A novel compression method for mechanical vibrating signals,binding with sub-band vector quantization(SVQ) by wavelet packet transformation(WPT) and discrete cosine transformation(DCT) is proposed.Firstly,the vibratin...A novel compression method for mechanical vibrating signals,binding with sub-band vector quantization(SVQ) by wavelet packet transformation(WPT) and discrete cosine transformation(DCT) is proposed.Firstly,the vibrating signal is decomposed into sub-bands by WPT.Then DCT and adaptive bit allocation are done per sub-band and SVQ is performed in each sub-band.It is noted that,after DCT,we only need to code the first components whose numbers are determined by the bits allocated to that sub-band.Through an actual signal,our algorithm is proven to improve the signal-to-noise ratio(SNR) of the reconstructed signal effectively,especially in the situation of lowrate transmission.展开更多
In this paper, we suggest applying tree structure on the sinusoidal parameters. The suggested sinusoidal coder is targeted to find the coded sinusoidal parameters obtained by minimizing a likelihood function in a leas...In this paper, we suggest applying tree structure on the sinusoidal parameters. The suggested sinusoidal coder is targeted to find the coded sinusoidal parameters obtained by minimizing a likelihood function in a least square (LS) sense. From a rate-distortion standpoint, we address the problem of how to allocate available bits among different frequency bands to code sinusoids at each frame. For further analyzing the quantization behavior of the proposed method, we assess the quantization performance with respect to other methods: the short-time Fourier transform (STFT) based coder commonly used for speech enhancement or separation, and the line spectral frequency (LSF) coder used in speech coding. Through extensive simulations, we show that the proposed quantizer leads to less spectral distortion as well as higher perceived quality for the re-synthesized signals based on the coded parameters in a model-based approach with respect to previous STFT-based methods. The proposed method lowers the complexity, and, due to its tree-structure, leads to a rapid search capability. It provides flexibility for use in many speaker-independent applications by finding the most likely frequency vectors selected from a list of frequency candidates. Therefore, the proposed quantizer can be considered an attractive candidate for model-based speech applications in both speaker-dependent and speaker-independent scenarios.展开更多
A Bark-band residual noise model integrated with the human hearing mechanism is proposed to efficiently complement sinusoidal model in parametric audio coding. The time-varying spectrum of the residual noise is retrie...A Bark-band residual noise model integrated with the human hearing mechanism is proposed to efficiently complement sinusoidal model in parametric audio coding. The time-varying spectrum of the residual noise is retrieved by Bark-scale piecewise constant magnitude estimates along with random phases. In the proposed noise model, Bark bands information is obtained by short-time FFT method and window overlap-add technique is exploited to remove boundary discontinuities. SVQ is also incorporated into parameter quantization process for the low bit-rate coding demand. Simulation results and informal listening tests show that when the sinusoidal model is combined with the Bark-band noise model, better synthesis audio quality can be achieved compared with the original sinusoidal modeling audio codec.展开更多
基金Supported by the National Natural Science Foundation of China(No.51135001)
文摘A novel compression method for mechanical vibrating signals,binding with sub-band vector quantization(SVQ) by wavelet packet transformation(WPT) and discrete cosine transformation(DCT) is proposed.Firstly,the vibrating signal is decomposed into sub-bands by WPT.Then DCT and adaptive bit allocation are done per sub-band and SVQ is performed in each sub-band.It is noted that,after DCT,we only need to code the first components whose numbers are determined by the bits allocated to that sub-band.Through an actual signal,our algorithm is proven to improve the signal-to-noise ratio(SNR) of the reconstructed signal effectively,especially in the situation of lowrate transmission.
文摘In this paper, we suggest applying tree structure on the sinusoidal parameters. The suggested sinusoidal coder is targeted to find the coded sinusoidal parameters obtained by minimizing a likelihood function in a least square (LS) sense. From a rate-distortion standpoint, we address the problem of how to allocate available bits among different frequency bands to code sinusoids at each frame. For further analyzing the quantization behavior of the proposed method, we assess the quantization performance with respect to other methods: the short-time Fourier transform (STFT) based coder commonly used for speech enhancement or separation, and the line spectral frequency (LSF) coder used in speech coding. Through extensive simulations, we show that the proposed quantizer leads to less spectral distortion as well as higher perceived quality for the re-synthesized signals based on the coded parameters in a model-based approach with respect to previous STFT-based methods. The proposed method lowers the complexity, and, due to its tree-structure, leads to a rapid search capability. It provides flexibility for use in many speaker-independent applications by finding the most likely frequency vectors selected from a list of frequency candidates. Therefore, the proposed quantizer can be considered an attractive candidate for model-based speech applications in both speaker-dependent and speaker-independent scenarios.
文摘A Bark-band residual noise model integrated with the human hearing mechanism is proposed to efficiently complement sinusoidal model in parametric audio coding. The time-varying spectrum of the residual noise is retrieved by Bark-scale piecewise constant magnitude estimates along with random phases. In the proposed noise model, Bark bands information is obtained by short-time FFT method and window overlap-add technique is exploited to remove boundary discontinuities. SVQ is also incorporated into parameter quantization process for the low bit-rate coding demand. Simulation results and informal listening tests show that when the sinusoidal model is combined with the Bark-band noise model, better synthesis audio quality can be achieved compared with the original sinusoidal modeling audio codec.
