Process and performance of DAAF microspheres prepared by continuous integration from synthesis to spherical coating based on microfluidic system

In order to improve the energy output consistency of 3, 3’-diamino-4, 4’-azoxyfurazan(DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber(F2604), nitrocellulose(NC) and NC/glycidyl azide polymer(GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope(SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction(XRD), differential scanning calorimetry(DSC), thermo-gravimetric(TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

High-level Stark Effect and Spectrum of Spherical Nanometer System

In the electric field and layer-to-layer interaction energy, the law of split-level of high-level Stark effect of spherical nanometer system is explored as well as the frequency of spectrum, intensity and size effect of coefficient of spontaneous radiation. Taking three layers CdS/HgS spherical nanometer system as an example, the influence of the electric field and layer-to- layer interaction energy is explored on Stark effect and spectrum. The results show that in the Stark effect system, the energy level is split based on 1, 3, ..., （2n-1）, when it is in the electric field only, similar to the hydrogen atoms; and in the electric field and layer-to-layer interaction, it is split based on 1, 4, ~ -., n2; with the quantum transition, the frequency of the spectrum decreases with the increasing size of the system; apart from a few spectral lines, the intensity of most spectral lines will decreased as the size increases; while the coefficient of spontaneous radiation will increase with the increasing size; the electric field will cause the changes of spectrum frequency; its spectrum frequency shift is proportional to the square of the electric field intensity; apart from a few spectral lines, the frequency shift of spectral lines that is caused by the electric field and layer-to-layer interaction will decrease as the size increases; the interaction will make the level of electronic energy level lower slightly （the order of magnitude is between 10-7-10-9 eV）, the slightly increased spectrum intensity and the slightly increased value of coefficient of spontaneous radiation, but it will not influence the frequency of spectrum, intensity, and the trend that coefficient of spontaneous radiation changes with the size; when the size is smaller, the layer-to-layer interaction effect will be significant.

Evaluation of visual quality of spherical and aspherical intraocular lenses by Optical Quality Analysis System

AIM： To evaluate the impact of spherical and aspherical intraocular lenses on the postoperative visual quality of age-related cataract patients using Optical Quality Analysis System （OQAS）. METHODS： Seventy-four eyes with age-related cataracts were randomly divided into spherical and aspherical lens implantation groups. Best-corrected visual acuity （BCVA） was measured preoperatively, one day, one week, two weeks, one month and two months after surgery. A biometric systems analysis using the OQAS objective scattering index （OSI） was performed. RESULTS： There were no significant differences in visual acuity （P〉0.05） before and after spherical and aspheric lens implantation. There was a negative linear correction between the OSI value and BCVA （t-=-0.634, P=-0.000）, and positive corrections between the OSI value and the lens LOCUS III value of nucleus color （NC）, nucleus opacity （NO）, cortex （C） and posterior lens capsular （P） （r=0.704, P=0.000; r=0.514, P=0.000; r=0.276, P=0.020; r=0.417, P=-0.000, respectively）. OSI values of spherical vs aspherical lenses were 11.5±3.6 vs 11.8±3.4, 4.1±0.9 vs 3.3±0.8, 3.5±0.9 vs 2.7±0.7, 3.3±0.8 vs 2.6±0.7, 3.2±0.7 vs 2.5±0.8, and 3.2±0.8 vs 2.50.8 before and ld, 1, 2wk, 1 and 2mo after surgery, respectively. All time points varied significantly （P〈0.01） between the two groups. CONCLUSION： Aspherical IOLs does not significantly affect visual acuity compared with spherical IOLs. The OSI value, was significantly lower in the aspherical lens group compared with the spherical lens. This study shows that objective visual quality of aspheric IOLs is better than that of the spherical lens by means of OQAS biological measurement method.

Design and Strength Analysis of A Spherical Connector for Lifting Subsystem in Deep Sea Mining System

A flexible connector of lifting pipes in a deep sea mining system is designed. The buttress thread （ based on API standard） is used and foreign experience in connector design is referred to. With this kind of connector, the lifting pipe wiU only bear the axial force, free of moment. The strength of the connector is analyzed in detail, including the connecting strength of the buttress thread, the dynamic load of the pipe system, pressures inside and outside of the pipe, the lateral stress of the pipe wall and so on. Especially, a geometric model is built for 3-D contact stress analysis. The distribution graph of contact stress is presented. It is indicated that the strength of the spherical connector meets the demand.

Coupling Effect between Equilibrium Field and Heating Field and Modification of the Power Supply System on SUNIST Spherical Tokamak

Strong inductive coupling between the heating field and equilibrium field is confirmed to be responsible for the poor plasma equilibrium in initial discharges on the SUNIST spherical tokamak. A modification project for the power supply system of equilibrium field coils is successfully performed to increase the duration time of plasma current flattop from much less than 1ms to about 2 ms.

Analytical solution for the time-fractional heat conduction equation in spherical coordinate system by the method of variable separation

In this paper,using the fractional Fourier law,we obtain the fractional heat conduction equation with a time-fractional derivative in the spherical coordinate system.The method of variable separation is used to solve the timefractional heat conduction equation.The Caputo fractional derivative of the order 0 〈 α≤ 1 is used.The solution is presented in terms of the Mittag-Leffler functions.Numerical results are illustrated graphically for various values of fractional derivative.

Effects of Spherical Aggregates Addition on Properties of Al2O3-SiO2 System Castables

Compared with traditional aggregates,spherical aggregates with high flowability,easy control of particle size distribution and favor of dense packing and so on,are expected to replace traditional aggregates as important raw materials for future high performance refractories. Therefore,investigation of effects of spherical aggregates addition on properties of refractories becomes very meaningful. Using A70 mullite traditional aggregates and A70 mullite spherical aggregates, bauxite homogenization powder,microsilica,and calcium aluminate cement as raw materials,different AlO-SiOsystem low cement castables were prepared by replacing conventional aggregates with spherical aggregates. The effect of spherical aggregates addition on workability and mechanical properties of castables after heated at different temperatures was researched,and microstructure of the specimen was analyzed by SEM. Compared with traditional irregularly shaped aggregates,spherical aggregates endow castables with better flowability and easy pump ability. By introduction of spherical aggregates into the castables,flowability and pumpability are significantly improved,and water addition and ball completely sunk time are reduced. The introduction of spherical aggregates is favorable to density and cold crushing strength of castables,but unfavorable to CMOR. The effect of spherical aggregates addition on HMOR at1 400 ℃ can be negligible. Microstructure analysis showsthat the boundary bonding between spherical aggregates and matrix is strong,similar to the traditional aggregates.

Systematic study on the proton radioactivity of spherical proton emitters

In this study, based on a two-potential approach, we systematically investigated the proton radioactivity half-lives of spherical proton emitters with 69≤Z≤81 from the ground and/or isomeric state, choosing the nuclear potential to be a modified Woods–Saxon potential that contains the isospin effect of the daughter nucleus. It was found that the calculated half-lives could reproduce the experimental data well. Furthermore, we extended this model to predict the half-lives of 17 protonemitting candidates whose radioactivity is energetically allowed or observed but not yet quantified in NUBASE2020. For comparison, the unified fission model, Coulomb potential and proximity potential model, universal decay law for proton emission, and new Geiger–Nuttall law were also used. All the predicted results are consistent with each other.

MECHANICAL ANALYSIS OF ORBIT TRACKING MOVEMENT OF FEED SYSTEM IN LARGE SPHERICAL RADIO-TELESCOPE

The curve equation and its mechanics analysis of suspended-cable under the condition of end load are given. Then on the basis of it, the mechanical analysis of suspended-cable system for large spherical radio-telescope is studied, and procedures of the control for the orbit tracking movement of the line feed in large spherical radiotelescope are given. The validity of the results mentioned above is confirmed by means of computer simulations.

Generation of a novel spherical chaotic attractor from a new three-dimensional system

A new three-dimensional （3D） system is constructed and a novel spherical chaotic attractor is generated from the system. Basic dynamical behaviors of the chaotic system are investigated respectively. Novel spherical chaotic attractors can be generated from the system within a wide range of parameter values. The shapes of spherical chaotic attractors can be impacted by the variation of parameters. Finally, a simpler 3D system and a more complex 3D system with the same capability of generating spherical chaotic attractors are put forward respectively.

Three-dimensional magnetotelluric modeling in the spherical and Cartesian coordinate systems:A comparative study

With the increase in the coverage area of magnetotelluric data,three-dimensional magnetotelluric modeling in spherical coordinates and its differences with respect to traditional Cartesian modeling have gradually attracted attention.To fully understand the influence of the Earth’s curvature and map projection deformations on Cartesian modeling,qualitative and quantitative analyses based on realistic three-dimensional models need to be examined.Combined with five representative map projections,a type of model conversion method that transforms the original spherical electrical conductivity model to Cartesian coordinates is described in this study.The apparent resistivity differences between the spherical western United States electrical conductivity model and the corresponding five Cartesian models are then compared.The results show that the cylindrical equal distance map projection has the smallest error.A meridian convergence correction resulting from the deformation of the map projection is introduced to rotate the Cartesian impedance tensor from grid north to geographic north,which reduces differences from the spherical results.On the basis of the magnetotelluric field data,the applicability of the Cartesian coordinate system to western and contiguous United States models is quantitatively evaluated.Precise interpretations of the contiguous United States model were found to require spherical coordinates.

Effects of Spherical Light-weight Aggregates Additions on Workability and Mechanical Properties of Al_2O_3-SiO_2 System Castables

In order to clarify the effect of spherical light-weight aggregates addition on properties of A12 07 - Si02 system castables, adopting ATO mullite traditional light-weight aggregates and ATO mullite spherical light-weight aggre- gates, bauxite homogenization powder, microsilica , cal- cium aluminate cement as main raw materials, light- weight Al2 03 - SiO2 system castables were prepared by replacing conventional light-weight aggregate with spherical light-weight aggregates. The effects of spheri- cal light-weight aggregates addition on workability, me- chanical properties of castables after heated at different temperatures were researched; the microstructure of the aggregates was analyzed by SEM. The result shows that the introduction of spherical light-weight aggregates can significantly improve the flowability and reduce the water addition of the castables. Water demand of the castable is reduced from 18% with the conventional light-weight aggregates to 14% with spherical light-weight aggre- gates. In addition, light-weight castables prepared by spherical aggregates can keep the same workability with- in a wider range of water addition. Therefore, spherical aggregates are user-friendly. The introduction of spheri- cal light-weight aggregates is favorable to packing densi- ty and mechanical properties of castables, such as cold crushing strength, cold modulus of rupture, hot modulus of rupture at 1 200℃.

Global Static Solutions of the Spherically Symmetric Vlasov-Einstein-Maxwell (VEM) System for Low Charge

We consider the VEM system in the context of spherical symmetry and we try to establish a global static solutions with isotropic pressure that approaches Minkowski spacetime at infinity and have a regular center. To be in accordance with numerical investigation we take here low charge particles.

Analytical Solutions and Computer Simulations of the Evolution of Flat Temperature Profiles in Spherical FRRPP Systems

The free-radical retrograde-precipitation (FRRPP) process was recently brought into the quantitative areas of work, based on the discovery of possibility of flat temperature profiles in spherical reactive domain systems. With an approximate decoupling analysis of the energy equation from the component-balance equations, these flat temperature profiles were found to be either stable or unstable. Moreover, resulting evolution of the flat profiles has been found to be expressed analytically through the so-called exponential Integral function, which has been shown to be quantitatively inaccurate during the early times of the process. This work tries to resolve this inaccuracy problem, by comparing the exponential integral results with polynomial approximation and numerical results. The result is that for the stable sys-tem, the linearized treatment of the evolution of flat temperature profiles is valid at the early 30% - 40% in the tem-perature axis, while the remainder of the evolution curve is well-represented by the application of the exponential integral function. For the unstable system, the only thing that can be generalized is that both linear and cubic polynomial approximations are reasonably accurate at very small times and temperatures close to initial values.

Numerical study of plasmas start-up by electron cyclotron waves in NCST spherical tokamak and CN-H1 stellarator

According to the physics of tokamak start-up,this study constructs a zero-dimensional(0D)model applicable to electron cyclotron(EC)wave assisted start-up in NCST spherical torus(spherical tokamak)and CN-H1 stellarators.Using the constructed 0D model,the results obtained in this study under the same conditions are compared and validated against reference results for pure hydrogen plasma start-up in tokamak.The results are in good agreement,especially regarding electron temperature,ion temperature and plasma current.In the presence of finite Ohmic electric field in the spherical tokamak,a study on the EC wave assisted start-up of the NCST plasma at frequency of 28 GHz is conducted.The impact of the vertical magnetic field B_(v)on EC wave assisted start-up,the relationship between EC wave injection power P_(inj),Ohmic electric field E,and initial hydrogen atom density n_(H0)are explored separately.It is found that under conditions of Ohmic electric field lower than ITER(~0.3 V m^(-1)),EC wave can expand the operational space to achieve better plasma parameters.Simulating the process of28 GHz EC wave start-up in the CN-H1 stellarator plasma,the plasma current in the zerodimensional model is replaced with the current in the poloidal coil of the stellarator.Plasma startup can be successfully achieved at injection powers in the hundreds of kilowatts range,resulting in electron densities on the order of 10^(17)-10^(18)m^(-3).

Fully Completed Spherical Fuzzy Approach-Based Z Numbers(PHIModel)for Enhanced Group Expert Consensus

This study aims to establish an expert consensus and enhance the efficacy of decision-making processes by integrating Spherical Fuzzy Sets(SFSs)and Z-Numbers(SFZs).A novel group expert consensus technique,the PHImodel,is developed to address the inherent limitations of both SFSs and the traditional Delphi technique,particularly in uncertain,complex scenarios.In such contexts,the accuracy of expert knowledge and the confidence in their judgments are pivotal considerations.This study provides the fundamental operational principles and aggregation operators associated with SFSs and Z-numbers,encompassing weighted geometric and arithmetic operators alongside fully developed operators tailored for SFZs numbers.Subsequently,a case study and comparative analysis are conducted to illustrate the practicality and effectiveness of the proposed operators and methodologies.Integrating the PHI model with SFZs numbers represents a significant advancement in decision-making frameworks reliant on expert input.Further,this combination serves as a comprehensive tool for decision-makers,enabling them to achieve heightened levels of consensus while concurrently assessing the reliability of expert contributions.The case study results demonstrate the PHI model’s utility in resolving complex decision-making scenarios,showcasing its ability to improve consensus-building processes and enhance decision outcomes.Additionally,the comparative analysis highlights the superiority of the integrated approach over traditional methodologies,underscoring its potential to revolutionize decision-making practices in uncertain environments.

Swimming velocity of spherical squirmers in a square tube at finite fluid inertia

The three-dimensional lattice Boltzmann method(LBM)is used to simulate the motion of a spherical squirmer in a square tube,and the steady motion velocity of a squirmer with different Reynolds numbers(Re,ranging from 0.1 to 2)and swimming types is investigated and analyzed to better understand the swimming characteristics of microorganisms in different environments.First,as the Reynolds number increases,the effect of the inertial forces becomes significant,disrupting the squirmer's ability to maintain its theoretical velocity.Specifically,as the Reynolds number increases,the structure of the flow field around the squirmer changes,affecting its velocity of motion.Notably,the swimming velocity of the squirmer exhibits a quadratic relationship with the type of swimming and the Reynolds number.Second,the narrow tube exerts a significant inhibitory effect on the squirmer motion.In addition,although chirality does not directly affect the swimming velocity of the squirmer,it can indirectly affect the velocity by changing its motion mode.

Terahertz quasi-perfect vortex beam with integer-order and fractional-order generated by spiral spherical harmonic axicon

We propose a new method to generate terahertz perfect vortex beam with integer-order and fractional-order. A new optical diffractive element composed of the phase combination of a spherical harmonic axicon and a spiral phase plate is designed and called spiral spherical harmonic axicon. A terahertz Gaussian beam passes through the spiral spherical harmonic axicon to generate a terahertz vortex beam. When only the topological charge number carried by spiral spherical harmonic axicon increases, the ring radius of terahertz vortex beam increases slightly, so the beam is shaped into a terahertz quasi-perfect vortex beam. Importantly, the terahertz quasi-perfect vortex beam can carry not only integer-order topological charge number but also fractional-order topological charge number. This is the first time that vortex beam and quasi-perfect vortex beam with fractional-order have been successfully realized in terahertz domain and experiment.

Implementation of a particle-in-cell method for the energy solver in 3D spherical geodynamic modeling

The thermal evolution of the Earth’s interior and its dynamic effects are the focus of Earth sciences.However,the commonly adopted grid-based temperature solver is usually prone to numerical oscillations,especially in the presence of sharp thermal gradients,such as when modeling subducting slabs and rising plumes.This phenomenon prohibits the correct representation of thermal evolution and may cause incorrect implications of geodynamic processes.After examining several approaches for removing these numerical oscillations,we show that the Lagrangian method provides an ideal way to solve this problem.In this study,we propose a particle-in-cell method as a strategy for improving the solution to the energy equation and demonstrate its effectiveness in both one-dimensional and three-dimensional thermal problems,as well as in a global spherical simulation with data assimilation.We have implemented this method in the open-source finite-element code CitcomS,which features a spherical coordinate system,distributed memory parallel computing,and data assimilation algorithms.

A brand new green coating technology for realizing the regulation of spherical propellant energy release process

To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.