Spectrum Feature Retrieval and Comparison of Remote Sensing Images Using Improved ISODATA Algorithm

Due to the large quantities of data and high relativity of the spectra of remote sensing images, K-L transformation is used to eliminate the relativity. An improved ISODATA(Interative Self-Organizing Data Analysis Technique A) algorithm is used to extract the spectrum features of the images. The computation is greatly reduced and the dynamic arguments are realized. The comparison of features between two images is carried out, and good results are achieved in simulation.

Feature spectrum extraction of human fingernails based on LCTF multispectral imaging

A multispectral imaging system consisting of liquid crystal tunable filter(LCTF)and charge coupled device(CCD)camera was used to collect the images of fingernail samples at intervals of 10 nm during the spectral range of 450-1 000 nm,and a multispectral image of human fingernails containing 56 bands was obtained.The accurate reflectivity information of fingernails was obtained through referring whiteboard comparative measurement method.Principal component analysis(PCA)and band index method were used to reduce the dimension of the sample images respectively and two feature spaces were obtained.Spectral angle mapping(SAM)was used to classify human fingernails in these two feature spaces.The classification accuracy were above 92.5%and 82.9%respectively.Therefore,the feature space obtained by the PCA can be used as the characteristic spectrum of human fingernails,which provides a reliable basis for the analysis of multispectral spectrum of fingernails and human health assessment in the future.

Jamming Recognition Based on Feature Fusion and Convolutional Neural Network

The complicated electromagnetic environment of the BeiDou satellites introduces vari-ous types of external jamming to communication links,in which recognition of jamming signals with uncertainties is essential.In this work,the jamming recognition framework proposed consists of fea-ture fusion and a convolutional neural network(CNN).Firstly,the recognition inputs are obtained by prepossessing procedure,in which the 1-D power spectrum and 2-D time-frequency image are ac-cessed through the Welch algorithm and short-time Fourier transform(STFT),respectively.Then,the 1D-CNN and residual neural network(ResNet)are introduced to extract the deep features of the two prepossessing inputs,respectively.Finally,the two deep features are concatenated for the following three fully connected layers and output the jamming signal classification results through the softmax layer.Results show the proposed method could reduce the impacts of potential feature loss,therefore improving the generalization ability on dealing with uncertainties.

Feature extraction of ship-radiated noise using higher-order spectrum

The features of the ship noises are analyzed by using the higher-order spectrum (HOS) after studying their distribution. The results show that the different ship noise has different ranges of the main frequency. The main frequencies of the first class ships are less than 120 Hz, while the second class ships drop in 130 Hz -- 320 Hz. The different relationship between w1 and w2 corresponds to different bispectrum graph. There are the same results in the trispectrum. The feature vector is consist of the wls which correspond to the maximum bispectrum B(wl, wl) and the maximum trispectrum B(wl, w1,wl) respectively, the al, w2 which correspond to the maximum bispectrum B(wl, w2).

Passive sonar identification (Ⅲ): Feature extraction and pattern plates of double-frequency spectrum as well as average power spectrum

This series of papers deal with vessel recognition. The project is conducted by using fuzzy neural networks and basing on the spectra of vessel radiated-noise. Based on the studies of a large amount of ship radiated-noise data, which has been collected from actual ships on the sea, effectively recognizable features are extracted. Such features include line-spectrum features, stationary and nonstationary spectrum features as well as rhythm features. Finally the categorization are tested by unknown samples on the sea, including 33 surface vessels, 8 underwater vessels in 30 operating conditions. Methods for memorization and classilication are also explored in the project. Paper (Ⅲ) is the thirird in the series. It deals with the extraction method of modulation information in double-frequency power spectrum and the establishment of pattern plate of double-frequency spectrum as well as average power spectrum. To extract features from double-frequency spectrum, the tendency of wave is subtracted from the wave of each channel and the modulation of high frequency is compensated. The modulation degree of lines is shown by relative Value and converted to fuzzy value by fuzzy function. The pattern-plate of double-frequency spectrum memorises stable line and its respective modulation strength. The pattern-plate of average power spectrum memorizes the spectra mean of typical samples and the standard variance

Classification of hyperspectral remote sensing images using frequency spectrum similarity

An algorithm of hyperspectral remote sensing images classification is proposed based on the frequency spectrum of spectral signature.The spectral signature of each pixel in the hyperspectral image is taken as a discrete signal,and the frequency spectrum is obtained using discrete Fourier transform.The discrepancy of frequency spectrum between ground objects' spectral signatures is visible,thus the difference between frequency spectra of reference and target spectral signature is used to measure the spectral similarity.Canberra distance is introduced to increase the contribution from higher frequency components.Then,the number of harmonics involved in the proposed algorithm is determined after analyzing the frequency spectrum energy cumulative distribution function of ground object.In order to evaluate the performance of the proposed algorithm,two hyperspectral remote sensing images are adopted as experimental data.The proposed algorithm is compared with spectral angle mapper (SAM),spectral information divergence (SID) and Euclidean distance (ED) using the product accuracy,user accuracy,overall accuracy,average accuracy and Kappa coefficient.The results show that the proposed algorithm can be applied to hyperspectral image classification effectively.

TV White Space Spectrum Analysis Based on Machine Learning

Exploration of TV white space(TVWS)is a promising solution to mitigate the spectrum shortage and provide opportunities for new applications.In this paper,we present a detailed analysis of spectrum utilisation over TVWS at different locations in London.Both short-term and long-term outdoor measurement campaigns are conducted over large scales to better understand the spectrum features and variations across multiple locations and time periods.Different from most fixed-location-only measurements,we also drive along the main streets of London with a portable moving node to measure the on-route spectrum density along with the corresponding geographical information,which allows us to study the features and variations of spectrum use through a continuous space.To better analyse the dynamic spectrum utilisation,a machine learning based analysis algorithm is developed over the real-world measurements.This approach allows us to characterise the similarity and variability in spectrum usage within and among different channels,locations,and time instances,which is critical for the secondary system deployment to efficiently exploit the white space.

Doppler effect in high-speed rail seismic wavefield and its application

We demonstrate by theoretical analysis that periodically distributed viaduct piers of high-speed rail result in the Doppler effect in the seismic wavefield of high-speed rail at specific frequencies and analyze the Doppler effect’s influence on the wavefield’s spectrum feature.We further verify our theoretical prediction by using observational data of the high-speed rail seismic wavefield in Rongcheng,Hebei Province,China.We find that the wavefield component with a noticeable Doppler effect vibrates in the propagation direction and only has a unique apparent wave speed,indicating that P-wave is dominant.Furthermore,we propose a speed measurement method based on the Doppler effect and measure the wave speed of the medium along the rail.Measurement results are highly stable and consistent.