When producing special-shape spring in CNC spring coiler,the setup of the coiler is often a manual work using a trial-and-error method.As a result,the setup of coiler consumes so much time and becomes the bottleneck o...When producing special-shape spring in CNC spring coiler,the setup of the coiler is often a manual work using a trial-and-error method.As a result,the setup of coiler consumes so much time and becomes the bottleneck of the spring production process.In order to cope with this situation,this paper proposes an automatic generation system of setup for CNC spring coiler us- ing case-based reasoning(CBR).The core of the study contains:(1)integrated reasoning model of CBR system;(2)spatial shape describe of special-shape spring based on feature;(3)coiling case representation using shape feature matrix;and(4)case similari- ty measure algorithm.The automatic generation system has implemented with C++Builder 6.0 and is helpful in improving the automaticity and efficiency of spring coiler.展开更多
Abstract： A new low-cost seismic isolation system based on spring tube bracings has been proposed and studied at the Structural and Earthquake Engineering Laboratory of Istanbul Technical University. Multiple compres...Abstract： A new low-cost seismic isolation system based on spring tube bracings has been proposed and studied at the Structural and Earthquake Engineering Laboratory of Istanbul Technical University. Multiple compression-type springs are positioned in a special cylindrical tube to obtain a symmetrical response in tension and compression-type axial loading. An isolation floor, which consists of pin-ended steel columns and spring tube bracings, is constructed at the foundation level or any intermediate level of the building. An experimental campaign with three stages was completed to evaluate the capability of the system. First, the behavior of the spring tubes subjected to axial displacement reversals with varying frequencies was determined. In the second phase, the isolation floor was assessed in the quasi-static tests. Finally, a scaled 3D steel frame was tested on the shake table using actual acceleration records. The transmitted acceleration to the floor levels is greatly diminished because of the isolation story, which effects longer period and higher damping. There are no stability and self- centering problems in the isolation floor.展开更多
The objective of this work was to study the vibration transmissibility characteristics of the undamped and damped smart spring systems. The frequency response characteristics of them were analyzed by using the equival...The objective of this work was to study the vibration transmissibility characteristics of the undamped and damped smart spring systems. The frequency response characteristics of them were analyzed by using the equivalent linearization technique, and the possible types of the system motion were distinguished by using the starting and ending frequencies. The influences of system parameters on the vibration transmissibility characteristics were discussed. The following conclusions may be drawn from the analysis results. The undamped smart spring system may simultaneously have one starting frequency and one ending frequency or only have one starting frequency, and the damped system may simultaneously have two starting frequencies and one ending frequency. There is an optimal control parameter to make the peak value of the vibration transmissibility curve of the system be minimum. When the mass ratio is far away from the stiffness ratio, the vibration transmissibility is small. The effect of the damping ratio on the system vibration transmissibility is significant while the control parameter is less than its optimal value. But the influence of the relative damping ratio on the vibration transmissibility is small.展开更多
Warm compaction behaviors and their affecting factors such as compaction temperature, compaction pressure and lubricant concentration were studied. Effect of die wall lubrication on the powder’s warm compaction behav...Warm compaction behaviors and their affecting factors such as compaction temperature, compaction pressure and lubricant concentration were studied. Effect of die wall lubrication on the powder’s warm compaction behavior was also studied. The use of smaller size colloidal graphite investigated can give a higher compact density and lesser spring back effect than the use of flake graphite.展开更多
Continuum-based discrete element method(CDEM)is an explicit numerical method used for simulation of progressive failure of geological body.To improve the efficiency of contact detection and simplify the calculation st...Continuum-based discrete element method(CDEM)is an explicit numerical method used for simulation of progressive failure of geological body.To improve the efficiency of contact detection and simplify the calculation steps for contact forces,semi-spring and semi-edge are introduced in calculation.Semispring is derived from block vertex,and formed by indenting the block vertex into each face(24semisprings for a hexahedral element).The formation process of semi-edge is the same as that of semi-spring(24semi-edges for a hexahedral element).Based on the semi-springs and semi-edges,a new type of combined contact model is presented.According to this model,six contact types could be reduced to two,i.e.the semi-spring target face contact and semi-edge target edge contact.By the combined model,the contact force could be calculated directly(the information of contact type is not necessary),and the failure judgment could be executed in a straightforward way(each semi-spring and semi-edge own their characteristic areas).The algorithm has been successfully programmed in C++program.Some simple numerical cases are presented to show the validity and accuracy of this model.Finally,the failure mode,sliding distance and critical friction angle of Jiweishan landslide are studied with the combined model.展开更多
基金Supported by the Doctoral Programme Foundation of Education Ministry of China under the grant(No.20050699033)
文摘When producing special-shape spring in CNC spring coiler,the setup of the coiler is often a manual work using a trial-and-error method.As a result,the setup of coiler consumes so much time and becomes the bottleneck of the spring production process.In order to cope with this situation,this paper proposes an automatic generation system of setup for CNC spring coiler us- ing case-based reasoning(CBR).The core of the study contains:(1)integrated reasoning model of CBR system;(2)spatial shape describe of special-shape spring based on feature;(3)coiling case representation using shape feature matrix;and(4)case similari- ty measure algorithm.The automatic generation system has implemented with C++Builder 6.0 and is helpful in improving the automaticity and efficiency of spring coiler.
基金Research Project 36997 of Istanbul Technical University Research Funds
文摘Abstract： A new low-cost seismic isolation system based on spring tube bracings has been proposed and studied at the Structural and Earthquake Engineering Laboratory of Istanbul Technical University. Multiple compression-type springs are positioned in a special cylindrical tube to obtain a symmetrical response in tension and compression-type axial loading. An isolation floor, which consists of pin-ended steel columns and spring tube bracings, is constructed at the foundation level or any intermediate level of the building. An experimental campaign with three stages was completed to evaluate the capability of the system. First, the behavior of the spring tubes subjected to axial displacement reversals with varying frequencies was determined. In the second phase, the isolation floor was assessed in the quasi-static tests. Finally, a scaled 3D steel frame was tested on the shake table using actual acceleration records. The transmitted acceleration to the floor levels is greatly diminished because of the isolation story, which effects longer period and higher damping. There are no stability and self- centering problems in the isolation floor.
基金Project(51375226)supported by the National Natural Science Foundation of ChinaProject(20113218110017)supported by the Doctoral Program Foundation of Institutions of Higher Education of China+2 种基金Project(PAPD)supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,ChinaProject(CXZZ11_0199)supported by the Funding of Jiangsu Innovation Program for Graduate Education,ChinaProject(2014)supported by the the Fundamental Research Funds for the Central Universities,China
文摘The objective of this work was to study the vibration transmissibility characteristics of the undamped and damped smart spring systems. The frequency response characteristics of them were analyzed by using the equivalent linearization technique, and the possible types of the system motion were distinguished by using the starting and ending frequencies. The influences of system parameters on the vibration transmissibility characteristics were discussed. The following conclusions may be drawn from the analysis results. The undamped smart spring system may simultaneously have one starting frequency and one ending frequency or only have one starting frequency, and the damped system may simultaneously have two starting frequencies and one ending frequency. There is an optimal control parameter to make the peak value of the vibration transmissibility curve of the system be minimum. When the mass ratio is far away from the stiffness ratio, the vibration transmissibility is small. The effect of the damping ratio on the system vibration transmissibility is significant while the control parameter is less than its optimal value. But the influence of the relative damping ratio on the vibration transmissibility is small.
文摘Warm compaction behaviors and their affecting factors such as compaction temperature, compaction pressure and lubricant concentration were studied. Effect of die wall lubrication on the powder’s warm compaction behavior was also studied. The use of smaller size colloidal graphite investigated can give a higher compact density and lesser spring back effect than the use of flake graphite.
基金the National Basic Research Program of the Ministry of Science and Technology of China (Grant No. 2010CB731506)the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2012BAK10B01)the Youth Science Fund of National Natural Science Foundation of China (Grant No. 11302230)
文摘Continuum-based discrete element method(CDEM)is an explicit numerical method used for simulation of progressive failure of geological body.To improve the efficiency of contact detection and simplify the calculation steps for contact forces,semi-spring and semi-edge are introduced in calculation.Semispring is derived from block vertex,and formed by indenting the block vertex into each face(24semisprings for a hexahedral element).The formation process of semi-edge is the same as that of semi-spring(24semi-edges for a hexahedral element).Based on the semi-springs and semi-edges,a new type of combined contact model is presented.According to this model,six contact types could be reduced to two,i.e.the semi-spring target face contact and semi-edge target edge contact.By the combined model,the contact force could be calculated directly(the information of contact type is not necessary),and the failure judgment could be executed in a straightforward way(each semi-spring and semi-edge own their characteristic areas).The algorithm has been successfully programmed in C++program.Some simple numerical cases are presented to show the validity and accuracy of this model.Finally,the failure mode,sliding distance and critical friction angle of Jiweishan landslide are studied with the combined model.
