Control of Vortex Shedding and Drag Reduction through Dual Splitter Plates Attached to a Square Cylinder

In this paper we have made a numerical study on the control of vortex shedding and drag reduction of a cylinder by attaching thin splitter plates. The wake structure of the cylinder of square cross-section with attached splitter plates is analyzed for a range of Reynolds number, based on the incident stream and height of the cylinder, in the laminar range. The Navier-Stokes equations governing the flow are solved by the control volume method over a staggered grid arrangement. We have used the semi-implicit method for pressure-linked equation （SIMPLE） algorithm for computation. Our results show that the presence of a splitter plate upstream of the cylinder reduces the drag, but it has a small impact on the vortex shedding frequency when the plate length is beyond 1.5 time the height of the cylinder. The presence of a downstream splitter plate dampens the vortex shedding frequency. The entrainment of fluid into the inner side of the separated shear layers is obstructed by the downstream splitter plate. Our results suggest that by attaching in-line splitter plates both upstream and downstream of the cylinder, the vortex shedding can be suppressed, as well as a reduction in drag be obtained. We made a parametric study to determine the optimal length of these splitter plates so as to achieve low drag and low vortex shedding frequency.

Effect of subsurface impurity defects on laser damage resistance of beam splitter coatings

The laser-induced damage threshold(LIDT)of plate laser beam splitter(PLBS)coatings is closely related to the subsurface absorption defects of the substrate.Herein,a two-step deposition temperature method is proposed to understand the effect of substrate subsurface impurity defects on the LIDT of PLBS coatings.Firstly,BK7 substrates are heat-treated at three different temperatures.The surface morphology and subsurface impurity defect distribution of the substrate before and after the heat treatment are compared.Then,a PLBS coating consisting of alternating HfO2–Al2O3 mixture and SiO2 layers is designed to achieve a beam-splitting ratio(transmittance to reflectance,s-polarized light)of approximately 50:50 at 1053 nm and an angle of incidence of 45◦,and it is prepared under four different deposition processes.The experimental and simulation results show that the subsurface impurity defects of the substrate migrate to the surface and accumulate on the surface during the heat treatment,and become absorption defect sources or nodule defect seeds in the coating,reducing the LIDT of the coating.The higher the heat treatment temperature,the more evident the migration and accumulation of impurity defects.A lower deposition temperature(at which the coating can be fully oxidized)helps to improve the LIDT of the PLBS coating.When the deposition temperature is 140◦C,the LIDT(s-polarized light,wavelength:1064 nm,pulse width:9 ns,incident angle:45◦)of the PLBS coating is 26.2 J/cm2,which is approximately 6.7 times that of the PLBS coating deposited at 200◦C.We believe that the investigation into the laser damage mechanism of PLBS coatings will help to improve the LIDT of coatings with partial or high transmittance at laser wavelengths.

Control of vortex-induced vibrations of the cylinder by using split-ter plates immersed in the cylinder wake at low Reynolds number

The vortex-induced vibrations of a cylinder with two plates symmetrically distributed along the centerline of the wake are studied by using the fluid-structure interaction simulations on the Arbitrary Lagrangian-Eulerian method.In this study,the different geo-metrical distribution parameters of the splitter plates and inflow velocities are taken into account.The physical mechanisms of vortex-induced vibration of the cylinder with symmetrical plates are revealed from the cylinder amplitude,hydrodynamic force characteristics,vortex shedding frequency,and flow pattern modification.The results show that the dynamic interaction between the vortex shed from the oscillation cylinder and plates is responsible for the wake stabilization mechanism,and the stable wake and the dynamic response reduction of the main cylinder can be achieved at a wide range of reduced velocities by placing sym-metrical sheets at suitable locations.

Numerical Research of Flow past a Circular Cylinder with Splitter Plate at a Subcritical Reynolds Number Region

Numerical research of flow past a circular cylinder with a splitter at the subcritical Reynolds number region of 5 × 10~4—9 × 10~4 was researched based on Computational Fluid Dynamics(CFD) through solving twodimensional incompressible unsteady Reynolds-averaged Navier-Stokes(URANS) equations with the shear stress transport(SST) k-ω turbulence model. Three different grid resolutions were employed in the verification and validation study of the adopted turbulence model. Various fluid characteristics such as Strouhal number, lift coefficient of the cylinder and the splitter with respect to various splitter lengths and different Reynolds numbers were investigated. It was revealed that the lift coefficient ratio of the splitter over the cylinder remains near 1.6 when the splitter length is 1.5—4 times the cylinder's diameter. Vortex shedding is strongly inhibited when the splitter length is greater than a critical value of around four times the cylinder's diameter. The phase difference of the lift coefficient on the upper and lower surface of the splitter varies between-30?and 30?. The maximal lift coefficients are reached when the splitter length is about 2 times the cylinder's diameter. Besides, the splitter length has little influence on the separation angle around the cylinder.