A new compact model has been introduced to model on-chip spiral transformers.Unlike conventional models,which are often a compound of two spiral inductor models(i.e.,the combination of two coupledΠor 2-Πsub-circuit...A new compact model has been introduced to model on-chip spiral transformers.Unlike conventional models,which are often a compound of two spiral inductor models(i.e.,the combination of two coupledΠor 2-Πsub-circuits),our new model only uses 12 elements to model the whole structure in the form of T topology.The new model is based on the physical meaning,and the process of model derivation is also presented.In addition,a simple parameter extraction procedure is proposed to get the elements' values without any fitting and optimization. In this procedure,a new method has been developed for the parameter extraction of the ladder circuit,which is commonly used to represent the skin effect.In order to verify the model's validity and accuracy,we have compared the simulated and measured self-inductance,quality factor,coupling coefficient and insertion loss,and an excellent agreement has been found over a broad frequency range up to the resonant frequency.展开更多
A unity transformation model (UTM) was presented for flexible NC machining of spiral bevel gears and hypoid gears. The model can support various machining methods for Gleason spiral bevel gears and hypoid gears, inclu...A unity transformation model (UTM) was presented for flexible NC machining of spiral bevel gears and hypoid gears. The model can support various machining methods for Gleason spiral bevel gears and hypoid gears, including generation machining and formation machining for wheel or pinion on a universal five-axis machining center, and then directly produce NC codes for the selected machining method. Wheel machining and pinion machining under UTM were simulated in Vericut 6.0 and tested on a five-axis machining center TDNC-W2000 with NC unit TDNC-H8. The results from simulation and real-cut verify the feasibility of gear machining under UTM as well as the correctness of NC codes.展开更多
基金Project supported by the National Natural Science Foundation of China(No.61106024)
文摘A new compact model has been introduced to model on-chip spiral transformers.Unlike conventional models,which are often a compound of two spiral inductor models(i.e.,the combination of two coupledΠor 2-Πsub-circuits),our new model only uses 12 elements to model the whole structure in the form of T topology.The new model is based on the physical meaning,and the process of model derivation is also presented.In addition,a simple parameter extraction procedure is proposed to get the elements' values without any fitting and optimization. In this procedure,a new method has been developed for the parameter extraction of the ladder circuit,which is commonly used to represent the skin effect.In order to verify the model's validity and accuracy,we have compared the simulated and measured self-inductance,quality factor,coupling coefficient and insertion loss,and an excellent agreement has been found over a broad frequency range up to the resonant frequency.
基金Supported by National High Technology Research and Development Program ("863" Program, No. 2007AA042005)
文摘A unity transformation model (UTM) was presented for flexible NC machining of spiral bevel gears and hypoid gears. The model can support various machining methods for Gleason spiral bevel gears and hypoid gears, including generation machining and formation machining for wheel or pinion on a universal five-axis machining center, and then directly produce NC codes for the selected machining method. Wheel machining and pinion machining under UTM were simulated in Vericut 6.0 and tested on a five-axis machining center TDNC-W2000 with NC unit TDNC-H8. The results from simulation and real-cut verify the feasibility of gear machining under UTM as well as the correctness of NC codes.