Split Hopkinson pressure bar (SHPB) has become a frequently used technique to measure the uniaxial compressive stress-strain relation of various engineering materials at high strain-rates. The accuracy of an SHPB test...Split Hopkinson pressure bar (SHPB) has become a frequently used technique to measure the uniaxial compressive stress-strain relation of various engineering materials at high strain-rates. The accuracy of an SHPB test is based on the assumption of uniaxial and uniform stress distribution within the specimen, which, however, is not always satisfied in an actual SHPB test due to the existence of some unavoidable negative factors, e.g., interface friction constrains. Kinetic interface friction tests based on a simple device for engineering materials testing on SHPB tests are performed. A kinetic interface friction model is proposed and validated by implementing it into a numerical model. It shows that the proposed simple device is sufficient to obtain kinetic interface friction results for common SHPB tests. The kinetic friction model should be used instead of the frequently used constant friction model for more accurate numerical simulation of SHPB tests.展开更多
The split Hopkinson pressure bar （SHPB） was used to determine the dynamic compressive strength of the high-strength Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass at strain rate on the order of 102 s^-1. It is shown t...The split Hopkinson pressure bar （SHPB） was used to determine the dynamic compressive strength of the high-strength Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass at strain rate on the order of 102 s^-1. It is shown that at high strain rates beyond about 1 000 s^-1, uniform deformation within the metallic glass specimen could not be achieved and dispersion in the transmitted pulse can lead to discrepancies in measuring the dynamic failure strength of the present Zr-based bulk metallic glass. Based on these reasons, a copper insert was placed between the strike bar and the input bar to obtain reliable and consistent experimental data for testing of the Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass using the SHPB. Negative strain rate sensitivity was found in the present Zr-based bulk metallic glass.展开更多
Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more...Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsl^j bar systems, which include both split Hopkinson pressure bar （SHPB） and split Hopkinson tension bar （SHTB） systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of tech- niques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB （i.e. pulse shaping, momentum-trap and multi-axial loading techniques）. Various measurement techniques for rock tests in SHPB （i.e. X-ray micro computed tomography （CT）, laser gap gauge （LGG）, digital image corre- lation （DIC）, Moir~ method, caustics method, photoelastic coating method, dynamic infrared thermog- raphy） are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements （i.e. dynamic compression, tension, bending and shear tests）, dynamic fracture measurements （i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity）, and dy- namic techniques for studying the influences of temperature and pore water.展开更多
Accurately characterizing the mechanical responses and cracking mechanism of three-dimensional confined fractured rocks under coupled static-dynamic loading is of paramount importance for underground engineering const...Accurately characterizing the mechanical responses and cracking mechanism of three-dimensional confined fractured rocks under coupled static-dynamic loading is of paramount importance for underground engineering construction.Using a modified split Hopkinson pressure bar(SHPB)system,five groups of single-flawed specimens with the axial prestress ratio from 0 to 0.8 are tested at the strain rates in the range of 65-205 s-1under a fixed radial prestress.Our results indicate that both the dynamic strength and total strength show significant positive linear correlations with the strain rate,and the dynamic strength shows more strain rate sensitivity under higher axial prestress.The dynamic strength and corresponding failure strain decrease with increasing axial prestress,while the total strength is barely affected by the axial prestress.The dynamic elastic modulus initially increases before the axial prestress ratio reaches 0.6 and then decreases.The failure pattern of tested specimens changes from single diagonal failure to an“X”shaped conjugated failure as axial prestress increases.Furthermore,the progressive cracking processes of confined single-flawed specimens under different axial prestresses are numerically visualized by the discrete element method(DEM).Based on the displacement trend lines on both sides of cracking surface,five crack types are identified and classified in our simulation.The displacement field distributions of the DEM models reveal that the macroscopic single diagonal failure under lower axial prestress is mainly controlled by mixed tensile-shear cracks,while the“X”shaped conjugated failure under higher axial prestress is shear dominated.展开更多
文摘Split Hopkinson pressure bar (SHPB) has become a frequently used technique to measure the uniaxial compressive stress-strain relation of various engineering materials at high strain-rates. The accuracy of an SHPB test is based on the assumption of uniaxial and uniform stress distribution within the specimen, which, however, is not always satisfied in an actual SHPB test due to the existence of some unavoidable negative factors, e.g., interface friction constrains. Kinetic interface friction tests based on a simple device for engineering materials testing on SHPB tests are performed. A kinetic interface friction model is proposed and validated by implementing it into a numerical model. It shows that the proposed simple device is sufficient to obtain kinetic interface friction results for common SHPB tests. The kinetic friction model should be used instead of the frequently used constant friction model for more accurate numerical simulation of SHPB tests.
基金Sponsored by the Ministerial Level Research Foundation (00J12 1 7 BQ0123)
文摘The split Hopkinson pressure bar （SHPB） was used to determine the dynamic compressive strength of the high-strength Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass at strain rate on the order of 102 s^-1. It is shown that at high strain rates beyond about 1 000 s^-1, uniform deformation within the metallic glass specimen could not be achieved and dispersion in the transmitted pulse can lead to discrepancies in measuring the dynamic failure strength of the present Zr-based bulk metallic glass. Based on these reasons, a copper insert was placed between the strike bar and the input bar to obtain reliable and consistent experimental data for testing of the Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass using the SHPB. Negative strain rate sensitivity was found in the present Zr-based bulk metallic glass.
文摘Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsl^j bar systems, which include both split Hopkinson pressure bar （SHPB） and split Hopkinson tension bar （SHTB） systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of tech- niques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB （i.e. pulse shaping, momentum-trap and multi-axial loading techniques）. Various measurement techniques for rock tests in SHPB （i.e. X-ray micro computed tomography （CT）, laser gap gauge （LGG）, digital image corre- lation （DIC）, Moir~ method, caustics method, photoelastic coating method, dynamic infrared thermog- raphy） are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements （i.e. dynamic compression, tension, bending and shear tests）, dynamic fracture measurements （i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity）, and dy- namic techniques for studying the influences of temperature and pore water.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52039007and 52009086)the Youth Science and Technology Innovation Team of Sichuan Province,China(Grant No.2020JDTD0001)。
文摘Accurately characterizing the mechanical responses and cracking mechanism of three-dimensional confined fractured rocks under coupled static-dynamic loading is of paramount importance for underground engineering construction.Using a modified split Hopkinson pressure bar(SHPB)system,five groups of single-flawed specimens with the axial prestress ratio from 0 to 0.8 are tested at the strain rates in the range of 65-205 s-1under a fixed radial prestress.Our results indicate that both the dynamic strength and total strength show significant positive linear correlations with the strain rate,and the dynamic strength shows more strain rate sensitivity under higher axial prestress.The dynamic strength and corresponding failure strain decrease with increasing axial prestress,while the total strength is barely affected by the axial prestress.The dynamic elastic modulus initially increases before the axial prestress ratio reaches 0.6 and then decreases.The failure pattern of tested specimens changes from single diagonal failure to an“X”shaped conjugated failure as axial prestress increases.Furthermore,the progressive cracking processes of confined single-flawed specimens under different axial prestresses are numerically visualized by the discrete element method(DEM).Based on the displacement trend lines on both sides of cracking surface,five crack types are identified and classified in our simulation.The displacement field distributions of the DEM models reveal that the macroscopic single diagonal failure under lower axial prestress is mainly controlled by mixed tensile-shear cracks,while the“X”shaped conjugated failure under higher axial prestress is shear dominated.
