Material utilization is mainly concerned by industrialpractitioners since it contributes to minimize the totalproduction costs for garment manufacturing. Apart fromthe marker loss, splice loss (the fabric loss during ...Material utilization is mainly concerned by industrialpractitioners since it contributes to minimize the totalproduction costs for garment manufacturing. Apart fromthe marker loss, splice loss (the fabric loss during thejoining of different fabric rolls) is one of the primarycauses of fabric loss, but it has not been considered spe-cifically in the past literatures. The amount of splice lossduring fabric spreading is governed by various factors in-cluding the marker length, the number of fabric rolls,and the number of splicing intervals for laying-up. Inour study, these three effects on splice loss during fabricspreading were computed and analysed.展开更多
This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation propert...This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation properties. The modified approach uses a combination of the tradional ceiling bounce method and a statistical approach. The effects of different transmitter-receiver separations and height of the ceiling on path loss and delay spread are studied in detail.展开更多
The proton beam energy determines the range of particles and thus where the dose is deposited. According to the depth of tumors, an energy degrader is needed to modulate the proton beam energy in proton therapy facili...The proton beam energy determines the range of particles and thus where the dose is deposited. According to the depth of tumors, an energy degrader is needed to modulate the proton beam energy in proton therapy facilities based on cyclotrons, because the energy of beam extracted from the cyclotron is fixed. The energy loss was simulated for the graphite degrader used in the beamline at the superconducting cyclotron of 200 MeV in Hefei(SC200). After adjusting the mean excitation energy of the graphite used in the degrader to 76 eV, we observed an accurate match between the simulations and measurements.We also simulated the energy spread of the degraded beam and the transmission of the degrader using theoretical formulae. The results agree well with the Monte Carlo simulation.展开更多
Based on the target scatterer density, the range-spread target detection of high-resolution radar is addressed in additive non-Gaussian clutter, which is modeled as a spherically invariant random vector. Firstly, for ...Based on the target scatterer density, the range-spread target detection of high-resolution radar is addressed in additive non-Gaussian clutter, which is modeled as a spherically invariant random vector. Firstly, for sparse scatterer density, the detection of target scatterer in each range cell is derived, and then an M/K detector is proposed to detect the whole range-spread target. Se- condly, an integrating detector is devised to detect a range-spread target with dense scatterer density. Finally, to make the best of the advantages of M/K detector and integrating detector, a robust detector based on scatterer density （DBSD） is designed, which can reduce the probable collapsing loss or quantization error ef- fectively. Moreover, the density decision factor of DBSD is also determined. The formula of the false alarm probability is derived for DBSD. It is proved that the DBSD ensures a constant false alarm rate property. Furthermore, the computational results indi- cate that the DBSD is robust to different clutter one-lag correlations and target scatterer densities. It is also shown that the DBSD out- performs the existing scatterer-density-dependent detector.展开更多
文摘Material utilization is mainly concerned by industrialpractitioners since it contributes to minimize the totalproduction costs for garment manufacturing. Apart fromthe marker loss, splice loss (the fabric loss during thejoining of different fabric rolls) is one of the primarycauses of fabric loss, but it has not been considered spe-cifically in the past literatures. The amount of splice lossduring fabric spreading is governed by various factors in-cluding the marker length, the number of fabric rolls,and the number of splicing intervals for laying-up. Inour study, these three effects on splice loss during fabricspreading were computed and analysed.
文摘This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation properties. The modified approach uses a combination of the tradional ceiling bounce method and a statistical approach. The effects of different transmitter-receiver separations and height of the ceiling on path loss and delay spread are studied in detail.
基金supported in part by the National Natural Science Foundation of China(No.51525703)
文摘The proton beam energy determines the range of particles and thus where the dose is deposited. According to the depth of tumors, an energy degrader is needed to modulate the proton beam energy in proton therapy facilities based on cyclotrons, because the energy of beam extracted from the cyclotron is fixed. The energy loss was simulated for the graphite degrader used in the beamline at the superconducting cyclotron of 200 MeV in Hefei(SC200). After adjusting the mean excitation energy of the graphite used in the degrader to 76 eV, we observed an accurate match between the simulations and measurements.We also simulated the energy spread of the degraded beam and the transmission of the degrader using theoretical formulae. The results agree well with the Monte Carlo simulation.
基金supported by the National Natural Science Foundation of China (61102166)the Scientific Research Foundation of Naval Aeronautical and Astronautical University for Young Scholars (HY2012)
文摘Based on the target scatterer density, the range-spread target detection of high-resolution radar is addressed in additive non-Gaussian clutter, which is modeled as a spherically invariant random vector. Firstly, for sparse scatterer density, the detection of target scatterer in each range cell is derived, and then an M/K detector is proposed to detect the whole range-spread target. Se- condly, an integrating detector is devised to detect a range-spread target with dense scatterer density. Finally, to make the best of the advantages of M/K detector and integrating detector, a robust detector based on scatterer density （DBSD） is designed, which can reduce the probable collapsing loss or quantization error ef- fectively. Moreover, the density decision factor of DBSD is also determined. The formula of the false alarm probability is derived for DBSD. It is proved that the DBSD ensures a constant false alarm rate property. Furthermore, the computational results indi- cate that the DBSD is robust to different clutter one-lag correlations and target scatterer densities. It is also shown that the DBSD out- performs the existing scatterer-density-dependent detector.
