Simulation of Temperature Field of Lining and Cooling Apparatus

Through the numerical modeling of temperature field for Blast Furnace (BF) lining and stave coolers, it can tell designers how to design a cooler which the hot surface temperature is less than its critical temperature under very high heat flux. Applying low heat re- sistance lining and staves cooler to BF is good for a layer of slag skull frozen on the hot surface of cooling stave. As long as the slag skull can stand, the furnace wall is stable and the heat loss of furnace does not increase. This is the basic principle for designing long campa- ignship BF.

Temperature control for thermal treatment of aluminum alloy in a large-scale vertical quench furnace

The temperature control of the large-scale vertical quench furnace is very difficult due to its huge volume and complex thermal exchanges. To meet the technical requirement of the quenching process, a temperature control system which integrates temperature calibration and temperature uniformity control is developed for the thermal treatment of aluminum alloy workpieces in the large-scale vertical quench furnace. To obtain the aluminum alloy workpiece temperature, an air heat transfer model is newly established to describe the temperature gradient distribution so that the immeasurable workpiece temperature can be calibrated from the available thermocouple temperature. To satisfy the uniformity control of the furnace temperature, a second order partial differential equation(PDE) is derived to describe the thermal dynamics inside the vertical quench furnace. Based on the PDE, a decoupling matrix is constructed to solve the coupling issue and decouple the heating process into multiple independent heating subsystems. Then, using the expert control rule to find a compromise of temperature rising time and overshoot during the quenching process. The developed temperature control system has been successfully applied to a 31 m large-scale vertical quench furnace, and the industrial running results show the significant improvement of the temperature uniformity, lower overshoot and shortened processing time.

Research on the principle of space high-precision temperature control system of liquid crystals based Stokes polarimeter

The magnetic field is one of the most important parameters in solar physics,and a polarimeter is the key device to measure the solar magnetic field.Liquid crystals based Stokes polarimeter is a novel technology,and will be applied for magnetic field measurement in the first space-based solar observatory satellite developed by China,Advanced Space-based Solar Observatory.However,the liquid crystals based Stokes polarimeter in space is not a mature technology.Therefore,it is of great scientific significance to study the control method and characteristics of the device.The retardation produced by a liquid crystal variable retarder is sensitive to the temperature,and the retardation changes 0.09°per 0.10℃.The error in polarization measurement caused by this change is 0.016,which affects the accuracy of magnetic field measurement.In order to ensure the stability of its performance,this paper proposes a high-precision temperature control system for liquid crystals based Stokes polarimeter in space.In order to optimize the structure design and temperature control system,the temperature field of liquid crystals based Stokes polarimeter is analyzed by the finite element method,and the influence of light on the temperature field of the liquid crystal variable retarder is analyzed theoretically.By analyzing the principle of highprecision temperature measurement in space,a high-precision temperature measurement circuit based on integrated operational amplifier,programmable amplifier and 12 bit A/D is designed,and a high-precision space temperature control system is developed by applying the integral separation PI temperature control algorithm and PWM driving heating films.The experimental results show that the effect of temperature control is accurate and stable,whenever the liquid crystals based Stokes polarimeter is either in the air or vacuum.The temperature stability is within±0.0150℃,which demonstrates greatly improved stability for the liquid crystals based Stokes polarimeter.

A back analysis of the temperature field in the combustion volume space during underground coal gasification

The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2,3...,of 2.4,5.5,8.7...By adjusting the radius(2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.

TWO-DIMENSIONAL MATHEMATICAL MODEL OF COMBUSTION SPACE IN GLASS MELTING FURNACES

Under some assumptions and dividing the combustion space into several isothermal zones and isothermal surface elements, a two-dimensional mathematical model for combustion space in cross-fired glass melting furnaces was constructed. The finite element method and the Gauss integration were used to calculate direct ex-change areas, and a inverse matrix was used to obtained the total ex-change areas. The temperature distributions were obtained by itera-tions. Some results were presented to show the effects of the fire tem-perature distribution, the convective -heat transfer coefficients and the heat losses through crown surfaces on the temperature distributions.

The Effects of Space Dimension and Temperature on the Cross Mating of Three Cryptic Species of the Bemisia tabaci Complex in China

The sweetpotato whitefly Bemisia tabaci（Homoptera：Aleyrodidae）is a destructive pest of agriculture and horticulture worldwide.Recent phylogenetic analysis using mitochondrial cytochrome oxidase 1 sequences indicates that this whitefly is a species complex including at least 24 morphologically indistinguishable but genetically distinct cryptic species.In this study,the inter-species crosses of Middle East-Asia Minor 1（MEAM1）,Mediterranean（MED）and Asia II 7 cryptic species,which were referred to as B,Q and Cv biotypes before,were conducted in two different devices,leaf cages（7 cm3）and cylinder cages（280 cm3）,and at three temperatures of 22,30 and 38°C.Results indicated that no female progeny were produced in the reciprocal cross between MEAM1×Asia II 7,between MED×Asia II 7 cryptic species neither in leaf cage nor in cylinder cages,while 0.81 and 1.37% of females in the offspring were recorded in the reciprocal cross between MEAM1×MED in leaf cage experiments.Approximately 0.95-0.98% female progeny were recorded in the reciprocal cross between MEAM1×MED at 30°C,0.77% female progeny were recorded in the single cross direction between MEAM1 × MED at 22°C,and no female progeny were found in their reciprocal cross at 38°C in leaf cage.Our findings indicated that neither space dimension nor temperature have a significant effect on the hybridization of different B.tabaci cryptic species.

Analysis of temperature,stress,and displacement distributions of staves for a blast furnace

The temperature of gas flow inside a blast furnace （BF） changes significantly when the blast furnace is under unstable operations, and the temperature and stress distributions of cooling staves （CS） for BF work the same pattern. The effect of gas temperature on the temperature, stress, and displacement distributions of the cooling stave were analyzed as the gas temperature inside the blast furnace rose from 1000 to 1600℃ in 900 s. The results show that both the temperature and temperature gradient of the hot side of CS increase when the gas flow temperature inside BF rises. The temperature gradient of the hot side of CS is greater than that of the other area of CS and it can reach 65℃/mm. In the vertical direction of the hot side of CS, closer to the central part of CS, the stress intensity is greater than that of the other area of the hot side of CS, which causes cracks on the hot side of CS in the vertical di- rection. As the gas temperature increases, the stress intensity rate near the fixed pin increases and finally reaches 45 MPa/s. Fatigues near the fixed pin and bolts are caused by great stress intensity rate and the area around the pin can be damaged easily. The edge of CS bends toward the cold side and the central part of CS shifts toward the hot surface.

Antibacterial Properties of V-doped Titanium-bearing Blast Furnace Slag Prepared at Different Calcination Temperatures

Perovskite-type V-doped titanium-bearing blast furnace slag (VTBBFS) photocatalyst was prepared by high-temperature solid phase method.The influence of calcination temperature on the photocatalytic and antibacterial properties of VTBBFS was studied in details.Its composition and microstructure were evaluated by X-ray diffractometer,ultraviolet-visible absorption spectrometer,Fourier transform infrared spectrometer and scanning electron microscope.The antibacterial properties of VTBBFS to Candida albicans were investigated by flask oscillation method.The results showed that the optical absorption and antibacterial properties of VTBBFS were the best with 10%(ω) doping of vanadium,prepared at 800℃ for 2 h,and its sterilization rate was close to 100% to Candida albicans (ATCC10231).The minimum inhibitory and minimum bactericidal concentrations were 25 and 50 mg/mL.When the concentration was 0.2 μg/mL,the catalyst had the least toxic toxicity.

Dynamic simulation on effect of flame arrangement on thermal process of regenerative reheating furnace

By analyzing the characteristics of combustion and billet heating process, a 3-D transient computer fluid dynamic simulation system based on commercial software CFX4.3 and some self-programmed codes were developed to simulate the thermal process in a continuous heating furnace using high temperature air combustion technology. The effects of different switching modes on injection entrancement of multi burners, combustion and billet heating process in furnace were analyzed numerically, and the computational results were compared with on-site measurement, which verified the practicability of this numerical simulation system. The results indicate that the flow pattern and distribution of temperature in regenerative reheating furnace with partial same-side-switching combustion mode are favorable to satisfy the high quality requirements of reheating, in which the terminal heating temperature of billets is more than 1 460 K and the temperature difference between two nodes is not more than 10 K. But since the surface average temperature of billets apart fi＇om heating zone is only about 1 350 K and continued heating is needed in soaking zone, the design and operation of current state are still needed to be optimized to improve the temperature schedule of billet heating. The distribution of velocity and temperature in regenerative reheating furnace with same-side-switching combustion mode cannot satisfy the even and fast heating process. The terminal heating temperature of billets is lower than that of the former case by 30 K. The distribution of flow and temperature can be improved by using cross-switching combustion mode, whose terminal temperature of billets is about 1 470 K with small temperature difference within 10 K.

3D Numerical Analysis of the Arc Plasma Behavior in a Submerged DC Electric Arc Furnace for the Production of Fused MgO

A three dimensional steady-state magnetohydrodynamic model is developed for the arc plasma in a DC submerged electric arc furnace for the production of fused MgO. The arc is generated in a small semi-enclosed space formed by the graphite electrode, the molten bath and unmelted raw materials. The model is first used to solve a similar problem in a steel making furnace, and the calculated results are found to be in good agreement with the published measurements. The behavior of arcs with different arc lengths is also studied in the furnace for MgO production. From the distribution of the arc pressure on the bath surface it is shown that the arc plasma impingement is large enough to cause a crater-like depression on the surface of the MgO bath. The circulation of the high temperature air under the electrode may enhance the arc efficiency, especially for a shorter arc.

Explainable machine learning model for predicting molten steel temperature in the LF refining process

Accurate prediction of molten steel temperature in the ladle furnace(LF)refining process has an important influence on the quality of molten steel and the control of steelmaking cost.Extensive research on establishing models to predict molten steel temperature has been conducted.However,most researchers focus solely on improving the accuracy of the model,neglecting its explainability.The present study aims to develop a high-precision and explainable model with improved reliability and transparency.The eXtreme gradient boosting(XGBoost)and light gradient boosting machine(LGBM)were utilized,along with bayesian optimization and grey wolf optimiz-ation(GWO),to establish the prediction model.Different performance evaluation metrics and graphical representations were applied to compare the optimal XGBoost and LGBM models obtained through varying hyperparameter optimization methods with the other models.The findings indicated that the GWO-LGBM model outperformed other methods in predicting molten steel temperature,with a high pre-diction accuracy of 89.35%within the error range of±5°C.The model’s learning/decision process was revealed,and the influence degree of different variables on the molten steel temperature was clarified using the tree structure visualization and SHapley Additive exPlana-tions(SHAP)analysis.Consequently,the explainability of the optimal GWO-LGBM model was enhanced,providing reliable support for prediction results.

The deconvolution of lunar brightness temperature based on the maximum entropy method using Chang'e-2 microwave data

A passive and multi-channel microwave sounder onboard the Chang＇e-2 orbiter has successfully acquired microwave observations of the lunar surface and subsurface structure. Compared with the Chang＇e-1 orbiter, the Chang＇e-2 orbiter obtained more accurate and comprehensive microwave brightness temperature data, which are helpful for further research. Since there is a close relationship between mi- crowave brightness temperature data and some related properties of the lunar regolith, such as the thickness, temperature and dielectric constant, precise and high resolution brightness temperature data are necessary for such research. However, through the detection mechanism of the microwave sounder, the brightness temperature data ac- quired from the microwave sounder are weighted by the antenna radiation pattern, so the data are the convolution of the antenna radiation pattern with the lunar brightness temperature. In order to obtain the real lunar brightness temperature, a deconvolution method is needed. The aim of this paper is to solve the problem associated with per- forming deconvolution of the lunar brightness temperature. In this study, we introduce the maximum entropy method （MEM） to process the brightness temperature data and achieve excellent results. The paper mainly includes the following aspects： first, we introduce the principle of the MEM; second, through a series of simulations, the MEM has been verified as an efficient deconvolution method; and third, the MEM is used to process the Chang＇e-2 microwave data and the results are significant.

On a Heuristic Point of View about the Generalization of Curie Law to Cosmic Higgs Fields with the Casimir Effect

Condensed state physics demonstrates that the Curie temperature is the point at which spontaneous magnetization drops to zero, marking the critical transition where ferromagnetic or ferrimagnetic materials transform into paramagnetic substances. Below the Curie temperature, a material remains ferromagnetic;above it, the material becomes paramagnetic, with its magnetic field easily influenced by external magnetic fileds. For example, the Curie temperature of iron (Fe) is 1043 K, while that of neodymium magnets ranges from 583 to 673 K. From both physics and mathematics perspectives, examining the temperature properties of materials is essential, as it provides valuable insights into their electromagnetic and thermodynamic behaviors. This paper makes a bold assumption and, for the first time, carefully verifies the existence of a Casimir temperature at 0.00206 K under conditions of one-atomic spacing.

Furnace Temperature Curve Optimization Model Based on Differential Evolution Algorithm

When soldering electronic components onto circuit boards,the temperature curves of the reflow ovens across different zones and the conveyor belt speed significantly influence the product quality.This study focuses on optimizing the furnace temperature curve under varying settings of reflow oven zone temperatures and conveyor belt speeds.To address this,the research sequentially develops a heat transfer model for reflow soldering,an optimization model for reflow furnace conditions using the differential evolution algorithm,and an evaluation and decision model combining the differential evolution algorithm with the Technique for Order Preference by Similarity to Ideal Solution(TOPSIS)method.This approach aims to determine the optimal furnace temperature curve,zone temperatures of the reflow oven,and the conveyor belt speed.

Temperature Intelligent Control System of Large-Scale Standing Quench Furnace

Considering some characteristics of large-scale standing quench furnace, such as great heat inertia, evident time lag, strong coupling influence, hard to establish exact mathematical models of plant and etc, an artificial intelligent fuzzy control algorithm is put forward in this paper. Through adjusting the on-off ratio of electric heating elements, the temperature in furnace is controlled accurately. This paper describes structure and qualities of the large-scale standing quench furnace briefly, introduces constitution of control system, and expounds principle and implementation of intelligent control algorithm. The applied results prove that the intelligent control system can completely satisfy the technological requirements. Namely, it can realize fast increasing temperature with a little overshoot, exact holding temperature, and well-distributed temperature in quench furnace. It has raised the output and quality of aluminum material, and brought the outstanding economic and social benefits.

Physiological Response of Space Flight Mutation New Strains of Festuca arundinacea to High Temperature Stress and Comprehensive Evaluation

[Objective] The paper was to understand the physiological response of space flight mutation new strains of Festuca arundinacea to high temperature stress. [Method] The influence of high temperature stress on eco-physiological characteristics of 11 F. arundinacea materials was studied in a pot experiment.Physiological and biochemical indexes,including soluble protein content,superoxide dismutase( SOD),peroxidase( POD) and catalase( CAT) activities,were measured and analyzed once every 4 d for a total of three times. Subordinate function and grey rational analysis were used to comprehensively evaluate the heat resistance of 11 materials. [Result] The soluble protein content decreased with the extension of heat resistance stress,while SOD,POD and CAT activities showed an upward trend. The high temperature resistance of 11 F. arundinacea materials was evaluated by subordinate function method. The resistance order was SP5-85> SP5-60 > SP5-71 > SP5-42 > SP5-94 > SP5-7 > SP5-88 > F. arundinacea cv Shuicheng > SP5-5 > SP5-89 = F. arundinacea cv Qiancao No. 1. The relational order of various heat resistance indexes and heat resistance obtained by grey rational analysis was SOD > CAT > POD > soluble protein content. [Conclusion]The result provides a theoretical basis for stress physiology and stress breeding of cold season grass in southwest region.

Finite-time Stability of Heating Furnace Temperature Control System

A finite-time stabilization controller for the heating furnace temperature control system is proposed.Based on the extended Lyapunov finite-time stability theory and power integral method,a finite-time stable condition of the heating furnace temperature control system is given.The temperature of the heating furnace is directed by the finite-time stabilization controller to make it stable in finite time.And the quality and quantity of slabs is improved.The simulation example is presented to illustrate the applicability of the developed results.

Assessment of the Effect of Neyshabur Green Spatial Configuration on the Temperature of Land Surface and Heat Islands

Urban heat island is a global issue and a consequence of rapid urbanization that leads to higher land surface temperature in urban areas. The range is 0.6°C - 1.3°C compared to rural and suburban areas. LST (Land surface temperature) is an important parameter in determining the heat island. Understanding the relationship between green space configuration and LST is essential to the effective design of the mechanisms, which reduce the effect of urbanization on UHI (urban heat island). This study examines the correlation between LST and spatial configuration of green space in the urban landscape of Neyshabur city, Iran. Satellite images are obtained from Landsat ETM+ satellite sensor with a spatial resolution of 60 meters in August 2010 and used for the estimation of LST. In order to identify the configuration of green space, five configuration metrics LSI (landscape Shape Index), MPFD (Mean Patch Fractal Dimension), ED (Edge Density), MPS (Mean Patch Size) and MSI (Mean Shape Index) are used. In addition, configuration of the green space and temperature is compared by Pearson’s correlation-coefficient. Negative values represent a suppressive/negative effect on each other;the fact that other indicators of spatial configuration are inversely related to temperature means that they weaken the effect of UHI. Results of the study showed that the spatial configuration of the green space notably affects increased LST and UHI. On the other hand, the configuration indicator with the greatest impact on LST was ED, because with increase in margin density further decreases LST.

Measuring Conditions for the Determination of Lead in Iron-Matrix Samples Using Graphite Atomizers with/without a Platform in Graphite Furnace Atomic Absorption Spectrometry

In graphite furnace atomic absorption spectrometry (GF-AAS), the atomization process of lead occurring in graphite atomizers with/without a platform plate was investigated when palladium was added to an iron-matrix sample solution containing trace amounts of lead. Absorption profiles of a lead line were meas- ured at various compositions of iron and palladium. Variations in the gas temperature were also estimated with the progress of atomization, by using a two-line method under the assumption of a Boltzmann distribu- tion. Each addition of iron and palladium increased the lead absorbance in both the atomizers, indicating that iron or palladium became an effective matrix modifier for the determination of lead. Especially, palladium played a significant role for controlling chemical species of lead at the charring stage in the platform-type atomizer, to change several chemical species to a single species and eventually to yield a dominant peak of the lead absorbance at the atomizing stage. Furthermore, the addition of palladium delayed the peak after the gas atmosphere in the atomizer was heated to a higher temperature. These phenomena would be because the temperature of the platform at the charring stage was elevated more slowly compared to that of the furnace wall, and also because a thermally-stable compound, such as a palladium-lead solid solution, was produced by their metallurgical reaction during heating of the charring stage. A platform-type atomizer with palladium as the matrix modifier is recommended for the determination of lead in GF-AAS. The optimum condition for this was obtained in a coexistence of 1.0 × 10–2 g/dm3 palladium, when the charring at 973 K and then the atomizing at 3073 K were conducted.