Some interferences are often encountered in accelerator mass spectrometry (AMS) measurements, espe-cially for medium-heavy nuclide measurement. It is difficult for online discrimination of the nuclide of interest from...Some interferences are often encountered in accelerator mass spectrometry (AMS) measurements, espe-cially for medium-heavy nuclide measurement. It is difficult for online discrimination of the nuclide of interest from the interfering ones. In order to solve this problem, we developed a method to simulate the experimental spectra of medium-heavy nuclides in AMS measurements. The results obtained from this method are in good agreement with experimental values.展开更多
The possibility of using 209Bi as a new threshold detector to measurc high-energy neutrons was investigated for the first time. At the same time the experiment measured successfully the emitted neutron fiuence rate, e...The possibility of using 209Bi as a new threshold detector to measurc high-energy neutrons was investigated for the first time. At the same time the experiment measured successfully the emitted neutron fiuence rate, energy spectrum and dose equivalent rate distributions in the heavy ion target area using a detector complex including 209Bi, 115In, 27A1, 19F and 12C samples.展开更多
This paper presents a neutronics design of a 10 MW ordered-pebble-bed fluoride-salt-cooled high-temperature experimental reactor. Through delicate layout, a core with ordered arranged pebble bed can be formed,which ca...This paper presents a neutronics design of a 10 MW ordered-pebble-bed fluoride-salt-cooled high-temperature experimental reactor. Through delicate layout, a core with ordered arranged pebble bed can be formed,which can keep core stability and meet the space requirements for thermal hydraulics and neutronics measurements.Overall, objectives of the core include inherent safety and sufficient excess reactivity providing 120 effective full power days for experiments. Considering the requirements above, the reactive control system is designed to consist of 16 control rods distributed in the graphite reflector. Combining the large control rods worth about 18000–20000 pcm, molten salt drain supplementary means(-6980 to -3651 pcm) and negative temperature coefficient(-6.32 to -3.80 pcm/K) feedback of the whole core, the reactor can realize sufficient shutdown margin and safety under steady state. Besides, some main physical properties, such as reactivity control, neutron spectrum and flux, power density distribution, and reactivity coefficient,have been calculated and analyzed in this study. In addition, some special problems in molten salt coolant are also considered, including ~6Li depletion and tritium production.展开更多
基金Supported by the National Natural Science Foundation of China (No.10175094) and the Science Foundation of Guangxi University (X022013)
文摘Some interferences are often encountered in accelerator mass spectrometry (AMS) measurements, espe-cially for medium-heavy nuclide measurement. It is difficult for online discrimination of the nuclide of interest from the interfering ones. In order to solve this problem, we developed a method to simulate the experimental spectra of medium-heavy nuclides in AMS measurements. The results obtained from this method are in good agreement with experimental values.
基金Supported by the National Natural Science Foundation of China(19875070)
文摘The possibility of using 209Bi as a new threshold detector to measurc high-energy neutrons was investigated for the first time. At the same time the experiment measured successfully the emitted neutron fiuence rate, energy spectrum and dose equivalent rate distributions in the heavy ion target area using a detector complex including 209Bi, 115In, 27A1, 19F and 12C samples.
基金supported by the Chinese Academy of Sciences TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)Thorium uranium fuel cycle characteristics and key problem research Project(No.QYZDY-SSW-JSC016)
文摘This paper presents a neutronics design of a 10 MW ordered-pebble-bed fluoride-salt-cooled high-temperature experimental reactor. Through delicate layout, a core with ordered arranged pebble bed can be formed,which can keep core stability and meet the space requirements for thermal hydraulics and neutronics measurements.Overall, objectives of the core include inherent safety and sufficient excess reactivity providing 120 effective full power days for experiments. Considering the requirements above, the reactive control system is designed to consist of 16 control rods distributed in the graphite reflector. Combining the large control rods worth about 18000–20000 pcm, molten salt drain supplementary means(-6980 to -3651 pcm) and negative temperature coefficient(-6.32 to -3.80 pcm/K) feedback of the whole core, the reactor can realize sufficient shutdown margin and safety under steady state. Besides, some main physical properties, such as reactivity control, neutron spectrum and flux, power density distribution, and reactivity coefficient,have been calculated and analyzed in this study. In addition, some special problems in molten salt coolant are also considered, including ~6Li depletion and tritium production.
