Magnetic Field Curves and Magnetic Equipotential Surfaces around Crossing Electrical Wires Replacing Classical Magnetic Field Lines

This article is based on a recent model specifically defining magnetic field values around electrical wires. With this model, calculations of field around parallel wires were obtained. Now, this model is extended with the new concept of magnetic equipotential surface to magnetic field curves around crossing wires. Cases of single, double, and triple wires are described. Subsequent article will be conducted for more general scenarios where wires are neither infinite nor parallel.

Approximate merging of B-spline curves and surfaces

Applying the distance function between two B-spline curves with respect to the L2 norm as the approximate error, we investigate the problem of approximate merging of two adjacent B-spline curves into one B-spline curve. Then this method can be easily extended to the approximate merging problem of multiple B-spline curves and of two adjacent surfaces. After minimizing the approximate error between curves or surfaces, the approximate merging problem can be transformed into equations solving. We express both the new control points and the precise error of approximation explicitly in matrix form. Based on homogeneous coordinates and quadratic programming, we also introduce a new framework for approximate merging of two adjacent NURBS curves. Finally, several numerical examples demonstrate the effectiveness and validity of the algorithm.

A fast direct point-by-point generating algorithm for B Spline curves and surfaces

Traditional generating algorithms for B Spline curves and surfaces require approximation methods where how to increment the parameter to get the best approximation is problematic; or they take the pixel-based method needing matrix trans- formation from B Spline representation to Bézier form. Here, a fast, direct point-by-point generating algorithm for B Spline curves and surfaces is presented. The algorithm does not need matrix transformation, can be used for uniform or nonuniform B Spline curves and surfaces of any degree, and has high generating speed and good rendering accuracy.

RECONSTRUCTION OF SYMMETRIC B-SPLINE CURVES AND SURFACES

A method to reconstruct symmetric B-spline curves and surfaces is presented. The symmetry property is realized by using symmetric knot vector and symmetric control points. Firstly, data points are divided into two parts based on the symmetry axis or symmetry plane extracted from data points. Then the divided data points are parameterized and a symmetric knot vector is selected in order to get symmetric B-spline basis functions. Constraint equations regarding the control points are deduced to keep the control points of the B-spline curve or surface to be symmetric with respect to the extracted symmetry axis or symmetry plane. Lastly, the constrained least squares fitting problem is solved with the Lagrange multiplier method. Two examples from industry are given to show that the proposed method is efficient, robust and able to meet the general engineering requirements.

Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling

Textured surfaces with certain micro/nano structures have been proven to possess some advanced functions,such as reducing friction,improving wear and increasing wettability.Accurate prediction of micro/nano surface textures is of great significance for the design,fabrication and application of functional textured surfaces.In this paper,based on the kinematic analysis of cutter teeth,the discretization of ultrasonic machining process,transformation method of coordinate systems and the cubic spline data interpolation,an integrated theoretical model was established to characterize the distribution and geometric features of micro textures on the surfaces machined by different types of ultrasonic vibration-assisted milling(UVAM).Based on the theoretical model,the effect of key process parameters(vibration directions,vibration dimensions,cutting parameters and vibration parameters)on tool trajectories and microtextured surface morphology in UVAM is investigated.Besides,the effect of phase difference on the elliptical shape in 2D/3D ultrasonic elliptical vibration-assisted milling(UEVAM)was analyzed.Compared to conventional numerical models,the method of the cubic spline data interpolation is applied to the simulation of microtextured surface morphology in UVAM,which is more suitable for characterizing the morphological features of microtextured surfaces than traditional methods due to the presence of numerous micro textures.The prediction of surface roughness indicates that the magnitude of ultrasonic amplitude in z-direction should be strictly limited in 1D rotary UVAM,2D and 3D UEVAM due to the unfavorable effect of axial ultrasonic vibration on the surface quality.This study can provide theoretical guidance for the design and fabrication of microtextured surfaces in UVAM.

Fairing of Parametric Cubic B-spline Curves and Bicubic B-spline Surfaces

A method of fairing parametric cubic B_spline curves and bicubic B_spline surfaces is presented. The basic idea of the method is to reposition the control points by an optimization process.A new objectijve function presented is based on the variation of the third order derivatives of the cubic B_spline curves and bicubic B_spline surfaces at the nodes. The curves and surfaces faired using this method tend to possess curvature continuities. The numerical examples show that the effect of this method is acceptable.

Hybrid Nanofluid Flow over a Stretching Curved Surface with Induced Magnetic Field and Homogeneous-Heterogeneous Reactions

This study explores the 2D stretching flow of a hybrid nanofluid over a curved surface influenced by a magnetic field and reactions. A steady laminar flow model is created with curvilinear coordinates, considering thermal radiation, suction, and magnetic boundary conditions. The nanofluid is made of water with copper and MWCNTs as nanoparticles. The equations are transformed into nonlinear ODEs and solved numerically. The model’s accuracy is confirmed by comparing it with published data. Results show that fluid velocity increases, temperature decreases, and concentration increases with the curvature radius parameter. The hybrid nanofluid is more sensitive to magnetic field changes in velocity, while the nanofluid is more sensitive to magnetic boundary coefficient changes. These insights can optimize heat and mass transfer in industrial processes like chemical reactors and wastewater treatment.

High-Order Method with Moving Frames to Compute the Covariant Derivatives of Vectors on General 2D Curved Surfaces

The covariant derivative is a generalization of differentiating vectors.The Euclidean derivative is a special case of the covariant derivative in Euclidean space.The covariant derivative gathers broad attention,particularly when computing vector derivatives on curved surfaces and volumes in various applications.Covariant derivatives have been computed using the metric tensor from the analytically known curved axes.However,deriving the global axis for the domain has been mathematically and computationally challenging for an arbitrary two-dimensional(2D)surface.Consequently,computing the covariant derivative has been difficult or even impossible.A novel high-order numerical scheme is proposed for computing the covariant derivative on any 2D curved surface.A set of orthonormal vectors,known as moving frames,expand vectors to compute accurately covariant derivatives on 2D curved surfaces.The proposed scheme does not require the construction of curved axes for the metric tensor or the Christoffel symbols.The connectivity given by the Christoffel symbols is equivalently provided by the attitude matrix of orthonormal moving frames.Consequently,the proposed scheme can be extended to the general 2D curved surface.As an application,the Helmholtz‐Hodge decomposition is considered for a realistic atrium and a bunny.

Judging or setting weight steady-state of rational Bézier curves and surfaces

Many works have investigated the problem of reparameterizing rational B^zier curves or surfaces via MSbius transformation to adjust their parametric distribution as well as weights, such that the maximal ratio of weights becomes smallerthat some algebraic and computational properties of the curves or surfaces can be improved in a way. However, it is an indication of veracity and optimization of the reparameterization to do prior to judge whether the maximal ratio of weights reaches minimum, and verify the new weights after MSbius transfor- mation. What＇s more the users of computer aided design softwares may require some guidelines for designing rational B6zier curves or surfaces with the smallest ratio of weights. In this paper we present the necessary and sufficient conditions that the maximal ratio of weights of the curves or surfaces reaches minimum and also describe it by using weights succinctly and straightway. The weights being satisfied these conditions are called being in the stable state. Applying such conditions, any giving rational B6zier curve or surface can automatically be adjusted to come into the stable state by CAD system, that is, the curve or surface possesses its optimal para- metric distribution. Finally, we give some numerical examples for demonstrating our results in important applications of judging the stable state of weights of the curves or surfaces and designing rational B6zier surfaces with compact derivative bounds.

ANOTHER TYPE OF GENERALIZED BALL CURVES AND SURFACES

In 2000, Wu presented two new types of generalized Ball curves, one of which is called an NB1 curve located between the Wang-Ball curve and the Said-Ball curve. In this article, the authors aim to discuss properties of NB1 curves and surfaces, including the recursive algorithms, conversion algorithms between NB1 and Bezier curves and surfaces, etc. In addition the authors compare the computation efficiency of recursive algorithms for the NB1 and above mentioned two generalized Ball curves and surfaces.

Reconstruction of B-spline surface by interpolating boundary curves and approximating inner points

In this paper, we present an algorithm for reconstruction of B-spline surface such that it interpolates the four given bound- ary curves and simultaneously approximates some given inner points. The main idea of our method is： first, we construct an initial surface which interpolates the four given boundary curves; then, while keeping the boundary control points of the initial surface un- changed, we reposition the inner control points of the surface with energy optimization method. Examples show that our algorithm is practicable and effective.

Finding Intersection Points of Curves and Surfaces for Solid Modeling in Curved-Surface Environment

Intersecting is an important factor which influences the effociency androbustness of Boolean algorithms in solid modeling based on surved-surfaces,andintersecting algorithms are closely related to geometric representations of curved-surfaces.Although surfaces can be commonly represented with NURBS,unnecessary complexitiesare caused in the intersecting of quadric surfaces.Quadrics are frequently used to des-cribe geometric features of shafts,holes and grooves etc.in mechanical part designing,therefore;their intersection algorithms are required to have higher accuracy,higher efficiency and higher robustness.For this reason,a practical representation ofquadric surfaces is studied in detail,and on the basis of that,algorithms of intersectingpoints are developed between quadric suraces and their boundaies,i.e.,conics,quarticnonplanar space curves.

Multiresolution for Closed Curves and Surfaces Using Wavelets

Multiresolution modeling is becoming a powerful tool for fast display, and geometric data compression and transmission of complex shapes. Most of the existing literatures investigating the multiresolution for B-spline curves and surfaces are concentrated on open ones. In this paper, we focus on the multiresolution representations and editing of closed B-spline curves and surfaces using wavelets. A repetition approach is adopted for the multiresolution analysis of closed B-spline curves and surfaces. Since the closed curve or surface itself is periodic, it can overcome the drawback brought by the repetition method, i.e. introducing the discontinuities at the boundaries. Based on the models at different multiresolution levels, the multiresolution editing methods of closed curves and surfaces are introduced. Users can edit the overall shape of a closed one while preserving its details, or change its details without affecting its overall shape.

B-Spline曲线聚风装置直线翼垂直轴风力机启动性能数值模拟

为了提升直线翼垂直轴风力机的启动性能,基于B-Spline曲线生成方法,提出一种具有流线型轮廓的聚风装置,将其分别安装在风轮顶端和底端,用以提升风轮附近的来流风速,使风轮汲取更多风能,达到更易启动的特点.选取聚风装置的5个结构参数进行设计:聚风装置与风轮间隙距离ΔL、底圆半径R_(1)、顶圆半径R_(2)、入口角度α_(1)和出口角度α_(2).设计方法采用二次旋转正交组合筛选最优模型,通过三维数值模拟研究聚风装置参数对直线翼垂直轴风力机启动性能的影响,获得了最佳外形参数组合.此外,对有无加装聚风装置的直线翼垂直轴风力机进行了静态三维数值模拟.结果表明,通过添加具有外凸流线型轮廓的聚风装置,直线翼垂直轴风力机的启动性能有显著提升.在风速较低的情况下,性能改善更加明显.聚风装置可使直线翼垂直轴风力机的平均启动力矩系数最大增加38.8%,峰值平均启动力矩系数最大可增加31.2%.

STUDY ON THE METHOD OF CONSTRUCTING RATIONAL CUBIC CURVES AND CURVED SURFACE INCLUDING CONTROLLING PARAMETERS

By adopting the method of controlling parameters this paper describes the construction of various kinds of cubic curve segment and curved surface fragment with rational and non rational parameters, and discusses the relationship between controlling parameters, weighted factors and types, kinds and characteristics of curve segments and curved surface fragments. A mathematical method is provided for CAGD with abundant connotations, broad covering region, convenience, flexibility and direct simplicity.

基于三维曲面Spline模型研究中国不同地区的磁场分布

利用地面台站以及子午工程测点,CHAMP卫星实测数据,建立了中国地区主磁场的三维曲面Spline(3DSS)模型。基于该模型进行了我国的高原地区(青藏高原28°N-38°N,78°E-102°E)、平原地区(长江中下游平原27°N-34°N,111°E-122°E)以及海洋地区(东海和南海部分区域16°N-30°N,123°E-136°E)的磁场模拟。分别基于高原及平原的实测数据建立了各自的3DSS模型。另外分别建立了对应的二维Taylor(2DTY)、三维Taylor多项式(3DTY)模型以比较验证。建模时考虑了所有测点的场源移除、地面及卫星数据间的数据真空、边界效应等问题。为了考察模型相对于实测值的模拟精度,对三个地区分别选取若干个测点不参与建模,将所建模型分别模拟这些测点,并计算残差、变化率及均方根偏差(RMSE)。结果显示无论是全国3DSS模型还是小区域3DSS模型,其变化率除了Y分量略大,其余分量都在1%以内,模拟精度均要好于2DTY和3DTY模型。小区域(高原及平原)3DSS模型能较好反映区域磁场分布。模型对高原的拟合最好,平原次之,海洋地区最差,说明3DSS模型不需要太多的测点即可完成建模,但建模精度依赖于测点的数量及分布。

Computing B-Spline Surfaces on Transputer Networks

This paper presents a parallel implementation of computing uniform bicubic B spline surfaces on Transputer networks. The work is essential for building Transputer based CAD and graphics systems.

RESEARCH ON NURBS SKINNING SURFACE VIA COMPLEX CURVES

In order to design the production with complex external shapes, a newmethod is put forward using non-uniform rational B-spline(NURBS)curves to unifythe description of complex curves composed of several segments with different degrees,and then these complex curves are used to construct NURBS skinning surface. Somekinds of skills are used to dispose the knot of NURBS curves and surfaces for practicalproblems. Finally, the method is verified by several complex examples.

Programmable robotized‘transfer-and-jet’printing for large,3D curved electronics on complex surfaces

Large,3D curved electronics are a trend of the microelectronic industry due to their unique ability to conformally coexist with complex surfaces while retaining the electronic functions of 2D planar integrated circuit technologies.However,these curved electronics present great challenges to the fabrication processes.Here,we propose a reconfigurable,mask-free,conformal fabrication strategy with a robot-like system,called robotized‘transfer-and-jet’printing,to assemble diverse electronic devices on complex surfaces.This novel method is a ground-breaking advance with the unique capability to integrate rigid chips,flexible electronics,and conformal circuits on complex surfaces.Critically,each process,including transfer printing,inkjet printing,and plasma treating,are mask-free,digitalized,and programmable.The robotization techniques,including measurement,surface reconstruction and localization,and path programming,break through the fundamental constraints of 2D planar microfabrication in the context of geometric shape and size.The transfer printing begins with the laser lift-off of rigid chips or flexible electronics from donor substrates,which are then transferred onto a curved surface via a dexterous robotic palm.Then the robotic electrohydrodynamic printing directly writes submicrometer structures on the curved surface.Their permutation and combination allow versatile conformal microfabrication.Finally,robotized hybrid printing is utilized to successfully fabricate a conformal heater and antenna on a spherical surface and a flexible smart sensing skin on a winged model,where the curved circuit,flexible capacitive and piezoelectric sensor arrays,and rigid digital–analog conversion chips are assembled.Robotized hybrid printing is an innovative printing technology,enabling additive,noncontact and digital microfabrication for 3D curved electronics.

A New Dynamics Analysis Model for Five-Axis Machining of Curved Surface Based on Dimension Reduction and Mapping

The equipment used in various fields contains an increasing number of parts with curved surfaces of increasing size.Five-axis computer numerical control(CNC)milling is the main parts machining method,while dynamics analysis has always been a research hotspot.The cutting conditions determined by the cutter axis,tool path,and workpiece geometry are complex and changeable,which has made dynamics research a major challenge.For this reason,this paper introduces the innovative idea of applying dimension reduction and mapping to the five-axis machining of curved surfaces,and proposes an efficient dynamics analysis model.To simplify the research object,the cutter position points along the tool path were discretized into inclined plane five-axis machining.The cutter dip angle and feed deflection angle were used to define the spatial position relationship in five-axis machining.These were then taken as the new base variables to construct an abstract two-dimensional space and establish the mapping relationship between the cutter position point and space point sets to further simplify the dimensions of the research object.Based on the in-cut cutting edge solved by the space limitation method,the dynamics of the inclined plane five-axis machining unit were studied,and the results were uniformly stored in the abstract space to produce a database.Finally,the prediction of the milling force and vibration state along the tool path became a data extraction process that significantly improved efficiency.Two experiments were also conducted which proved the accuracy and efficiency of the proposed dynamics analysis model.This study has great potential for the online synchronization of intelligent machining of large surfaces.