Molecular dynamics(MD) simulations using the polymer consistent force field(PCFF) were adopted to investigate the pressure and thickness dependent density of squalane film in a nanogap at 373 K, with three differe...Molecular dynamics(MD) simulations using the polymer consistent force field(PCFF) were adopted to investigate the pressure and thickness dependent density of squalane film in a nanogap at 373 K, with three different initial film thicknesses, and for a wide range of pressures. The equivalent densities predicted by MD simulations were compared with the empirical data. Results show that the squalane atoms tend to form layers parallel to the confining substrates but the orientations of squalane molecules are irregular throughout the film. In addition, distinct excluded volumes are not found at the interfaces of the film and substrates. Furthermore, with the same initial film thickness h_0, the film thickness h and compressibility decrease with increasing pressure, but the compressibility is similar for films with different initial film thicknesses. The equivalent densities predicted by MD simulations with the maximum initial film thickness(9.44 nm) are accurate to the values of Tait equation. The MD simulation with adequate initial film thickness can accurately and conveniently predict the bulk densities of lubricants.展开更多
Mechanical systems on all length scales may be subjected to nanoscale thin film lubrication(TFL). Molecular dynamics(MD) simulations were conducted to investigate the lubrication mechanism and boundary slip of squalan...Mechanical systems on all length scales may be subjected to nanoscale thin film lubrication(TFL). Molecular dynamics(MD) simulations were conducted to investigate the lubrication mechanism and boundary slip of squalane confined in nanogap at 293 K with two different film thicknesses and a wide range of pressures. The molecular distribution, density and velocity profiles of squalane were analyzed. The results show that the lubricant atoms tend to form layers parallel to the wall, but the lubricant molecules orient randomly throughout the film in the directions both parallel and perpendicular to the wall. Most squalane molecules appear twisted and folded, and extend to several atomic layers so that there are no slips between lubricant layers. The distances between the lubricant layers are irregular rather than broadening far away from the walls. The boundary slip at the interface of bcc Fe(001) and squalane only occurs at high pressure because of the strong nonbond interactions between lubricant atoms and wall atoms. The tendency of boundary slip is more obvious for films with thinner film thickness. According to the simulations, the relationship between the slip length and the pressure is given.展开更多
基金Funded by the National Natural Science Foundation of China(No.51175085)the Tribology Science Fund of State Key Laboratory of Tribology(No.SKLTKF13A09)the Natural Science Foundation of Fujian Province(No.2016J01226)
文摘Molecular dynamics(MD) simulations using the polymer consistent force field(PCFF) were adopted to investigate the pressure and thickness dependent density of squalane film in a nanogap at 373 K, with three different initial film thicknesses, and for a wide range of pressures. The equivalent densities predicted by MD simulations were compared with the empirical data. Results show that the squalane atoms tend to form layers parallel to the confining substrates but the orientations of squalane molecules are irregular throughout the film. In addition, distinct excluded volumes are not found at the interfaces of the film and substrates. Furthermore, with the same initial film thickness h_0, the film thickness h and compressibility decrease with increasing pressure, but the compressibility is similar for films with different initial film thicknesses. The equivalent densities predicted by MD simulations with the maximum initial film thickness(9.44 nm) are accurate to the values of Tait equation. The MD simulation with adequate initial film thickness can accurately and conveniently predict the bulk densities of lubricants.
基金Funded by the National Natural Science Foundation of China(No.51875105)the Natural Science Foundation of Fujian Province(No.2016J01226).
文摘Mechanical systems on all length scales may be subjected to nanoscale thin film lubrication(TFL). Molecular dynamics(MD) simulations were conducted to investigate the lubrication mechanism and boundary slip of squalane confined in nanogap at 293 K with two different film thicknesses and a wide range of pressures. The molecular distribution, density and velocity profiles of squalane were analyzed. The results show that the lubricant atoms tend to form layers parallel to the wall, but the lubricant molecules orient randomly throughout the film in the directions both parallel and perpendicular to the wall. Most squalane molecules appear twisted and folded, and extend to several atomic layers so that there are no slips between lubricant layers. The distances between the lubricant layers are irregular rather than broadening far away from the walls. The boundary slip at the interface of bcc Fe(001) and squalane only occurs at high pressure because of the strong nonbond interactions between lubricant atoms and wall atoms. The tendency of boundary slip is more obvious for films with thinner film thickness. According to the simulations, the relationship between the slip length and the pressure is given.